Journal
Jornal
RDF description of Applied Thermal Engineering - https://brcris.ibict.br/individual/journ_dccf979f-e67c-46e4-82c5-9ccd4a80704c
Geometric and operational analysis of a heat recuperator operating with s-CO2 near the pseudocritical region
Understanding the effects of variable permeability along the cross-section of packed beds of encapsulated phase change materials for Latent Heat Thermal Energy Storage systems
Maximizing the thermal performance index applying evolutionary multi-objective optimization approaches for double pipe heat exchanger
Numerical investigation for steam tubes temperature reduction in a four fuels tangentially fired boiler
Experiments for combustion temperature measurements in a sugarcane bagasse large-scale boiler furnace
Performance analysis of a hybrid compression-assisted absorption system using heat recovery ammonia generator
Pseudopotential Lattice Boltzmann Method for boiling heat transfer: A mesh refinement procedure
Mass Flow Prediction In A Refrigeration Machine Using Artificial Neural Networks
Maximizing volumetric efficiency using stochastic optimization techniques for internal combustion engines
Thermodynamic optimization of a linear thermomagnetic motor
Novel air dehydration for life-support systems of manned-spacecraft: Supersonic separator technology
Theoretical models for compact printed circuit heat exchangers with straight semicircular channels
Determining spatially-resolved thermal radiation from non-intrusive measurements of soot properties
High performance blended nanofluid based on gold nanorods chain for harvesting solar radiation
DESIGN AND EXPERIMENTAL EVALUATION OF A LINEAR THERMOMAGNETIC MOTOR USING GADOLINIUM: PRELIMINARY RESULTS
Thermodynamic performance analysis of a single-effect absorption refrigeration system operating with water and 1-ethyl-3-methylimidazolium-based ionic liquids mixtures
Editorial: Special Issue on the 10th International Conference on Multiphase Flow - ICMF2019
Effect of porous material properties on thermal efficiencies of a thermocline storage tank
Interrelationship between flow profiles and the magnetic waveform and their influence on the performance of first-order active magnetic regenerators
Limit solutions for a lumped parameter model of heat transfer in a diluted and indirectly heated co-current/counter-current moving bed heat exchanger with heat loss to surroundings
Simulation of a CubeSat with internal heat transfer using Finite Volume Method
Energetic analysis of reheating furnaces in the combustion of Coke Oven Gas, Linz-Donawitz Gas and Blast Furnace Gas in the steel industry
Algebraic solution and experimental validation for adiabatic coiled capillary tubes operating in transcritical CO2 cycle
Heat transfer investigation of a 90° zigzag channel diffusion-bonded heat exchanger
A review on the recent developments in thermal management systems for hybrid-electric aircraft
Numerical analysis of inorganic fouling with multi-physics turbulent models
Design trade-offs for an active magnetic regenerator device
Graph-based network modeling and simulation of condensers in once-through cooling water system under the effect of biofouling formation
The effects of discrete conductive blocks on the natural convection in side-heated open cavities
Photovoltaic modules applied to an energy self-sustainable automotive air coditioning system
A novel cooling geometry for subsea variable speed drives
Multi-objective optimization for a small biomass cooling and power cogeneration system using binary mixtures
Novel high-flux indoor solar simulator for high temperature thermal processes
Off-design model of an ORC system for waste heat recovery of an internal combustion engine
CFD simulation of conjugated heat transfer with full boiling in OpenFOAM(R)
Performance comparison of tube and plate-fin circular and elliptic heat exchangers for HVAC-R systems
Geometric optimization of a solar tower receiver operating with supercritical CO2 as working fluid
Heat transfer performance of an automotive radiator with MWCNT nanofluid cooling in a high operating temperature range
Experimental study of alternative receiver tube for parabolic trough system for typical summer and winter months in a tropical region
Heat transfer investigation of a 90◦ zigzag channel diffusion-bonded heat exchanger
Simulation of gasketed-plate heat exchangers using a generalized model with variable physical properties
Novel flat plate pulsating heat pipe with ultra sharp grooves
Flow boiling of hydrocarbons and their zeotropic binary mixtures under pre- and post-dryout conditions
Flow boiling of R1336mzz(Z) in tapered microgaps with asymmetric dual-V microchannels
Flow boiling pressure drop of R-1270 in 1.0 mm tube
Numerical assessment of transition metal nitrides nanofluids for improved performance of direct absorption solar collectors
Thermal efficiency of open-cell metal foams: Impact of foam thickness by comparing correlations and numerical modeling
Using a linear inverse heat conduction model to estimate the boundary heat flux with a material undergoing phase transformation
On flow boiling of R-1270 in a small horizontal tube: Flow patterns and heat transfer
On the application of the double integral method with quadratic temperature profile for spherical solidification of lead and tin metals
Modeling of confined bubble growth and heat transfer characteristics in parallel microchannel heat sinks
Recent advances on the thermal properties and applications of nanofluids: From nanomedicine to renewable energies
Guest Editorial: Special issue on the 8th Heat Powered Cycles Conference 2018
A lumped-element magnetic refrigerator model
Is it worth generating energy with garbage? defining a carbon tax to encourage waste-to-energy cycles
Novel thermosyphon-assisted setup for determining heat exchanger thermal characteristics
Comparison of Kalina cycles for heat recovery application in cement industry
Analysis of the membrane effects on the energy efficiency of water desalination in a direct contact membrane distillation (DCMD) system with heat recovery
Flow boiling and convective condensation of hydrocarbons: A state-of-the-art literature review
Optimization of a heat pipe-radiator assembly coupled to a recuperated closed Brayton cycle for compact space power plants
Effects of wildland fuel moisture content on radiant heat flux emitted by a laminar non-premixed flame
Predicting the thermal hysteresis behavior for a single-layer MnFeP1-xSix active magnetic regenerator
Performance ratings of concentric and lateral (taped, brazed and extruded) capillary tube suction line heat exchangers running with isobutane
Thermal storage integrated into air-source heat pumps to leverage building electrification: A systematic literature review
Magnetocaloric properties of spheroidal La(Fe,Mn,Si)13H y granules and their performance in epoxy-bonded active magnetic regenerators
In-field performance of continuous flight auger (CFA) energy piles with different configurations
Performance mapping of packed-bed thermal energy storage systems for concentrating solar-powered plants using supercritical carbon dioxide
Heat transfer performance enhancement in compact heat exchangers by the use of turbulators in the inner side
Design and off-design performance improvement of a radial-inflow turbine for ORC applications using metamodels and genetic algorithm optimization
Energy, exergy and exergoenvironmental analyses on gas-diesel fuel marine engine used for trigeneration system
Heat transfer and Power Consumption of Newtonian and non-Newtonian liquids in Stirred tanks with vertical tube baffles
Short nozzles design for real gas supersonic flow using the method of characteristics
Experimental study of dispersed flow film boiling at sub-channel scale in LOCA conditions: Influence of the steam flow rate and residual power
Transient thermal analysis of multilayer pipeline with phase change material
Discharge effectiveness of thermal energy storage systems
Detailed transient assessment of a small-scale concentrated solar power plant based on the organic Rankine cycle
Numerical and experimental study of the transient behavior of a domestic vapor compression refrigeration system - influence of refrigerant charge and ambient temperature
Thermal analysis and development of PID control for electronic expansion device of vapor compression refrigeration systems
A comprehensive attitude formulation with spin for numerical model of irradiance for CubeSats and Picosats
Thermal and hydrodynamic analysis of a compact heat exchanger produced by additive manufacturing
A comparison of parallel and colliding jet arrays in a compact vapour compression heat sink for electronics cooling
Heat transfer interactions between skin-type condensers and evaporators and their effect on the energy consumption of dual-skin chest-freezers
An experimental study of performance, combustion and emissions characteristics of an ethanol HCCI engine using water injection
Multi-parameter classification and quantification of R-134a condensation using machine learning
Theoretical and experimental studies on two-phase thermosyphon shell and shell heat exchangers
An experimental analysis over phase separators applied to household refrigerators
System-level multi-objective optimization of a magnetic air conditioner through coupling of artificial neural networks and genetic algorithms
Development of a method for predicting the transient behavior of an absorption chiller using artificial intelligence methods
An experimental study on flow boiling heat transfer of HFO1336mzz(Z) in microchannels-based polymeric heat sinks
Optimization of liquid jet ejector geometry and its impact on flow fields
Preliminary design, optimization and CFD analysis of an organic rankine cycle radial turbine rotor
Modeling of heat and mass transfer in a non-conventional rotary dryer
Ambient virtual sensor based defrost control for single compartment refrigerators
Thermodynamic analysis of concentrated solar energy layouts integrated with combined power system
Parameters for cost estimation in shell and tube heat exchangers network synthesis: A systematic literature review on 30 years of research
Transient Response of an Axially-Grooved, Aluminum-Ammonia Heat Pipe with the Presence of Non-condensable Gas