Journal
Jornal
RDF description of ANALYTICA CHIMICA ACTA (ONLINE) - https://brcris.ibict.br/individual/journ_b9716218-d75c-4d02-95af-3e1051684f49
Toxic and Potentially Toxic Elements Determination in Cosmetics Used for Make-up: A Critical Review
Using 3D printed magnetic platform as support for screen printed electrode applied for p-toluenediamine detection in biological fluid and water samples
Ultrasensitive microfluidic electrochemical immunosensor based on electrodeposited nanoporous gold for SOX-2 determination
Metabology: Analysis of metabolomics data using community ecology tools
3D-printed electrode as a new platform for electrochemical immunosensors for virus detection
Ready-to-use 3D-printed electrochemical cell for in situ voltammetry of immobilized microparticles and Raman spectroscopy
Aerosol dilution as a new sample introduction strategy for microwave-induced plasma optical emission spectrometry
Innovative extraction materials for fiber-in-tube solid phase microextraction: A review
Production of 3D-printed disposable electrochemical sensors for glucose detection using a conductive filament modified with nickel microparticles
Pyrolyzed Cotton Balls for Protein Removal: Analysis of Pharmaceuticals in Serum by Capillary Electrophoresis
Influence of filament aging and conductive additive in 3D printed sensors
Photo-generation of mercury cold vapor mediated by graphene quantum dots/TiO2 nanocomposite: On line time-resolved speciation at ultra-trace levels
DNA Purification Using a Novel γ-Fe2O3/PEDOT Hybrid Nanocomposite
Paper-based optoelectronic nose for identification of indoor air pollution caused by 3D printing thermoplastic filaments
Data reduction by randomization subsampling for the study of large hyperspectral datasets
μOPTO: A microfluidic paper-based optoelectronic tongue as presumptive tests for the discrimination of alkaloid drugs for forensic purposes
Simultaneous determination of lead and antimony in gunshot residue using a 3D-printed platform working as sampler and sensor
Novel approach based on GQD-PHB as anchoring platform for the development of SARS-CoV-2 electrochemical immunosensor
A tutorial on multi-way data processing of excitation-emission fluorescence matrices acquired from semiconductor quantum dots sensing platforms
Use of carminic acid immobilized in agarose gel as a binding phase for DGT: A new approach for determinations of rare earth elements
Comprehensive analysis of phenolic compounds from natural products: Integrating sample preparation and analysis
Development and validation of voltammetric method for determination of amoxicillin in river water
A dispersive liquid-liquid microextraction based on deep eutectic solvent for elemental impurities determination in oral and parenteral drugs by inductively coupled plasma optical emission spectrometry
The multiple facets of flow analysis. A tutorial
Emerging Applications of Paper-Based Analytical Devices for Drug Analysis: A Review
Amperometric microsensor based on nanoporous gold for ascorbic acid detection in highly acidic biological extracts
Digital microfluidic platform assembled into a home-made studio for sample preparation and colorimetric sensing of S-nitrosocysteine
Sensing of L-methionine in biological samples through fully 3D-printed electrodes
Application of an in-house packed octadecylsilica-functionalized graphene oxide column for capillary liquid chromatography analysis of hormones in urine samples
Detection of adulteration in Eragrostis tef (Zucc.) Trotter flour using EDXRF and ComDim-MLR data fusion
Polyphenol oxidase-based electrochemical biosensors: A review
Label-free aptasensor for p24-HIV protein detection based on graphene quantum dots as an electrochemical signal amplifier
Improving selective channel occlusion of complex hydrocarbons and fatty acid methyl esters in urea crystals by using an expendable 3D-printed microfluidic device for sample preparation in untargeted petroleomics
A Review on Recent Advances in the Applications of Surface-Enhanced Raman Scattering in Analytical Chemistry
Electrochemical methods for the determination of antibiotic residues in milk: a critical review
Disposable pipette extraction: A critical review of concepts, applications, and directions
Successful combination of benchtop nuclear magnetic resonance spectroscopy and chemometric tools: A review
A 3D-printed robotic system for fully automated multiparameter analysis of drinkable water samples
Detection of Plasmodium falciparum malaria in 1 h using a simplified enzyme-linked immunosorbent assay
Silver-modified nitrogen-doped graphene quantum dots as a sensor for formaldehyde in milk using headspace micro-extraction on a single-drop of aqueous nanoparticles dispersion
Combinatorial projection pursuit analysis for exploring multivariate chemical data
Three-way calibration using PARAFAC and MCR-ALS with previous synchronization of second-order chromatographic data through a new functional alignment of pure vectors for the quantification in the presence of retention time shifts in peak position and shape
Thermoplastic electrodes as a new electrochemical platform coupled to microfluidic devices for tryptamine determination
A novel miniaturized electroanalytical device integrated with gas extraction for the voltammetric determination of sulfite in beverages
Corrigendum to -Opportunities for green microextractions in comprehensive two-dimensional gas chromatography / mass spectrometry-based metabolomics - A review- [Analytica Chimica Acta 1040 2018 1-18]
Sensing the Quantized Reactivity of Graphene
Miniaturized liquid chromatography focusing on analytical columns and mass spectrometry: A review
Sensing performances of spinel ferrites MFe2O4 (M = Mg, Ni, Co, Mn, Cu and Zn) based electrochemical sensors: A review
New conductive filament ready-to-use for 3D-printing electrochemical (bio)sensors: Towards the detection of SARS-CoV-2
An improved successive projections algorithm version to variable selection in multiple linear regression
Immobilized acetylcholinesterase in magnetic nanoparticles for in-line inhibition studies using a capillary electrophoresis system
A novel proposal to investigate the interplay between the spatial and spectral domains in near-infrared spectral imaging data by means of Image Decomposition, Encoding and Localization (IDEL)
A critical examination of the DPPH method: Mistakes and inconsistencies in stoichiometry and IC50 determination by UV-Vis spectroscopy
Multi-internal standard calibration applied to inductively coupled plasma optical emission spectrometry
Electrochemical microfluidic immunosensor based on TES-AuNPs@Fe3O4 and CMK-8 for IgG anti-Toxocara canis determination
Novel miniaturized passive sampling devices based on liquid phase microextraction equipped with cellulose-grafted membranes for the environmental monitoring of phthalic acid esters in natural waters
Non-enzymatic lactose molecularly imprinted sensor based on disposable graphite paper electrode
Fabrication of microwell plates and microfluidic devices in polyester films using a cutting printer
Novel approaches for colorimetric measurements in analytical chemistry - A review
Cold finger with semi closed reflux system for sample preparation aiming at Al, Ca, Cr, Cu, Fe, K, Mg, Mn, Ni, V and Zn determination in Drinking Water Treatment Sludge by MIP OES
Determination of Cl and S in crude oil by ICP-OES after sample digestion by microwave-induced combustion in disposable vessels
Unveiling the contribution of the reproductive system of individual Caenorhabditis elegans on oxygen consumption by single-point scanning electrochemical microscopy measurements
Direct magnetic sorbent sampling flame atomic absorption spectrometry (DMSS-FAAS) for highly sensitive determination of trace metals
Indirect calibration for capillary electrophoresis with conductivity detection
A video processing and machine vision-based automatic analyzer to determine sequentially total suspended and settleable solids in wastewater
High throughput and low bias DNA methylation and hydroxymethylation analysis by direct injection mass spectrometry
Supramolecular microextraction combined with paper spray ionization mass spectrometry for sensitive determination of tricyclic antidepressants in urine
A modular, reversible sealing, and reusable microfluidic device for drug screening
Crosslinked zwitterionic polymeric ionic liquid-functionalized nitinol wires for fiber-in-tube solid-phase microextraction and UHPLC-MS/MS as an amyloid beta peptide binding protein assay in biological fluids
SWiVIA - Sliding window variographic image analysis for real-time assessment of heterogeneity indices in blending processes monitored with hyperspectral imaging
Magnetic restricted-access carbon nanotubes for dispersive solid phase extraction of organophosphates pesticides from bovine milk samples
3D printed microfluidic mixer for real-time monitoring of organic reactions by direct infusion mass spectrometry
Molecular test for COVID-19 diagnosis based on a colorimetric genomagnetic assay
A versatile 3D printed multi-electrode cell for determination of three COVID-19 biomarkers
Reagent-less and sub-minute quantification of sulfite in food samples using substrate-integrated hollow waveguide gas sensors coupled to deep-UV LED
3D printing pen versus desktop 3D printers: Fabrication of carbon black/polylactic acid electrodes for single-drop detection of 2,4,6-trinitrotoluene
Three-dimensional voltammetry: use of chronoamperometric E-t-i data to achieve second-order advantage
Dual-emission CdTe/AgInS2 photoluminescence probe coupled to neural network data processing for the simultaneous determination of folic acid and iron (II)
Application of an integrative system (2D PLE×HPLC-PDA) for bioactive compound extraction and online quantification: Advantages, validation, and considerations
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Multiblock modelling on the study of the kinetic degradation of rosuvastatin calcium in the presence of retention time shifts and rank deficiency
Towards the determination of an equivalent standard column setbetween cryogenic and flow-modulated comprehensive two-dimensional gas chromatography
Development of highly sensitive electrochemical sensor using new graphite/acrylonitrile butadiene styrene conductive composite and 3D printing-based alternative fabrication protocol
Mass spectrometry applied to diagnosis, prognosis, and therapeutic targets identification for the novel coronavirus SARS-CoV-2: A review
Microwave-induced self-ignition: An efficient approach for high purity graphite digestion and multitechnique halogen determination
Multi sensor compatible 3D-printed electrochemical cell for voltammetric drug screening
In-tube solid-phase microextraction with a dummy molecularly imprinted monolithic capillary coupled to ultra-performance liquid chromatography-tandem mass spectrometry to determine cannabinoids in plasma samples
A video processing and machine vision-based automatic analyzer to determine sequentially total suspended and settleable solids in wasterwater
Surface molecularly imprinted core-shell nanoparticles and reflectance spectroscopy for direct determination of tartrazine in soft drinks
Magnetic restricted-access carbon nanotubes for SPME to determine cannabinoids in plasma samples by UHPLC-MS/MS
Sandwich-like electrochemical aptasensing of heat shock protein 70 kDa (HSP70): Application in diagnosis/prognosis of coronavirus disease 2019 (COVID-19)
Reverse transcription lesion-induced DNA amplification: An instrument-free isothermal method to detect RNA
Magnetic restrictedd acess carbon nanotubes for dispersive solid phase extraction of organophosphates pesticides from bovine milk samples
Flow-cytometry detection of fluorescent magnetic nanoparticle clusters increases sensitivity of dengue immunoassay
Biosensing strategies for the electrochemical detection of viruses and viral diseases - A review
A color reaction for the determination of Cu2+ in distilled beverages employing digital imaging