INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (INTERNET)

Visão geral
Metrics
Identidade
Ver todos

Qualis

A2

código do país

GB

tipo

journal

publicação venue de

A benchmark of mechanical properties and operational parameters of different steel filler metals for wire arc additive manufacturing. 1:1-15. 2023-01-01
A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. 1:1-12. 2023-01-01
A literature review in heat source thermal modeling applied to welding and similar processes. 1:1-2957. 2023-01-01
A methodology for multipass gas metal arc welding of shipbuilding steel plates with different thicknesses. 5:1. 2023-01-01
Additive manufacturing of duplex stainless steels: assessment of deposition processes, microstructure, and properties. 127:4500. 2023-01-01
Advanced ceramic grinding process combined to hazard mitigation to the employees? health by using an alternative lubri-refrigeration technique. 1:1-10. 2023-01-01
An IoT system for managing machine tool spindles in operation. 1:1-19. 2023-01-01
Analyzing micro-geometric deviations of a helical gear profile as a function of material and machining parameters in the hobbing, shaving and carbonitriding processes. 1:1-1. 2023-01-01
Assessment of the surface integrity of AISI H13 tool steel after milling with carbide and cermet inserts. 1:1-14. 2023-01-01
Castability of Cu-Al-Mn shape memory alloy in a rapid investment casting process: computational and experimental analysis. 127:2563-2579. 2023-01-01
Combined effect of the interlayer temperature with travel speed on features of thin wall WAAM under two cooling approaches. 1:1-289. 2023-01-01
Comparative study of deep drilling in the Ti-6Al-4 V ELI titanium alloy using standard and high-feed rate. 1:1/1-14. 2023-01-01
Decision tree predictive model for dimensional control of side flange bearing housings. 1:1-13. 2023-01-01
Detection and characterization of metal transfer in GMAW using computational vision algorithms. online:1-11. 2023-01-01
Different cooling strategies applied during the process of aluminum alloy boring. 1:1-17. 2023-01-01
Drilling of carbon fiber parts performed by an Industry 4.0 systems-integrated technology. 1:1-8. 2023-01-01
Effect of increased mechanical strength on the machinability of graphite cast irons in face milling. 1:1-14. 2023-01-01
Effects of graphene oxide addition in properties of shielded metal arc weld joints. 127:5775-5789. 2023-01-01
Effects of heat and vibration treatments for welding on residual stresses and mechanical properties. 1:1. 2023-01-01
Enhanced abrasive‑mixed‑µ‑EDM performance towards improved surface characteristics of biodegradable Mg AZ31B alloy. 124:2685-2700. 2023-01-01
Evaluating the optimized lubri-cooling technique for various cutting conditions in through-feed centerless grinding process. 1:1-10. 2023-01-01
Force and vision-based system for robotic sealing monitoring. 1:1-13. 2023-01-01
Impact of cooled compressed air and high-speed cutting on the drilling of hybrid composite-metal stacks. 125:5445-5461. 2023-01-01
Impact of nozzle temperature on dimensional and mechanical characteristics of low-density PLA. 126:1629-1638. 2023-01-01
Improving the quality assessment of drilled holes in aircraft structures. 1:1-14. 2023-01-01
Influence of grinding wheel conditioning on the grindability of Ti-6Al-4V alloy. 1:1-12. 2023-01-01
Influence of post-weld heat treatment in buttered interface of AISI 4130 and Inconel alloy welded joints. 1:1-10. 2023-01-01
Influence of process parameters and post-molding condition on shrinkage and warpage of injection-molded plastic parts with complex geometry. 1. 2023-01-01
Influence of rotation speed on microstructure formation during friction surfacing of AISI 316L over mild steel using a conventional CNC machining center. 126:4915-4924. 2023-01-01
Influence of selective laser melting process parameters on the surface integrity of difficult-to-cut alloys: comprehensive review and future prospects. 127:1071-1102. 2023-01-01
Influence of the hydraulic press system on advanced high-strength steel formability. 126:4722-624. 2023-01-01
Microstructure evolution, hardness response, and corrosion resistance of Inconel 625 weld overlay obtained by the ESSC process after post-welding heat treatments. 1:1-13. 2023-01-01
Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors. 1:1. 2023-01-01
Numerical study of the minimum uncut chip thickness in micro-machining of Inconel 718 based on Johnson-Cook isothermal model. 1:1. 2023-01-01
On the potential of low-cost instrumentation for digitalization of legacy machine tools. 1:1-13. 2023-01-01
Process monitoring of the AISI D6 steel turning using artificial neural networks. 1:1-16. 2023-01-01
Simulation-based digital twins monitoring: an approach focused on models? accreditation. 1:1-2435. 2023-01-01
Statistical learning and optimization of the helical milling of the biocompatible titanium Ti-6Al-7Nb alloy. 1:1-1813. 2023-01-01
Surface modification of biodegradable Mg alloy by adapting µEDM capabilities with cryogenically-treated tool electrodes. 1:1. 2023-01-01
The improvement of diamond-like carbon coatings for tribological and tribo-corrosion applications in automobile engines: an updated review study. 1:1-2322. 2023-01-01
The influence of NbB inoculation on dendritic spacing and grain size of an aluminum 2017 alloy at different cooling rates. 125:5681-5696. 2023-01-01
Tribological assessment of the SiO2 coating deposited by sol-gel process toward cutting tools coating. 1:1-17. 2023-01-01
Tribological effects of micromilling of hardened AISI D2 steel on tool wear and top burr formation. 00:00-00. 2023-01-01
A bootstrap control chart for the availability index. 1:1-11. 2022-01-01
A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. 1:1. 2022-01-01
A hybrid DMAIC framework for integrating response surface methodology and multi-objective optimization methods. 1:1-26. 2022-01-01
A modular product design framework for the home appliance industry. 120:2311-2330. 2022-01-01
A new approach to reduce the carbon footprint in resistance spot welding by energy efficiency evaluation. 119:6503-6520. 2022-01-01
A novel framework for single-minute exchange of die (SMED) assisted by lean tools. 119:01-19. 2022-01-01
A variable bead width filling pattern to print porous media with material extrusion additive manufacturing. 1:1-12. 2022-01-01
Advanced sustainable construction materials from hazardous iron ore treatment waste, concrete debris and lime production waste.. 1:1-1791. 2022-01-01
Advances in the interrupted surface manufacturing by applying different lubri-refrigeration techniques in the grinding process. 121:5387-5399. 2022-01-01
An experimental evaluation of particle impact dampers applied on the tool for milling of hardened steel complex surface. 10:1-19. 2022-01-01
Analysis of the effect of part geometry and cutting parameters over tool vibration and surface integrity on hard turning. 1:1-13. 2022-01-01
Analysis of the influence of welding parameters on defects and welding characteristics of aluminum-magnesium alloy 5052-H34 in the FSW process. 121:6137-6151. 2022-01-01
Application of MQL with cooled air and wheel cleaning jet for greener grinding process. 1:1-10. 2022-01-01
Application of optimized lubri-cooling technique in through-feed centerless grinding process of bearing steel SAE 52100. 1:1-12. 2022-01-01
Automatic definition of tool life under heavy roughing five-axis milling process in production environment. 1:1-19. 2022-01-01
Barkhausen Noise monitoring of microstructure and surface residual stress in maraging steel manufactured by Powder Bed Fusion and aging. 119:1835-1852. 2022-01-01
Characterization of an austenitic stainless steel preform deposited by wire arc additive manufacturing. 1:1. 2022-01-01
Characterization of the effects of high-intensity negative current pulses on metal transfer and melting rate in the AC-GMAW process. 121:00-1746. 2022-01-01
Clamping force model application on the aircraft structural assembly. 1:1-19. 2022-01-01
Comparative Case-Study of Finite Mixture and T²-Hotelling Control Charts for Multiple Stream Monitoring. 123:3233-3242. 2022-01-01
Comparative study of six failure criteria via numerical simulation of stamped DP600 steel. 121:2427-2435. 2022-01-01
Comparing the performance of several tool coatings in turning of commercially pure titanium grade 4. 1:1-19. 2022-01-01
Correction to: Prediction of vibration responses in a reciprocating compressor interstage piping system using the modal expansion method. 119:4091-4091. 2022-01-01
Data envelopment analysis for algorithms efficiency assessment in metamodel-based simulation optimization. 1:1-15. 2022-01-01
Digital transformation: a review on artificial intelligence techniques in drilling and production applications. 1:1-5582. 2022-01-01
Dry machining of nodular cast iron using a YAG-reinforced alumina ceramic cutting tool. 123:1-110. 2022-01-01
Eco-friendly cementless concrete from hazardous iron ore tailing and waste of cellulose-pulp, concrete demolition, and lime production. 121:1-945. 2022-01-01
Eco-friendly thinking toward mitigating the greenhouse effect applied to the alumina grinding process. 121:2171-2183. 2022-01-01
Effect of laser cladding parameters in NbC reinforced 316L austenitic stainless steel composite depositions on a mild steel. 122:1-1. 2022-01-01
Effect of zinc coating on delay nugget formation in dissimilar DP600-AISI304 welded joints obtained by the resistance spot welding process. 120:1-11. 2022-01-01
Enhanced abrasive-mixed-µ-EDM performance towards improved surface characteristics of biodegradable Mg AZ31B alloy. --:--. 2022-01-01
Environmentally clean ceramics manufacture with the application of hazardous car production sludge and galvanic process glass waste. 1:1-3616. 2022-01-01
Evaluating the effect of MQL technique in grinding VP50IM steel with green carbide wheel. 1:1-10. 2022-01-01
Evaluation of an experimental modal analysis device for micromilling tools. 119:6679-6692. 2022-01-01
Evaluation of high penetration hybrid laser-GMAW welding process productivity applied in the joining of thick plates. 1:1-13. 2022-01-01
Evaluation of the use of vegetable oils in the grinding of AISI 4340 steel. 120:499-514. 2022-01-01
Evaluation of thermal and geometric properties of martensitic stainless steel thin walls built by additive manufacturing cold metal transfer (CMT) processes. 118:1-15. 2022-01-01
Evaluation of trade-off between cutting time and surface roughness robustness regarding tool wear in hard turning finishing. 123:1-3078. 2022-01-01
Failure analysis of AISI 430 stainless steel sheet under stretching and bending conditions. 120:1-14. 2022-01-01
Fracture behavior under compression loading of surface-cleaned metallic lattice structures. -:1-13. 2022-01-01
Green machining of aluminum pipes: an integrated approach for eco-efficiency and life cycle assessment in manufacturing systems. 121:1-17. 2022-01-01
Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. 1:1-10. 2022-01-01
Hazardous spent methanol synthesis catalyst waste and ground cooled ferrous slag application to produce sustainable ceramics. 1:1-39. 2022-01-01
Heat flux in machining processes: a review. 01:01-22. 2022-01-01
Heating rate effect during sintering on the technological properties of Brazilian red ceramics. 00:01-8135. 2022-01-01
How to find the variables causing outliers in a multivariate autocorrelated process control: a study in simulation and an extruder machine. 1:---. 2022-01-01
In-process chatter detection in micro-milling using acoustic emission via machine learning classifiers. 1:1-11. 2022-01-01
Induction bending effects on mechanical properties and corrosion resistance of duplex stainless steel UNS S31803 pipes. 1:1-12. 2022-01-01
Influence of drawbead geometry and blank holder force on the dual phase steel formability. 121:1-11. 2022-01-01
Influence of machining parameters and deep rolling on the fatigue life of AISI 4140 steel. 121:6153-6167. 2022-01-01
Influence of welding parameters and surface preparation on thin copper-copper sheets welded by ultrasonic welding process. 122:1-16. 2022-01-01
Integration of design structure matrix and modular function deployment for mass customization and product modularization: a case study on heavy vehicles. 1:1-16. 2022-01-01
Investigations on metallurgical parameters in hypoeutectic Al-Si alloys under upward directional solidifications. 121:1-24. 2022-01-01
Laser remelting of AlSi10Mg(‑Ni) alloy surfaces: influence of Ni content and cooling rate on the microstructure. 120:8117-8132. 2022-01-01
Manufacturing process linked to the MQL compared to flood lubrication applied to the grinding of VP50IM steel using black silicon carbide wheel. 1:1-10. 2022-01-01
Mapping ductile-to-fragile transition and the effect of tool nose radius in diamond turning of single-crystal silicon. 118:443-867. 2022-01-01
Market-driven modularity: an empirical application in the design of a family of autonomous mobile palletizers. 123:1377-1400. 2022-01-01
Metamodeling-based simulation optimization in manufacturing problems: a comparative study. 1:1-20. 2022-01-01
Micro-metal additive manufacturing - state-of-art and perspectives. 122:3547-3564. 2022-01-01
Microstructure, mechanical properties, and corrosion resistance of supermartensitic steel UNS S41426: comparison between forged and hot-rolled seamless pipe. 00:00-2653. 2022-01-01
Microstructure, mechanical properties, and pitting corrosion resistance of SAF 2205 duplex stainless steel after friction hydro-pillar processing. 1:1-8. 2022-01-01
Modularity in design and production relationships: a field study in two automakers. 123:1-1606. 2022-01-01
Numerical investigation of dissimilar friction stir welding of AISI 304L and 410S stainless steels. -:--2733. 2022-01-01
Numerical simulation and multiobjective optimization of fluid-structure interaction in aluminum extrusion. 01:101-566. 2022-01-01
On machine learning and visual analysis for quality prediction of film metallization process. 1:1-13. 2022-01-01
Prediction of vibration responses in a reciprocating compressor interstage piping system using the modal expansion method. 1:1-17. 2022-01-01
Readiness levels of Industry 4.0 technologies applied to aircraft manufacturing-a review, challenges and trends. 1:1-17. 2022-01-01
Riveting process simulation to predict induced deformations in aeronautical structures. 1:1-15. 2022-01-01
Sensitivity analysis and multi-objective optimization of tungsten inert gas (TIG) welding based on numerical simulation. 1:1-15. 2022-01-01
Shielding gas influence on AA5086 welded joints: residual stresses analysis, microstructural characterisation and mechanical properties.. 120:1-10. 2022-01-01
Statistical study of surface texture and chip formation during turning of AISI 1020 steel: Emphasis on parameters Rsk, Rku, and Rk family and on the chip thickness ratio. 121:27-8283. 2022-01-01
Stochastic model for setpoint of a rolling mill: an application in the soybean oil production. 121:1-14. 2022-01-01
Strengthening of additive manufactured parts by using different type of fibre reinforcements. 1:1-15. 2022-01-01
Stress state analysis of friction stir welding. 121:1123-1134. 2022-01-01
Study of the mathematical modelling of interface temperature in turning by equivalent thermal conductivity. 1:1-12. 2022-01-01
Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM). 1:1-3199. 2022-01-01
Study of wear behavior and tool life in different taps during the internal threading of a nodular iron engine crankshaft. 120:1-1. 2022-01-01
Study on surface integrity and ductile cutting of PV polycrystalline silicon and wear mechanisms of electroplated diamond wire. 121:1-15. 2022-01-01
Suppressing notch wear by changing the tool path in the side milling of a Ti-6Al-4 V alloy. 01:01-11. 2022-01-01
TIG spot welding applied to NiTi shape memory wires optimized by factorial design. 121:1-14. 2022-01-01
Tempering influence on residual stresses and mechanical properties of AISI 4340 steel. -:--1134. 2022-01-01
The dynamics of a 3D printed microrotor. 121:2803-2814. 2022-01-01
The state of the art of electrical discharge drilling: a review. 1:1-23. 2022-01-01
Thermal analysis of a proposed internally cooled machining tool system. 1:1-15. 2022-01-01
Toward the use of bond graphs for manufacturing control: comparison of existing models. 121:2841-2865. 2022-01-01
Weld bead geometry real-time control in gas metal arc welding processes using intelligent systems. 2022:1-14. 2022-01-01
ZrO2-CNT composite production through reducing atmosphere. 122:3323-3335. 2022-01-01
A methodology for industrial robot calibration based on measurement sub-regions. 119:1199-1216. 2021-01-01
A multiobjective optimization of the welding process in aluminum alloy (AA) 6063 T4 tubes used in corona rings through normal boundary intersection and multivariate techniques. 1:1-15. 2021-01-01
A new hybrid process combining machining and selective laser melting to manufacture an advanced concept of conformal cooling channels for plastic injection molds. 1:1-16. 2021-01-01
A new multiobjective optimization with elliptical constraints approach for nonlinear models implemented in a stainless steel cladding process. 1:10-1484. 2021-01-01
A new technique for identification and evaluation of wear in copper electrodes in electrical discharge machining using acoustic emission signals. 1:1-14. 2021-01-01
Advances in precision manufacturing towards eco-friendly grinding process by applying MQL with cold air compared with cooled wheel cleaning jet. 113:3329-3342. 2021-01-01
An Inverse Procedure to Estimate the Heat Flux at Coated Tool-chip Interface: a 3D Transient Thermal Model. 1:1-11. 2021-01-01
An efficient short-time Fourier transform algorithm for grinding wheel condition monitoring through acoustic emission. 1:1-19. 2021-01-01
An extended analysis on tuning the parameters of Adaptive Monte Carlo Localization ROS package in an automated guided vehicle. 1:1-1995. 2021-01-01
Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis. 117:691-705. 2021-01-01
Banding and microstructural features in laser cladding of a 304 substrate using 316 powder. 112:2327-2339. 2021-01-01
Barkhausen Noise monitoring of microstructure and surface residual stress in maraging steel manufactured by Powder Bed Fusion and aging. 1:1. 2021-01-01
Big data/analytics platform for Industry 4.0 implementation in advanced manufacturing context. 1:1-1973. 2021-01-01
Co-Cr-Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties. 116:2387-2399. 2021-01-01
Comparative LCA of automotive gear hobbing processes with flood lubrication and MQL. 1:1-1. 2021-01-01
Comparative assessment of lubri-cooling conditions when turning CP-Ti Grade 4 based on surface roughness. 113:365-378. 2021-01-01
Comparative evaluation of CBN wheels with abrasive grains of different friability applied to steel and ductile iron grinding process. 1:1-10. 2021-01-01
Comparison of EDM and laser trepanation micro-drilling processes using multiple-criteria decision analysis. -:--2612. 2021-01-01
Compression and energy absorption of maraging steel primitive scaffolds produced by powder bed fusion. 116:1271-1283. 2021-01-01
Concurrent improvement of surface roughness and residual stress of as-built and aged additively manufactured maraging steel post-processed by milling. 166:2309-2323. 2021-01-01
Decision-making in a fast fashion company in the Industry 4.0 era: a Digital Twin proposal to support operational planning. 1:1-14. 2021-01-01
Development of a cyclic liquid nitrogen injection system and its application to minimum quantity lubrication milling of the Ti-6Al-4V alloy. -:--24. 2021-01-01
Diagnostic and severity analysis of combined failures composed by imbalance and misalignment in rotating machines. 1:1-3092. 2021-01-01
Eco-friendly manufacturing towards the industry of the future with a focus on less cutting fluid and high workpiece quality applied to the grinding process. 113:1163-1172. 2021-01-01
Effect of angle, distance between electrodes and TIG current on the weld bead geometry in TIG-MIG/MAG welding process. 114:1505-1515. 2021-01-01
Effect of grinding with different CBN grains applied to austempered ductile iron linked to quality and industrial cost. 1:1-10. 2021-01-01
Effect of power modulation frequency on porosity formation in laser welding of SAE 1020 steels. 1:1-2517. 2021-01-01
Effect of the interpass temperature on simulated heat-affected zone of gas metal arc welded API 5L X70 pipe joint. 119:08261-274. 2021-01-01
Effectof cutting parameters and cutting edge preparation on milling of VP20TS steel. 116:2929-2942. 2021-01-01
Effects of plasma nitriding and nitrocarburizing thermochemical treatments and surface texture on surface damage evolution of hot stamping punches. 112:2341-2358. 2021-01-01
Effects of threaded pin profile on torque, power, and energy by modeling and experimental analysis. 114:2739-2751. 2021-01-01
Electric arc shape and weld bead geometry analysis under the electromagnetic constriction and expansion effect. -:--1701. 2021-01-01
Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation. 1:1-1447. 2021-01-01
Gestures-teleoperation of a heterogeneous multi-robot system. 1:1-2015. 2021-01-01
Green ceramic machining benefits through ultrasonic-assisted turning: an experimental investigation. 1:1-12. 2021-01-01
Grinding behavior of VP50IM steel using green and black silicon carbide compared to aluminum oxide wheel under different feed rates. 1:1-10. 2021-01-01
Grinding comparative analysis between different proportions of water-oil applied to MQL technique and industrial production cost towards a green manufacturing. 113:1281-1293. 2021-01-01
Heat treatment effects on the hardness and wear behavior of laser-welded AISI40 martensitic steel plates. 1:1-1163. 2021-01-01
Hinkley criterion applied to detection and location of burn in grinding process. 113:3177-3188. 2021-01-01
Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. 113:935-953. 2021-01-01
Improvement weldability of dissimilar joints (Ti6Al4V/Al6013) for aerospace industry by laser beam welding. 115:01-1070. 2021-01-01
In situ processing aluminide coatings with and without tungsten carbide. nov:1. 2021-01-01
Inducement of residual stresses in WC-5%Co cutting inserts by plunge-face grinding. 112:1-18. 2021-01-01
Industrial manufacturing linked to the mechanical and economic viewpoint of the mold steel grinding process using aluminum oxide wheel. 1:1-10. 2021-01-01
Influence of ball milling parameters on microstructure and magnetic properties of aluminum bronze chips reinforced with vanadium carbide. 115:2205-2218. 2021-01-01
Investigations on quality characteristics in gas tungsten arc welding process using artificial neural network integrated with genetic algorithm. 113:--15. 2021-01-01
Laser surface texturing and characterization of austenitic stainless steel for the improvement of its surface properties. 1:1-15. 2021-01-01
Laser-assisted manufacturing of 45S5 Bioglass-coated zirconia structured surfaces targeting medical implants: adhesive, wettability, mechanical, and bioactivity evaluation. x:x-x. 2021-01-01
Lean Six Sigma for the automotive industry through the tools and aspects within metrics: a literature review. 01:01-1383. 2021-01-01
Manufacturing and properties of composite material from demolition debris, plaster waste, and lime production waste to decrease ecological problems of cities. 114:1433-3015. 2021-01-01
Manufacturing processes? role over the residual stress state evolution of crankshafts. 112:2425-2433. 2021-01-01
Mechanical and electrical behavior of ABS polymer reinforced with graphene manufactured by the FDM process. 1:1-1033. 2021-01-01
Micro-machining of additively manufactured metals: a review. 1:1-20. 2021-01-01
Microstructure and impact toughness of high strength steel weld metals deposited by MCAW-RE process using different shielding gases. 1:1-16. 2021-01-01
Multi-objective optimization and finite element method combined with optimization via Monte Carlo simulation in a stamping process under uncertainty. 1:1-20. 2021-01-01
Multi-objective robust evolutionary optimization of the boring process of AISI 4130 steel. 1:1-1765. 2021-01-01
New milling methodology for sealing planes in AlSi9Cu3(Fe) alloy machined with PCD tool. 113:01/ e-12422-14. 2021-01-01
Novel performance assessment of interrupted grinding process using aluminum oxide wheel with resinoid bond. 1:1-10. 2021-01-01
Numerical-experimental analysis of a modified G-BOP test to evaluate cracks in weld beads in thin sheets. 116:1-10. 2021-01-01
Optimization of machining parameters using response surface methodology with desirability function in turning duplex stainless steel UNS S32760. 117:1633-1644. 2021-01-01
Performance evaluation of the edge preparation of tungsten carbide inserts applied to hard turning. 112:1-13. 2021-01-01
Prediction of geometrical characteristics and process parameter optimization of laser deposition AISI 316 steel using fuzzy inference. 1:1-12. 2021-01-01
Residual stress and surface microhardness post-milling in 2205 duplex steel. 113:01/ e-12422-14. 2021-01-01
Screw-assisted 3D printing with granulated materials: a systematic review. -:---. 2021-01-01
Sensors applied to automated guided vehicle position control: a systematic literature review. 1:1-14. 2021-01-01
Simulating convective-radiative heat sink effect by means of FEA-based Gaussian heat sources and its approximate analytical solutions for semi-infinite body. 117:3717-3742. 2021-01-01
Structural characterization of iron oxide grown on 18% Ni-Co-Mo-Ti ferrous base alloy aged under superheated steam atmosphere. 1:1-11. 2021-01-01
Superficial residual stress, microstructure, and efficiency in similar joints of AA2024-T3 and AA7475-T761 aluminum alloys formed by friction stir welding. 1:1-20. 2021-01-01
Surface integrity of machined AISI D2 steel and its effect on the adhesion of a PVD-AlCrN coating. 112:2705-2715. 2021-01-01
The enhanced normalized normal constraint approach to multi-objective robust optimization in helical milling process of AISI H13 hardened with crossed array. 119:1-22. 2021-01-01
The influences of the variable speed and internal die geometry on the performance of two commercial soluble oils in the drawing process of pure copper fine wire. 32:130. 2021-01-01
The study of volumetric wearing of PCBN/W-Re composite tool during friction stir processing of pipeline steels (X70) plates. -:--1564. 2021-01-01
Thermal influence analysis of coatings and contact resistance in turning cutting tool using COMSOL. 118:1-15. 2021-01-01
Transferability of the working envelope approach for parameter selection and optimization in thin wall WAAM. -:-. 2021-01-01
Translating value stream maps into system dynamics models: a practical framework. -:---. 2021-01-01
Tribological analysis and performance of a DLC coating on tungsten carbide micro-tools to use at tantalum precision machining. 116:719-732. 2021-01-01
WED-machining performance by reciprocating molybdenum wire on Inconel 718 with water or hydrocarbon dielectrics. 1:1-14. 2021-01-01
Wear resistance of a Metco 1030A hard coating deposited on Hadfield steel by laser cladding for ore comminution application. 1:1-12. 2021-01-01
X-ray microtomography for conventional grinding wheel structure analysis. 113:2943-2950. 2021-01-01
A comparative experimental study of additive manufacturing feasibility faced to injection molding process for polymeric parts. 109:2663-2677. 2020-01-01
A comparison between LBW and hybrid laser-GMAW processes based on microstructure and weld geometry for hardenable steels. 1:1-14. 2020-01-01
A comparison of different heat flux density distribution models to predict the temperature in the drilling process. 109:1997-2008. 2020-01-01
A machinability evaluation based on the thermal and mechanical properties of two engine valve steels. 110:3209-3219. 2020-01-01
A new metric for assessing the surface roughness of agate plates cut by abrasive water jet. 1:1-4912. 2020-01-01
A novel jigless process applied to a robotic cell for aircraft structural assembly. 1:1-15. 2020-01-01
A preliminary study on the double cold wire gas metal arc welding process. 106:5393-5405. 2020-01-01
An approach to torque and temperature thread by thread on tapping. 1:1-11. 2020-01-01
An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations. 1:1-14. 2020-01-01
Analyses of two manufacturing systems in drilling of CGI: drilling and reaming × drilling. 1:1-14. 2020-01-01
Analysis of the initial damage region in agate plates cut by abrasive waterjet (AWJ) process. 1:1-2638. 2020-01-01
Analysis of the surface roughness obtained by the abrasive flow machining process using an abrasive paste with oiticica oil. 106:5061-5070. 2020-01-01
Analytical, numerical, and experimental investigation of the influence of lubrication on the drawing behavior of copper alloy. 107:1773-1784. 2020-01-01
Application of MQL technique using TiO2 nanoparticles compared to MQL simultaneous to the grinding wheel cleaning jet. 106:2205-2218. 2020-01-01
Applications of texturization techniques on cutting tools surfaces-a survey. 109:1117-1135. 2020-01-01
Automatic grinding burn recognition based on time-frequency analysis and convolutional neural networks. 110:1833-1849. 2020-01-01
Automatic monitoring of steel strip positioning error based on semantic segmentation. 110:2847-2860. 2020-01-01
Behavior of austempered ductile iron (ADI) grinding using different MQL dilutions and CBN wheels with low and high friability. 107:4373-4387. 2020-01-01
CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling. 1:1-1900. 2020-01-01
Comparative analysis between resinoid and vitrified bond grinding wheel under interrupted cutting. 109:75-85. 2020-01-01
Concept and validation of an active cooling technique to mitigate heat accumulation in WAAM. 107:1-2523. 2020-01-01
Construction of small sets of reference images for feature descriptors fitting and their use in the multiclassification of parts in industry. 108:1433. 2020-01-01
Depth of dressing optimization in CBN wheels of different friabilities using acoustic emission (AE) technique. 1:1-10. 2020-01-01
Design and experimental evaluation of an impact damper to be used in a slender end mill tool in the machining of hardened steel. 106:2553-2567. 2020-01-01
Design and experimental set-up of a hybrid dynamometer applied to a fourth axis of the vertical machining center. 1:1-2168. 2020-01-01
Development and characterization of an iron aluminide coating on mild steel substrate obtained by friction surfacing and heat treatment. 111:2569-2576. 2020-01-01
Development of a mobile application for monitoring and controlling a CNC machine using Industry 4.0 concepts. -:1-15. 2020-01-01
Effects of cobalt and solidification cooling rate on intermetallic phases and tensile properties of a -Cu, -Zn, -Fe containing Al-Si alloy. 107:717-730. 2020-01-01
Effects of cutting parameters on roughness and residual stress of maraging steel specimens produced by additive manufacturing. 1:100-109. 2020-01-01
Effects of different tool material grades and lubri-cooling techniques in milling of high-Cr white cast iron. 110:875-886. 2020-01-01
Effects of processing parameters on the micro-drilling through fast hole electroerosion and laser trepanning in Inconel 718. 106:31-45. 2020-01-01
Effects of the exposition of an autoclave prepreg to the processing environment on its properties, curing cycle and final composite behavior. 106:1-5136. 2020-01-01
Electromechanical impedance (EMI) measurements to infer features from the grinding process. 106:2035-2048. 2020-01-01
Evaluation of a cooled wheel cleaning jet in minimum quantity lubrication grinding process. 111:1303-1317. 2020-01-01
Evaluation of machined surface of the hardened AISI 4340 steel through roughness and residual stress parameters in turning and grinding. 107:791-803. 2020-01-01
Evaluation of wear mechanisms of PVD and CVD coatings deposited on cemented carbide substrates applied to hard turning. 1:1-13. 2020-01-01
Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials. 1:1-15. 2020-01-01
Experimental study of micromilling operation of stainless steel. 1:1-10. 2020-01-01
Experimental study of the influence of graphene platelets on the performance of grinding of SAE 52100 steel. 110:1-12. 2020-01-01
Galvanic Cr-Zn and spent foundry sand waste application as valuable components of sustainable ceramics to prevent environment pollution. 01-12:01-12-12. 2020-01-01
Grinding assessment of workpieces with different interrupted geometries using aluminum oxide wheel with vitrified bond. 108:931-941. 2020-01-01
Grinding behavior of austempered ductile iron: a study about the effect of pure and diluted MQL technique applying different friability wheels. 108:3661-3673. 2020-01-01
Grinding comparative between ductile iron and austempered ductile iron under CBN wheel combined to abrasive grains with high and low friability. 1:1-10. 2020-01-01
Grinding hardened steel using MQL associated with cleaning system and cBN wheel. 107:2065-2080. 2020-01-01
Grinding performance by applying MQL technique: an approach of the wheel cleaning jet compared with wheel cleaning Teflon and Alumina block. 107:4415-4426. 2020-01-01
Grinding performance of hardened steel: a study about the application of different cutting fluids with corrosion inhibitor. 108:2741-2754. 2020-01-01
Grinding process applied to workpieces with different geometries interrupted using CBN wheel. 1:1-1275. 2020-01-01
Hybrid manufacturing: A review of the synergy between directed energy deposition and subtractive processes. 1:1-3390. 2020-01-01
Incremental stamping forming with use of roller ball tool in aluminum and magnesium alloy. 1:0/1-462. 2020-01-01
Influence of carbon content on the martensitic transformation of titanium stabilized austenitic stainless steels. 107:1-356. 2020-01-01
Influence of energy density on selective laser sintering of carbon fiber-reinforced PA12. 111:2361-2376. 2020-01-01
Influence of rotation frequency and rotation diameter on mechanical properties and microstructure of weld metal produced by MCAW-RE. 1:1-16. 2020-01-01
Influence of sintering condition on the tool wear of NbC-based Ni binder-cemented carbide cutting tools. 106:3575-3585. 2020-01-01
Influence of surface quality on residual stress of API 5L X80 steel submitted to static load and its prediction by artificial neural networks. 1:1-11. 2020-01-01
Influence of welding interpass temperature on Charpy V-notch impact energy of coarse-grain heat-affected zone of AISI 4130 steel pipe. 108:1-17. 2020-01-01
Investigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061. 106:3523-3531. 2020-01-01
Investigation of load direction on the compressive strength of additively manufactured triply periodic minimal surface scaffolds. -:1-779. 2020-01-01
Investigation of micromilled tool steel H13 using tungsten carbide micro-end mills. 107:1179-1189. 2020-01-01
Investigation of nitride layers deposited on annealed AISI H13 steel by die-sinking electrical discharge machining. 109:1111-1121. 2020-01-01
Investigation of transverse shrinkage and angular distortion caused by hybrid laser-arc welding. 107:1-4711. 2020-01-01
Investigation on PCD cutting edge geometry for Ti6Al4V high feed milling. 1:1. 2020-01-01
Lightweight hybrid CFRP design for machine tools with focus on simple manufacturing. 108:3915-3924. 2020-01-01
Machine vision system for quality inspection of beans. 1:1-28. 2020-01-01
Materiais sustentáveis de resíduos perigosos da flotação de minério de chumbo em compostos com areia de fundição e argila usadas. 109:5-6. 2020-01-01
Mechanical and thermal effects of abrasive cut-off applied in low and medium carbon steels using aluminum oxide cutting disc. 1:1-10. 2020-01-01
Microhardness and residual stress of dissimilar and thick aluminum plates AA7181-T7651 and AA7475-T7351 using bobbin, top, bottom, and double-sided FSW methods. 1:1-20. 2020-01-01
Microstructure and mechanical properties of 9% nickel steel welded by FSW. 111:1-16. 2020-01-01
New knowledge about grinding using MQL simultaneous to cooled air and MQL combined to wheel cleaning jet technique. 109:905-917. 2020-01-01
Numerical study on variation of chord modulus on the springback of high-strength steels. 1:1-4713. 2020-01-01
Optimization of Kanban systems using robust parameter design: a case of study. 106:1365-1374. 2020-01-01
Optimization of resistance spot welding process parameters of dissimilar DP600/AISI304 joints using the infrared thermal image processing. 108:1-221. 2020-01-01
PCD coating polishing effect on the tool wear in high-speed milling of graphite. online:1-15. 2020-01-01
Performance of austempered ductile iron (ADI) grinding using diluted oil in MQL combined with wheel cleaning jet and different CBN grains friability. 107:1805-1818. 2020-01-01
Planning and construction of mechanism for surface wear testing and fault analysis in quadril joint prosthetic tribosystem. 106:4193-4202. 2020-01-01
Relationship between mechanical and metallurgical properties with machinability when drilling high-strength cast irons. 1:1-19. 2020-01-01
Research on the wear mechanisms during the high-speed tapping in 316L stainless steel. 112:419-436. 2020-01-01
Selective laser sintering of carbon fiber-reinforced PA12: Gaussian process modeling and stochastic optimization of process variables. 110:2049-2066. 2020-01-01
Simple machine learning allied with data-driven methods for monitoring tool wear in machining processes. 1:1-11. 2020-01-01
Simulation-assisted approach for determining wear-limited tool life in the coining process. xx:online. 2020-01-01
State of the art on internal thread manufacturing: a review. 110:3445-3465. 2020-01-01
Study of the applicability of 22MnB5 sheet metal as protective masks to improve tool life in hot forging process. 107:39-47. 2020-01-01
Surface analysis of WC-5%Co cemented tungsten carbide cutting insert after plunge-face grinding. 108:1-330. 2020-01-01
Sustainable material manufacturing from hazardous bauxite red mud in composites with clay slate waste and lime production waste. 1:1-1385. 2020-01-01
Sustainable materials from hazardous lead ore flotation waste in composites with spent foundry sand and clay. 01:01-1344. 2020-01-01
Technical feasibility of hard coating by flux-cored arc welding on a sugarcane cutting knife. 1-2:1-1013. 2020-01-01
The effect of pulsed cold-wire feeding on the performance of spray GMAW. 107:3485-3498. 2020-01-01
The potential of wire feed pulsation to influence factors that govern weld penetration in GMA welding. 110:2685-2701. 2020-01-01
Universal parameter language for the programming of numerical controlled machines. 110:2713-2725. 2020-01-01
Weldability and mechanical behavior of laser-welded TRIP 750 steel sheets. 1:1-2815. 2020-01-01

tem uma área de assunto

publisher

Springer Science+Business Media

is open access

False invalid format

is in DOAJ

False invalid format