JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (PRINT)

Visão geral
Metrics
Identidade
Ver todos

Qualis

A1

código do país

GB

tipo

journal

publicação venue de

α-Tricalcium phosphate cement reinforced with silk fibroin: A high strength biomimetic bone cement with chloride-substituted hydroxyapatite. 143:105936-12. 2023-01-01
Adhesion to lithium disilicate glass-ceramics after aging: Resin viscosity and ceramic surface treatment effects. 105819:105819-105825. 2023-01-01
Analysis of physicochemical properties of endodontic sealers containing rhodamine B. 140:105699. 2023-01-01
Antibacterial and physical properties of resin cements containing MgO nanoparticles. 142:105815. 2023-01-01
Are polywave light-emitting diodes more effective than monowave ones in the photoactivation of resin-based materials containing alternative photoinitiators? A systematic review. 143:1. 2023-01-01
Biomineralization of calcium phosphates functionalized with hydroxyapatite-binding peptide. 146:106082. 2023-01-01
Ceramic surface conditioning, resin cement viscosity, and aging relationships affect the load-bearing capacity under fatigue of bonded glass-ceramics. 139:105667. 2023-01-01
Comparing the accuracy of distinct scanning systems and their impact on marginal/internal adaptation of tooth-supported indirect restorations. A scoping review. 105975:105975. 2023-01-01
Compositional boundaries for functional dental composites containing calcium orthophosphate particles. 144:105928. 2023-01-01
Design as strategy for evaluation of the mechanical properties of binary mixtures composed of poly(methyl vinyl ether-alt-maleic anhydride) and Pluronic F127 for biomedical applications. 138:105608. 2023-01-01
Development of Y-TZP/MWCNT-SiO2 nanocomposite for dental protheses. 143:105888. 2023-01-01
Does the use of antioxidant agents after dental bleaching compromise the aesthetic results of ceramic laminate veneers?. 145:106027. 2023-01-01
Effect of pre-heating methods and devices on the mechanical properties, post-gel shrinkage, and shrinkage stress of bulk-fill materials. 138:105605. 2023-01-01
Effect of preheating on mechanical properties of a resin-based composite containing elastomeric urethane monomer. 141:105758. 2023-01-01
Effect of tribocorrosion on surface-treated titanium alloy implants: A systematic review with meta-analysis. 145:106008. 2023-01-01
Fatigue performance analysis of strength-graded zirconia polycrystals for monolithic three-unit implant-supported prostheses. 140:105736-x. 2023-01-01
Fracture load and failure mode of semi-direct resin composite occlusal veneers: Influence of design and mechanical cycling. 144:105961. 2023-01-01
Gels containing statherin-derived peptide protect against enamel and dentin erosive tooth wear in vitro. 137:105549. 2023-01-01
High-versus low-viscosity resin cements: Its effect on the load-bearing capacity under fatigue of a translucent zirconia. 142:105829--. 2023-01-01
How does the occlusal contact region influence the mechanical fatigue performance and fracture region of monolithic lithium disilicate ceramic crowns?. -:105746. 2023-01-01
Identifying differences in the tribological performance of GUR 1020 and GUR 1050 UHMWPE resins associated to pressure × velocity conditions in linear reciprocating sliding tests. 145:106038. 2023-01-01
In vitro study on how photodynamic therapy and calcium hydroxide medication influence adhesive interface properties of glass-fiber posts to intraradicular dentin. 140:105757-105763. 2023-01-01
Infiltration OF 5Y-PSZ with thermally compatible glass: Strength, microstructure and failure mode analyses. 142:105812. 2023-01-01
Influence of height discrepancy between pulp chamber floor and crestal bone in the mechanical fatigue performance of endodontically-treated teeth restored with resin composite endocrowns. 1:105854-1-12. 2023-01-01
Influence of plane-strain compression on the microstructure and tribological behavior of GUR 1050 UHMWPE. 142:105816. 2023-01-01
Influence of surface finishing and printing layer orientation on surface roughness and flexural strength of stereolithography-manufactured dental zirconia. 143:105944. 2023-01-01
Influence of thickness and degree of opacity of lithium disilicate on the degree of conversion and bond strength of resin cements. 143:105934. 2023-01-01
Is the fluid volume fraction equal to the water content in tendons? Insights on biphasic modeling. 140:105703. 2023-01-01
Manufacturing and characterization of a 3D printed lithium disilicate ceramic via robocasting: A pilot study. 143:105867-.. 2023-01-01
Mechanical and antibacterial properties of an experimental flowable composite containing Nb2O5 and NF_TiO2 nanoparticles.. 100:105919. 2023-01-01
Mechanical comparison of milled fiber-reinforced resin composite and Co-Cr frameworks with different connector cross-sectional geometries: An in vitro study. 105759:105759. 2023-01-01
New dimethacrylate monomers based on phenolphthalein and resveratrol for the application of dental materials. 140:105701. 2023-01-01
Photosensitive resins used in additive manufacturing for oral application in dentistry: A scoping review from lab to clinic. 141:105732-105739. 2023-01-01
Polishing the bonding surface, before or after crystallization, does not alter the fatigue behavior of bonded CAD-CAM lithium disilicate. 142:105794. 2023-01-01
Should finishing, polishing or glazing be performed after grinding YSZ ceramics? A systematic review and meta-analysis. 138:105654. 2023-01-01
Single geometry abutment for narrow and extra-narrow implant systems: Survival and failure modes. 143:105872. 2023-01-01
The combined effects of binder addition and different sintering methods on the mechanical properties of bovine hydroxyapatite.. 144:105993. 2023-01-01
The effect of abutment material stiffness on the mechanical behavior of dental implant assemblies: A 3D finite element study. 142:105847. 2023-01-01
The in vitro effect of solutions with or without sugar in dental bleaching. 142:105821. 2023-01-01
Tribological behavior and wear mechanisms of dental resin composites with different polymeric matrices. 144:105962. 2023-01-01
Ultrashort pulse laser patterning of zirconia (3Y-TZP) for enhanced adhesion to resin-matrix cements used in dentistry: An integrative review. 143:105943. 2023-01-01
Use of Reflectometer Optipen to assess the preventive effect of a sugarcane cystatin on initial dental erosion in vivo. 141:105782. 2023-01-01
Weak adhesion between ceramic and resin cement impairs the load-bearing capacity under fatigue of lithium disilicate glass-ceramic crowns. 138:105604. 2023-01-01
A brief review on fatigue test of ceramic and some related matters in Dentistry. 138:105607. 2022-01-01
A numerical investigation of the mechanics of intracranial aneurysms walls: Assessing the influence of tissue hyperelastic laws and heterogeneous properties on the stress and stretch fields. 136:105498. 2022-01-01
A universal adhesive containing copper nanoparticles improves the stability of hybrid layer in a cariogenic oral environment: An in situ study. 126:105017. 2022-01-01
AFM advanced modes for dental and biomedical applications. 00:105475. 2022-01-01
Adhesive application after ceramic surface treatment is detrimental to load-bearing capacity under fatigue of a lithium disilicate glass-ceramic. 135:105453. 2022-01-01
Biofilm formation and cell viability on monolithic zirconia with silver-doped sodalime glass. 131:105222. 2022-01-01
Biomechanical and histological evaluation of four different implant macrogeometries in the early osseointegration process: An in vivo animal study. 125:104935. 2022-01-01
Chitosan/Xanthan membrane containing hydroxyapatite/Graphene oxide nanocomposite for guided bone regeneration. 136:105464. 2022-01-01
Comparative analysis of tibial plateau fracture osteosynthesis: A finite element study. 1:105392. 2022-01-01
Does adhesive luting promote improved fatigue performance of lithium disilicate simplified crowns?. 134:105373. 2022-01-01
Effect of build orientation in accuracy, flexural modulus, flexural strength, and microhardness of 3D-Printed resins for provisional restorations. 136:105479. 2022-01-01
Effect of different surface treatments on the micro tensile bond strength to dentin, biaxial flexural strength and roughness of CAD/CAM resin composite and polymer infiltrated ceramic. 131:1-10. 2022-01-01
Effect of different tightening protocols on the probability of survival of screw-retained implant-supported crowns. 126:105019. 2022-01-01
Effect of pigmentation techniques on the fatigue mechanical behavior of a translucent zirconia for monolithic restorations. 134:105362. 2022-01-01
Effect of processing methods on the chipping resistance of veneered zirconia. 126:104995. 2022-01-01
Effect of the region of the CAD/CAM block on the flexural strength and structural reliability of restorative materials. 138:105597. 2022-01-01
Effect of the surface finish on the mechanical properties and cellular adhesion in (Ce,Y)-TZP/Al2O3 ceramic composites for denture implants. 134:105363. 2022-01-01
Effects of gastric acid and mechanical toothbrushing in CAD-CAM restorative materials: Mechanical properties, surface topography, and biofilm adhesion. 105606:1-105606. 2022-01-01
Effects of hybrid inorganic-organic nanofibers on the properties of enamel resin infiltrants ? An in vitro study. 126:105067. 2022-01-01
Effects of material and piston diameter on the fatigue behavior, failure mode, and stress distribution of feldspathic ceramic simplified restorations. 134:105398. 2022-01-01
Enhanced mechanical properties, anti-biofilm activity, and cytocompatibility of a methacrylate-based polymer loaded with native multiwalled carbon nanotubes. 1:105511-x. 2022-01-01
Experimental analysis and numerical simulations of the mechanical properties of a (Ce,Y)-TZP/Al2O3/H6A ceramic composite containing coupled toughening mechanisms. 129:105171. 2022-01-01
Flexural strength of 3Y-TZP bioceramics obtained by direct write assembly as function of residual connected-porosity. 126:105035. 2022-01-01
Gelatinolytic activity after dentin pretreatment with dimethyl sulfoxide (DMSO) combined to dental bonding systems: Perspectives for biological responses. 130:105188. 2022-01-01
Immediate dentin sealing influences the fracture strength of ultrathin occlusal veneers made of a polymer-infiltrated ceramic network. 1:105331-7. 2022-01-01
Impact of the removal of filling material from the post space with ultrasonic insert and magnification with a surgical microscope on the bond strength and adhesive interface of multifilament fiberglass posts onto flat-oval root canals. 132:105264. 2022-01-01
In vitro and in vivo performance of self-conditioning sealants with pre-reacted glass for caries prevention. 133:1. 2022-01-01
In vitro characterization of a biocompatible composite based on poly(3-hydroxybutyrate)/hydroxyapatite nanoparticles as a potential scaffold for tissue engineering. -:105138--. 2022-01-01
In vitro study on how antioxidant solutions affect enamel surface characteristics and bonding interface of ceramic laminate veneers luting after dental bleaching. 133:105322. 2022-01-01
In-lab simulation of CAD/CAM grinding and intaglio surface treatments of 4YSZ monolithic restorations: Effect on its load-bearing capacity under fatigue. 134:105417. 2022-01-01
Mechanical characterization of a multi-layered zirconia: Flexural strength, hardness, and fracture toughness of the different layers. 135:105455. 2022-01-01
Multiscale stiffness characterisation of both healthy and osteoporotic bone tissue using subject-specific data. 135:105431. 2022-01-01
Physicochemical properties of experimental resin-based composites using tris(trimethylsilyl)silane associated with diphenyl iodonium hexafluorophosphate (DPIHP) salt. 130:105169. 2022-01-01
Pre-sintering pigmentation techniques do not affect the fatigue behavior of adhesively luted 4YSZ restorations. 105270:105270. 2022-01-01
Prediction of mechanical solutions for a laminated LCEs system fusing an analytical model and neural networks. 125:104918. 2022-01-01
Probability of survival and failure mode of endodontically treated incisors without ferrule restored with CAD/CAM fiber-reinforced composite (FRC) post-cores. 136:105519. 2022-01-01
Role of non-carious cervical lesions multicausality in the behavior of respective restorations. 131:105232. 2022-01-01
Silica deposition on zirconia via room-temperature atomic layer deposition (RT-ALD): Effect on bond strength to veneering ceramic. 129:105142. 2022-01-01
Simulation of CAD/CAM milling on lithium disilicate: Mechanical and topographic analyses of surface grinding different protocols. 132:105278. 2022-01-01
Stability of fatigued and aged ZTA compared to 3Y-TZP and Al2O3 ceramic systems. 135:105451. 2022-01-01
Temporary materials used in prosthodontics: The effect of composition, fabrication mode, and aging on mechanical properties. 133:105333. 2022-01-01
The impact of provisional intraradicular retainers cementation with temporary methacrylate-based resin in the bond strength of glass fiber posts to root dentin.. 135:105486-e10. 2022-01-01
Thickness and internal adjustment of monolithic resin composite milled crowns: Effect on the load-bearing capacity under fatigue. 134:105407. 2022-01-01
Two-body wear resistance and fatigue survival of new Y-TZP and ATZ ceramics made with a new slip-casting method. 136:105535. 2022-01-01
A new design of a multifunctional abutment to morse taper implant connection: Experimental mechanical analysis. 1:104347. 2021-01-01
Adhesion between zirconia and resin cement: A critical evaluation of testing methodologies. 120:104547. 2021-01-01
Alumina particle air-abrasion and aging effects: Fatigue behavior of CAD/CAM resin composite crowns and flexural strength evaluations. 121:104592. 2021-01-01
Bacteria co-culture adhesion on different texturized zirconia surfaces. 123:104786. 2021-01-01
Biaxial flexural strength, crystalline structure, and grain size of new commercially available zirconia-based ceramics for dental appliances produced using a new slip-casting method. 114:104180. 2021-01-01
Biomechanical behavior of functionally graded S53P4 bioglass-zirconia dental implants: Experimental and finite element analyses. 120:104565-xx. 2021-01-01
Comparison between hydroxyapatite/soapstone and hydroxyapatite/reduced graphene oxide composite coatings: Synthesis and property improvement. 121:104618. 2021-01-01
Core-shell nanoparticles based on zirconia covered with silver as an advantageous perspective for obtaining antimicrobial nanocomposites with good mechanical properties and less cytotoxicity. 123:104726-10. 2021-01-01
Corrosion induced fracture of NiTi wires in simulated oral environments. 116:104323. 2021-01-01
Could light-curing time, post-space region and cyclic fatigue affect the nanomechanical behavior of a dual-curing cement for fiber post luting?. 125:1-9. 2021-01-01
Cyclic fatigue tests on non-anatomic specimens of dental ceramic materials: A scoping review. 126:104985. 2021-01-01
Effect of TiF4 varnish after pre-treatment with proanthocyanidin or chlorhexidine on the progression of erosive dentin loss in the presence or absence of the demineralized organic matrix. 115:104287. 2021-01-01
Effect of curing-light attenuation on color stability and physical and chemical properties of resin cements containing different photoinitiators. 113:104110. 2021-01-01
Effect of macrogeometry and bone type on insertion torque, primary stability, surface topography damage and titanium release of dental implants during surgical insertion into artificial bone. 119:104515-11. 2021-01-01
Effect of supplemental acid-etching on the early stages of osseointegration: A preclinical model. 122:104682. 2021-01-01
Effects of alternatively used thermal treatments on the mechanical and fracture behavior of dental resin composites with varying filler content. 117:104424. 2021-01-01
Electric current effects on bond strength, nanoleakage, degree of conversion and dentinal infiltration of adhesive systems. -:104529. 2021-01-01
Evaluation of physico-mechanical properties and filler particles characterization of conventional, bulk-fill, and bioactive resin-based composites. 115:104288-Mar. 2021-01-01
Failure probability and stress distribution of milled porcelain-zirconia crowns with bioinspired/traditional design and graded interface. 119:104438. 2021-01-01
Grinding and polishing of the inner surface of monolithic simplified restorations made of zirconia polycrystals and lithium disilicate glass-ceramic: Effects on the load-bearing capacity under fatigue of the bonded restorations. 124:104833. 2021-01-01
Hydrothermal aging affects the three-dimensional fit and fatigue lifetime of zirconia abutments. 124:104832. 2021-01-01
In vitro and In vivo evaluation of resin composites fluorescence. 114:104223. 2021-01-01
In vitro study on how cold plasma affects dentin surface characteristics. 123:104762. 2021-01-01
In-lab simulation of CAD/CAM milling of lithium disilicate glass-ceramic specimens: Effect on the fatigue behavior of the bonded ceramic. 121:1. 2021-01-01
Influence of surface treatment of resin composite substrate on the load-bearing capacity under fatigue of lithium disilicate monolithic simplified restorations. 124:104792. 2021-01-01
Influence of the foundation substrate on the fatigue behavior of bonded glass, zirconia polycrystals, and polymer infiltrated ceramic simplified CAD-CAM restorations. 117:104391. 2021-01-01
Is the application of a silane-based coupling agent necessary to stabilize the fatigue performance of bonded simplified lithium disilicate restorations?. 126:104989. 2021-01-01
Load-bearing capacity under fatigue and FEA analysis of simplified ceramic restorations supported by peek or zirconia polycrystals as foundation substrate for implant purposes. 123:104760. 2021-01-01
Mechanical performance of a hybrid zirconia developed through hydrothermal treatment and Room-Temperature Atomic Layer Deposition (RT-ALD). 123:1-8. 2021-01-01
Mechanical performances of balloon post-dilation for improving stent expansion in calcified coronary artery: Computational and experimental investigations. 121:104609. 2021-01-01
Mechanical properties and in vitro cytocompatibility of dense and porous Ti-6Al-4V ELI manufactured by selective laser melting technology for biomedical applications. 123:104712. 2021-01-01
Mechanical properties of ceramic composites based on ZrO2 co-stabilized by Y2O3-CeO2 reinforced with Al2O3 platelets for dental implants. 116:104372. 2021-01-01
Microstructural features influencing the mechanical performance of the Brazil nut (Bertholletia excelsa) mesocarp. 116:104306. 2021-01-01
Nanoscale physico-mechanical properties of an aging resistant ZTA composite. 123:104690. 2021-01-01
Optimizing the microstructure of a new machinable bioactive glass-ceramic. 122:104695-XXX. 2021-01-01
Physicochemical characterization, water sorption and solubility of adhesive systems incorporated with titanium tetrafluoride, and its influence on dentin permeability. 119:104453-1. 2021-01-01
Polyvinylidene fluoride - Hydroxyapatite 0-3 biocomposite filaments processed by twin-screw extrusion. 125:104891. 2021-01-01
Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material. -:1-9. 2021-01-01
Synthesis and characterization of experimental endodontic sealers containing bioactive glasses particles of NbG or 45S5. 125:104971-104971. 2021-01-01
The influence of customization of glass fiber posts on fracture strength and failure pattern: A systematic review and meta-analysis of preclinical ex-vivo studies. 118:104433. 2021-01-01
The relation between impact strength and flexural strength of dental materials. 122:104658-000. 2021-01-01
Thermal and mechanical characterization of thermoplastic orthodontic aligners discs after molding process. 126:104991. 2021-01-01
Viscoelasticity of children and adolescent brains through MR elastography. 115:104229. 2021-01-01
3D metal printing in dentistry: An in vitro biomechanical comparative study of two additive manufacturing technologies for full-arch implant-supported prostheses. 108:103821. 2020-01-01
A bone remodeling model governed by cellular micromechanics and physiologically based pharmacokinetics. 1:103657. 2020-01-01
Accelerated loading frequency does not influence the fatigue behavior of polymer infiltrated ceramic network or lithium disilicate glass-ceramic restorations. 110:103905. 2020-01-01
Aging resistance of an experimental zirconia-toughened alumina composite for large span dental prostheses: Optical and mechanical characterization. 103:103659-x. 2020-01-01
Ceramic firing protocols and thermocycling: its effects on the load-bearing capacity under fatigue of a bonded zirconia lithium silicate glass-ceramic. 110:103963. 2020-01-01
Chemistry of novel and contemporary resin-based dental adhesives. 110:103875---. 2020-01-01
Could calcium hypochlorite and grape seed extract keep the mechanical properties of root dentin and fracture resistance of weakened roots?. 106:103736. 2020-01-01
Deformation behavior of normal human enamel: A study by nanoindentation. 108:1037-1042. 2020-01-01
Durability of resin on bleached dentin treated with antioxidant solutions or lasers. 104:103647. 2020-01-01
Durability of staining and glazing on a hybrid ceramics after the three-body wear. 109:103856. 2020-01-01
Effect of TiF4 varnish after pre-treatment with proanthocyanidin or chlorhexidine on the progression of erosive dentin loss in the presence or absence of the demineralized organic matrix. 115:104287. 2020-01-01
Effect of calcium orthophosphate: Reinforcing glass ratio and prolonged water storage on flexural properties of remineralizing composites. 104:103637. 2020-01-01
Effect of hydrothermal aging on the properties of zirconia with different levels of translucency. 109:103847. 2020-01-01
Effect of indenter material on reliability of all-ceramic crowns.. 108:103831. 2020-01-01
Effect of microwave crystallization on the wear resistance of reinforced glass-ceramics. 111:104009. 2020-01-01
Effect of resin cement space on the fatigue behavior of bonded CAD/CAM leucite ceramic crowns. 110:1-7. 2020-01-01
Effect of restorative treatment with endocrown and ferrule on the mechanical behavior of anterior endodontically treated teeth: An in vitro analysis. 1:104019-104019/23. 2020-01-01
Effects of fibrin sealant and bone fragments on defect regeneration performed on rat tibiae: An experimental study. 104:103662. 2020-01-01
Evaluation of the aesthetic effect, enamel microhardness and trans-amelodentinal cytotoxicity of a new bleaching agent for professional use containing trimetaphosphate and fluoride. 114:104225. 2020-01-01
Experimental self-etching resin infiltrants on the treatment of simulated carious white spot lesions. 113:104146. 2020-01-01
Fabrication and characterization of remineralizing dental composites containing hydroxyapatite nanoparticles. 109:103817. 2020-01-01
Fabrication of ZrO2-Bearing lithium-silicate glass-ceramics by pressureless sintering and spark plasma sintering. xx:103709-xx. 2020-01-01
Fatigue performance of distinct CAD/CAM dental ceramics. 103:103540. 2020-01-01
Fatigue performance of fully-stabilized zirconia polycrystals monolithic restorations: The effects of surface treatments at the bonding surface  . 110:1-10. 2020-01-01
Grinding the intaglio surface of yttria partially- and fully-stabilized zirconia polycrystals restorations: Effect on their fatigue behavior. -:103800. 2020-01-01
Grinding, polishing and glazing of the occlusal surface do not affect the load-bearing capacity under fatigue and survival rates of bonded monolithic fully-stabilized zirconia simplified restorations. 103:103528. 2020-01-01
High load frequency at 20Hz: Its effects on the fatigue behavior of a leucite-reinforced glass-ceramic. -:103769. 2020-01-01
Hydrothermal degradation methods affect the properties and phase transformation depth of translucent zirconia. 112:104021. 2020-01-01
In vitro digital image correlation analysis of the strain transferred by screw-retained fixed partial dentures supported by short and conventional implants. 103:103556. 2020-01-01
In-vitro mechanical and biological evaluation of novel zirconia reinforced bioglass scaffolds for bone repair. 114:104164. 2020-01-01
Influence of different ceramic materials and surface treatments on the adhesion of Prevotella intermedia. 1:104010. 2020-01-01
Influence of different light-curing units in surface roughness and gloss of resin composites for bleached teeth after challenges. 102:103458. 2020-01-01
Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations. 102:103457. 2020-01-01
Laser-assisted production of HAp-coated zirconia structured surfaces for biomedical applications. xx:104049-xx. 2020-01-01
Metformin-loaded nanospheres laden photocrosslinkable gelatin hydrogel for bone tissue engineering. 116:104293. 2020-01-01
Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering. 102:103516. 2020-01-01
Microstructure and mechanical properties of fully sintered zirconia glazed with an experimental glass. 113:104093. 2020-01-01
New antimicrobial and collagen crosslinking formulated dentin adhesive with improved bond durability. 110:103927. 2020-01-01
Numerical study on the effect of stent shape on suture forces in stent-grafts. 1:103852-1. 2020-01-01
On the bulk biomechanical behavior of densely cross-linked dentin matrix: The role of induced-glycation, regional dentin sites and chemical inhibitor. 103:103589. 2020-01-01
One-step ceramic primer as surface conditioner: Effect on the load-bearing capacity under fatigue of bonded lithium disilicate ceramic simplified restorations. 104:103686. 2020-01-01
Parametric analysis of the influence of texture on human dental surface hardness. 102:103495. 2020-01-01
Performance of MDP-based system in eroded and carious dentin associated with proteolytic inhibitors: 18-Month exploratory study. -:104177. 2020-01-01
Physical and biological characterizations of TiNbSn/(Mg) system produced by powder metallurgy for use as prostheses material. 000:104260-104269. 2020-01-01
Profile of a 10-MDP-based universal adhesive system associated with chlorhexidine: Dentin bond strength and in situ zymography performance  . 110:103925. 2020-01-01
Quantitative and qualitative analyses of ceramic chipping. 110:103928. 2020-01-01
Radiopacity and mechanical properties of dental adhesives with strontium hydroxyapatite nanofillers. 101:103447. 2020-01-01
Reliability and correlation between microshear and microtensile bond strength tests of composite repairs. 103:103607. 2020-01-01
Silica infiltration in partially stabilized zirconia: Effect of hydrothermal aging on mechanical properties. 109:103774-103780. 2020-01-01
Step-stress vs. staircase fatigue tests to evaluate the effect of intaglio adjustment on the fatigue behavior of simplified lithium disilicate glass-ceramic restorations. 00:104091. 2020-01-01
Strain induced localized corrosion of NiTi, NiTiCo and NiTiCr alloys in 0.9% NaCl. 112:104015. 2020-01-01
Structural, chemical and optical characterizations of an experimental SiO2-Y-TZP ceramic produced by the uniaxial/isostatic pressing technique. 106:103749-103355. 2020-01-01
The role of polymeric nanofibers on the mechanical behavior of polymethyl methacrylate resin. 112:104072. 2020-01-01
Thermo-mechanical characterization of NiTi orthodontic archwires with graded actuating forces. 107:103747. 2020-01-01
Three-body wear effect on different CAD/CAM ceramics staining durability. 103:103579-x. 2020-01-01
Ultra-high molecular weight polyethylene bioactive composites with carbonated hydroxyapatite. 110:103938. 2020-01-01
Viscoelastic finite element evaluation of transient and residual stresses in dental crowns: Design parametric study. 103:103545. 2020-01-01
Which materials would account for a better mechanical behavior for direct endocrown restorations?. 103:103592. 2020-01-01

tem uma área de assunto

publisher

Elsevier BV

is open access

False invalid format

is in DOAJ

False invalid format