MATERIALS (BASEL)

Visão geral
Metrics
Identidade
Informação adicional documento
Ver todos

Qualis

A3

código do país

CH

tipo

journal

publicação venue de

3D Surface Scanning-A Novel Protocol to Characterize Virtual Nickel-Titanium Endodontic Instruments. 16:3636-3652. 2023-01-01
An Overview on the Effect of Severe Plastic Deformation on the Performance of Magnesium for Biomedical Applications. 16:2401. 2023-01-01
Analysis of the Microstructure and Porosity of Cement Pastes with Functionalized Nanosilica with Different Contents of Aminosilane. 16:5675-5691. 2023-01-01
Assessing the Rheological, Mechanical, and Photocatalytic Properties of Niobium Oxide-Incorporated White Cement Pastes. 16:4090. 2023-01-01
Bacterial Detection, Deformation, and Torque Loss on Dental Implants with Different Tapered Connections Compared with External Hexagon Connection after Thermomechanical Cycling. 16:3904-3924. 2023-01-01
Bioabsorbable Polymeric Stent for the Treatment of Coarctation of the Aorta (CoA) in Children: A Methodology to Evaluate the Design and Mechanical Properties of PLA Polymer. 16:4403. 2023-01-01
Biofuels and Nanocatalysts: Python Boosting Visualization of Similarities. 16:1175. 2023-01-01
Clinical Assessment of Biphasic Calcium Phosphate in Granules and Paste Forms in Human Maxillary Sinus Bone Augmentation: A Randomized, Split-Mouth Clinical Trial. 16:1059-1069. 2023-01-01
Comparative Study of Corrosion Behaviors of WC-NiMo and WC-Co Cemented Carbides. 16:4480-4494. 2023-01-01
Comparison of the Permeability of Potential Ballast Rocks from Northern Rio de Janeiro State under Different Fouling Rates after Sodium Sulfate Attack. 16:1-18. 2023-01-01
Conventional and Digital Impressions for Fabrication of Complete Implant-Supported Bars: A Comparative In Vitro Study. 16:4176. 2023-01-01
Different species of marine sponges diverge in osteogenic potential when therapeutically applied as natural scaffolds for bone regeneration in rats. 14:122-x. 2023-01-01
Digital Image Correlation for Measuring Full-Field Residual Stresses in Wire and Arc Additive Manufactured Components. 16:1702-1722. 2023-01-01
Durability of Concrete with Partial Replacement of Portland Cement by Incorporating Reactive Magnesium Oxide and Fly Ash. 16:2670. 2023-01-01
Eco-friendly polysaccharide-based synthesis of nanostructured MgO: Application in the removal of Cu2+ in wastewater. 16:693-y. 2023-01-01
Effect of Antirotational Two-Piece Titanium Base on the Vertical Misfit, Fatigue Behavior, Stress Concentration, and Fracture Load of Implant-Supported Zirconia Crowns. 16:1-15. 2023-01-01
Effect of Bioactive Filler Addition on the Mechanical and Biological Properties of Resin-Modified Glass Ionomer. 1:1-15. 2023-01-01
Effect of Carbon Nanotubes on the Na+ Intercalation Capacity of Binder Free Mn2V2O7-CNTs Electrode: A Structural Investigation. 16:2-12. 2023-01-01
Effect of Enterococcus faecalis Biofilm on Corrosion Kinetics in Titanium Grade 4 Alloys with Different Surface Treatments. 16:4532. 2023-01-01
Effect of Reducing the Size and Number of Faces of Polyhedral Specimen on Wood Characterization by Ultrasound. 16:1-15. 2023-01-01
Effect of the Application of Sunflower Biochar and Leafy Trees Biochar on Soil Hydrological Properties of Fallow Soils and under Soybean Cultivation. 16:1737. 2023-01-01
Effective Governing Equations for Viscoelastic Composites. 16:4944-4964. 2023-01-01
Effects of Particle Size Distribution of Standard Sands on the Physical-Mechanical Properties of Mortars. 16:844. 2023-01-01
Effects of Substitution and Substrate Strain on the Structure and Properties of Orthorhombic Eu1−xYxMnO3 (0 ≤ x ≤ 0.5) Thin Films. 16:4553. 2023-01-01
Evaluation of Light Cementitious Matrix with Composite Textile Reinforcement from Garment Waste. 16:733-18. 2023-01-01
Evaluation of Physical-Chemical Properties of Contemporary CAD/CAM Materials with Chromatic Transition ¿Multicolor¿. 16:4189. 2023-01-01
Evaluation of Piezoresistive and Electrical Properties of Conductive Nanocomposite Based on Castor-Oil Polyurethane Filled with MWCNT and Carbon Black. 16:3223-3240. 2023-01-01
Evaluation of Thermochemical Treatments for Rice Husk Ash Valorisation as a Source of Silica in Preparing Geopolymers. 16:4667. 2023-01-01
Experimental and Numerical Study of the Influence of Pre-Existing Impact Damage on the Low-Velocity Impact Response of CFRP Panels. 16:914. 2023-01-01
Fast-setting calcium silicate-based pulp capping cements - integrated antibacterial, irritation and cytocompatibility assessment. 16:450. 2023-01-01
Flexural Strength Characteristics of Fiber-Reinforced Cemented Soil. 16:4185. 2023-01-01
Fluorinated Multi-Walled Carbon Nanotubes Coated Separator Mitigates Polysulfide Shuttle in Lithium-Sulfur Batteries. 16:1804. 2023-01-01
Freeze-Thaw Durability of Basalt Fibre Reinforced Bio-Based Unsaturated Polyester Composite. 16:5411. 2023-01-01
Identification of the Radiative Parameters-Albedo and Optical Thickness-Of the Juncus maritimus Fiber. 16:1-12. 2023-01-01
Impact of a Static Magnetic Field on Early Osseointegration: A Pilot Study in Canines. 16:1846. 2023-01-01
Impact of a static magnetic field on early osseointegration: a pilot study in canine. 16:266-270. 2023-01-01
In Vitro Release and In Vivo Pharmacokinetics of Praziquantel Loaded in Different Polymer Particles. 16:3382. 2023-01-01
Increasing the Corrosion Resistance in the UNS S32750 Super Duplex Steel Welded Joints through Hybrid GTAW-Laser Welding and Nitrogen. 16:543-555. 2023-01-01
Influence of Pre-Milling of Cr3C2-25 NiCr Spray Powder on the Fatigue Life of HVOF-Sprayed Coating on ASTM A516 Steel Substrate. 16:1593. 2023-01-01
Insight into the Behavior of Mortars Containing Glass Powder: An Artificial Neural Network Analysis Approach to Classify the Hydration Modes. 16:943. 2023-01-01
Investigation into Brazilian Palygorskite for Its Potential Use as Pharmaceutical Excipient: Perspectives and Applications. 16:4962. 2023-01-01
Laser Ablated Albumin Functionalized Spherical Gold Nanoparticles Indicated for Stem Cell Tracking. 16:1034. 2023-01-01
Machine Learning-Based Prediction of the Compressive Strength of Brazilian Concretes: A Dual-Dataset Study. 16:4977. 2023-01-01
Mechanical Properties, Corrosion Behavior, and In Vitro Cell Studies of the New Ti-25Ta-25Nb-5Sn Alloy. 16:1970. 2023-01-01
Mechanical and Thermoanalytical Study of Polypropylene Geomats Exposed in the Field and the Laboratory. 16:4148-4162. 2023-01-01
Methods for Evaluating Pozzolanic Reactivity in Calcined Clays: A Review. 16:4778-4788. 2023-01-01
Modeling the Tensile Behavior of Fiber-Reinforced Strain-Hardening Cement-Based Composites: A Review. 16:1. 2023-01-01
Modified Silica Nanoparticles from Rice Husk Supported on Polylactic Acid as Adsorptive Membranes for Dye Removal. 16:2429. 2023-01-01
Multifunctional Integration of Optical Fibers and Nanomaterials for Aircraft Systems. 16:1433. 2023-01-01
Nanocomposite Films of Silver Nanoparticles and Conjugated Copolymer in Natural and Nano-Form: Structural and Morphological Studies. 16:3663. 2023-01-01
Novel Strategy for Surface Modification of Titanium Implants towards the Improvement of Osseointegration Property and Antibiotic Local Delivery. 16:2755. 2023-01-01
Numerical Modeling of the Dynamic Elastic Modulus of Concrete. 16:3955. 2023-01-01
Optimization of Pin Position and Angle for Z-Pin-Reinforced Foam Core Sandwich Structures. 16:1-14. 2023-01-01
Photoresponsive Activity of the Zn0.94Er0.02Cr0.04O Compound with Hemisphere-like Structure Obtained by Co-Precipitation. 16:1446. 2023-01-01
Physical and Chemical Effects in Blended Cement Pastes Elaborated with Calcined Clay and Nanosilica. 16:1837. 2023-01-01
Porous 8YSZ Ceramics Prepared with Alkali Halide Sacrificial Additives. 16:3509-3519. 2023-01-01
Probing the Use of Homemade Carbon Fiber Microsensor for Quantifying Caffeine in Soft Beverages. 16:1928. 2023-01-01
Ratiometric Electrochemical Sensor for Butralin Determination Using a Quinazoline-Engineered Prussian Blue Analogue. 16:1024. 2023-01-01
Scratch and Wear Behaviour of Co-Cr-Mo Alloy in Ringer?s Lactate Solution. 16:2923. 2023-01-01
Strength, Stiffness, and Microstructure of Stabilized Marine Clay-Crushed Limestone Waste Blends: Insight on Characterization through Porosity-to-Cement Index. 16:4983. 2023-01-01
Study of Structural and Optical Properties of Titanate Nanotubes with Erbium under Heat Treatment in Different Atmospheres. 16:1842. 2023-01-01
Substrate-Induced Changes on the Optical Properties of Single-Layer WS2. 16:2591. 2023-01-01
Surface Characterization of New β Ti-25Ta-Zr-Nb Alloys Modified by Micro-Arc Oxidation. 16:2352-2352-12. 2023-01-01
Surface Modification of an Absorbable Bimodal Fe-Mn-Ag Alloy by Nitrogen Plasma Immersion Ion Implantation. 16:1048. 2023-01-01
Synthesis of Blue Gahnite (ZnAl2O4:Co, Nd): A Cost-Effective Method for Producing Solar-Reflective Pigments for Cool Coatings. 16:1696. 2023-01-01
The Impact of Distinct Superplasticizers on the Degradation of Concrete Affected by Alkali-Silica Reaction (ASR). 16:3374. 2023-01-01
The influence of the synthesis method on the characteristics of BaTiO3. 16:1-13. 2023-01-01
Thermal Expansion and Rattling Behavior of Gd-Filled Co4Sb12 Skutterudite Determined by High-Resolution Synchrotron X-ray Diffraction. 16:370. 2023-01-01
Three-Dimensional Characterization of Polyurethane Foams Based on Biopolyols. 16:2118. 2023-01-01
Ti-15Zr and Ti-15Zr-5Mo Biomaterials Alloys: An Analysis of Corrosion and Tribocorrosion Behavior in Phosphate-Buffered Saline Solution. 16:1. 2023-01-01
Use of a Waste-Derived Linde Type-A Immobilized in Agarose for the Remediation of Water Impacted by Coal Acid Mine Drainage at Pilot Scale. 16:4038-16. 2023-01-01
W-doped Lanthanum Molybdenum Oxide/Lithium-Sodium-Potassium Carbonate Composite Membranes for Carbon Dioxide Permeation. 16:5128. 2023-01-01
'Y-TZP Physicochemical Properties Conditioned with ZrO2 and SiO2 Nanofilms and Bond Strength to Dual Resin Cement'. 15:1-7921. 2022-01-01
-Sticky Bone- Preparation Device: A Pilot Study on the Release of Cytokines and Growth Factors. 15:00-1485. 2022-01-01
A Method for Determination of the Transmission Efficiency of a Silica Optical Fiber Cable Using a Solar Power Tower. 15:1511. 2022-01-01
A Multimethod Assessment of a New Customized Heat-Treated Nickel-Titanium Rotary File System. 15:5288-5300. 2022-01-01
Adsorption of Sodium Diclofenac in Functionalized Palygoskite Clays. 15:1-24. 2022-01-01
Aerogel Composites Produced from Silica and Recycled Rubber Sols for Thermal Insulation. 15:7897. 2022-01-01
Aging Ultraviolet Accelerated of a PET Nonwoven Geotextile and Thermoanalytical Evaluation (TG, DSC and TMA). 15:4157--. 2022-01-01
Amino-Functionalized Titanate Nanotubes: pH and Kinetic Study of a Promising Adsorbent for Acid Dye in Aqueous Solution. 15:6393. 2022-01-01
An Alternative Digital Image Correlation-Based Experimental Approach to Estimate Fracture Parameters in Fibrous Soft Materials. 15:2413. 2022-01-01
An Assessment on the Efficiency of Clothing with UV Protection among the Spanish Navy School Students. 15:6227-6236. 2022-01-01
An Evaluation of the Effects of Photobiomodulation Therapy on the Peri‐Implant Bone Healing of Implants with Different Surfaces: An In Vivo Study. 15:1-10. 2022-01-01
Antiferromagnet-Ferromagnet Transition in Fe1−xCuxNbO4. 15:7424-7435. 2022-01-01
Assessment of Conventionally and Digitally Fabricated Complete Dentures: A Comprehensive Review. 15:3868. 2022-01-01
Atmospheric Pressure Plasma-Treated Polyurethane Foam as Reusable Absorbent for Removal of Oils and Organic Solvents from Water. 15:7948-7963. 2022-01-01
Bioactive Glasses as Carriers of Cancer-Targeted Drugs: Challenges and Opportunities in Bone Cancer Treatment. 15:9082. 2022-01-01
Biochar Obtained from Caryocar brasiliense Endocarp for Removal of Dyes from the Aqueous Medium. 15:9076. 2022-01-01
Biological Graft as an Innovative Biomaterial for Complex Skin Wound Treatment in Dogs: A Preliminary Report. 15:6027. 2022-01-01
Biomechanical Behavior of Narrow Dental Implants Made with Aluminum- and Vanadium-Free Alloys: A Finite Element Analysis. 15:8903. 2022-01-01
Biopolymer-based films from sodium alginate and citrus pectin reinforced with SiO2. 15:3881-3893. 2022-01-01
Bond Behavior of a Bio-Aggregate Embedded in Cement-Based Matrix. 1:1. 2022-01-01
Carbon Nanofibers Grown in CaO for Self-Sensing in Mortar. 15:4951. 2022-01-01
Cellular Response of Human Osteoblasts to Different Presentations of Deproteinized Bovine Bone. 15:999-999. 2022-01-01
Ceramic Nanofiber Materials for Wound Healing and Bone Regeneration: A Brief Review. 15:3909. 2022-01-01
Characterisation of Alloy Composition of Protohistoric Small Boat Models from Sardinia (Italy). 15:1324. 2022-01-01
Characterization of a Magnesium Fluoride Conversion Coating on Mg-2Y-1Mn-1Zn Screws for Biomedical Applications. 15:8245. 2022-01-01
Clay Mineral Minerals as a Strategy for Biomolecule Incorporation: Amino Acids Approach. 15:64-77. 2022-01-01
Collagen Cross-Linking Lignin Improves the Bonding Performance of Etch-and-Rinse Adhesives to Dentin. 15:1. 2022-01-01
Compressive Strength Assessment of Soil-Cement Blocks Incorporated with Waste Tire Steel Fiber. 15:1777. 2022-01-01
Contribution of Asphalt Rubber Mixtures to Sustainable Pavements by Reducing Pavement Thickness. 15:8592. 2022-01-01
Contribution to Bone Formation of the Schneiderian Membrane after Sinus Augmentation. A Histological Study in Rabbits. 15:8077-epub. 2022-01-01
Correction: Carmo et al. Effects of the Incorporation of Distinct Cations in Titanate Nanotubes on the Catalytic Activity in NOx Conversion. Materials 2021, 14, 2181. 15:1423-1423. 2022-01-01
Crystal Structure and Electrical Properties of Ruthenium-Substituted Calcium Copper Titanate. 15:8500. 2022-01-01
Cu and As(V) Adsorption and Desorption on/from Different Soils and Bio-Adsorbents. 15:5023. 2022-01-01
Demolition Waste Potential for Completely Cement-Free Binders. 15:6018. 2022-01-01
Design, Metallurgical Features, and Mechanical Behaviour of NiTi Endodontic Instruments from Five Different Heat-Treated Rotary Systems. 15:1009-1023. 2022-01-01
Determination of Water Content in Direct Resin Composites Using Coulometric Karl Fischer Titration. 15:8524. 2022-01-01
Development of Biodegradable PLA/PBAT-Based Filaments for Fertilizer Release for Agricultural Applications. 15:2-1. 2022-01-01
Devising Bone Molecular Models at the Nanoscale: From Usual Mineralized Collagen Fibrils to the First Bone Fibers Including Hydroxyapatite in the Extra-Fibrillar Volume. 15:2274. 2022-01-01
Diabetes Mellitus and Dental Implants: A Systematic Review and Meta-Analysis. 15:3227. 2022-01-01
Effect of Bonding Protocols on the Performance of Luting Agents Applied to CAD-CAM Composites. 15:6004. 2022-01-01
Effect of Surface-Etching Treatment, Glaze, and the Antagonist on Roughness of a Hybrid Ceramic after Two-Body Wear. 15:6870. 2022-01-01
Effect of TiO2 Nanoparticles on the Fresh Performance of 3D-Printed Cementitious Materials. 15:3896. 2022-01-01
Effect of Topical PTH 1-34 Functionalized to Biogran® in the Process of Alveolar Repair in Rats Submitted to Orchiectomy. 15:207. 2022-01-01
Effect of ornamental stone waste incorporation on the rheology, hydration, microstructure, and CO2 emissions of Ordinary Portland Cement. 15:401. 2022-01-01
Effects of Osseodensification on Immediate Implant Placement: Retrospective Analysis of 211 Implants. 15:3539. 2022-01-01
Effects of the addition of superabsorbent polymer on the production and curing of self-compacting cement paste (PAA). 15:8478. 2022-01-01
Efficacy of Ciprofloxacin, Metronidazole and Minocycline in Ordered Mesoporous Silica against Enterococcus faecalis for Dental Pulp Revascularization: An In-Vitro Study. 15:2266-2276. 2022-01-01
Electric Arc Furnace Dust Recycled in 7075 Aluminum Alloy Composites Fabricated by Spark Plasma Sintering (SPS). 15:6587. 2022-01-01
Electrochemically Deposited Zinc (Tetraamino)phthalocyanine as a Light-activated Antimicrobial Coating Effective against S. aureus. 15:975. 2022-01-01
Electropolymerization of Metallo-Octaethylporphyrins: A Study to Explore Their Sensing Capabilities. 15:6598. 2022-01-01
Embossing pressure effect on mechanical and softness proper-ties of industrial base tissue papers with Finite Element Method validation. 1:1. 2022-01-01
Enhancement of Multi-Scale Self-Organization Processes during Inconel DA 718 Machining through the Optimization of TiAlCrSiN/TiAlCrN Bi-Nano-Multilayer Coating Characteristics. 15:1329. 2022-01-01
Enhancing the Impact Strength of Prepacked Aggregate Fibrous Concrete Using Asphalt-Coated Aggregates. 15:2598. 2022-01-01
Entomopathogenic Fungi-Mediated AgNPs: Synthesis and Insecticidal Effect against Plutella xylostella (Lepidoptera: Plutellidae). 15:7596-x. 2022-01-01
Evaluating the Feasibility of Using Brick Powder and Clay Powder in Cement Replacement. 15:8127. 2022-01-01
Evaluation of CNTs and SiC Whiskers Effect on the Rheology and Mechanical Performance of Metakaolin-Based Geopolymers. 15:6099. 2022-01-01
Evaluation of Two Beta-Tricalcium Phosphates with Different Particle Dimensions in Human Maxillary Sinus Floor Elevation: A Prospective, Randomized Clinical Trial. 15:1824-1834. 2022-01-01
Excessive Dental Bleaching with 22% Carbamide Peroxide Combined with Erosive and Abrasive Challenges: New Insights into the Morphology and Surface Properties of Enamel. 15:01-10. 2022-01-01
Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications. 15:7164. 2022-01-01
Exploiting the Physicochemical and Antimicrobial Properties of PHB/PEG and PHB/PEG/ALG-e Blends Loaded with Ag Nanoparticles. 15:7544. 2022-01-01
Failure Load and Fatigue Behavior of Monolithic and Bi-Layer Zirconia Fixed Dental Prostheses Bonded to One-Piece Zirconia Implants. 15:8465. 2022-01-01
Freezing and Thawing Resistance of Fine Recycled Concrete Aggregate (FRCA) Mixtures Designed with Distinct Techniques. 15:1-25. 2022-01-01
Heparin-Loaded Alginate Hydrogels: Characterization and Molecular Mechanisms of Their Angiogenic and Anti-Microbial Potential. 15:6683. 2022-01-01
Hybrid Lime-Pozzolan Geopolymer Systems: Microstructural, Mechanical and Durability Studies. 15:2736. 2022-01-01
Impedance Spectroscopy as a Methodology to Evaluate the Reactivity of Metakaolin Based Geopolymers. 15:8387. 2022-01-01
Implant?Abutment Misfit after Cyclic Loading: An In Vitro Experimental Study. 15:1-12. 2022-01-01
Improvement of the Quality of Recycled Concrete Aggregate Subjected to Chemical Treatments: A Review. 15:2740. 2022-01-01
Incorporation of Ornamental Stone Waste in the Manufacturing of Red Ceramics. 15:1-15. 2022-01-01
Influence of Abutment Design on Biomechanical Behavior to Support a Screw-Retained 3-Unit Fixed Partial Denture. 15:6235-6253. 2022-01-01
Influence of Anomalous Changes in the Crystal Structure on the Transport Properties of YbNi1−xCuxAl Series of Alloys. 15:1688. 2022-01-01
Influence of Quaternary Ammonium Salt Functionalized Chitosan Additive as Sustainable Filler for High-Density Polyethylene Composites. 15:7418-17. 2022-01-01
Influence of Sintering on Thermal, Mechanical and Technological Properties of Glass Foams Produced from Agro-Industrial Residues. 15:1-11. 2022-01-01
Influence of small amounts of ABS and ABS-MA on PA6 properties: evaluation of torque rheometry, mechanical, thermomechanical, thermal, morphological, and water absorption kinetics characteristics. 15:2502-25. 2022-01-01
Influence of the Mix Proportion and Aggregate Features on the Performance of Eco-Efficient Fine Recycled Concrete Aggregate Mixtures. 15:1-27. 2022-01-01
Influence of the Peek Abutments on Mechanical Behavior of the Internal Connections Single Implant. 15:8133-8148. 2022-01-01
Insights into Polymeric Materials for Prosthodontics and Dental Implantology. 15:5383. 2022-01-01
Insights into the Effect of Lithium Doping on the Deep Eutectic Solvent Choline Chloride:Urea. 15:7459. 2022-01-01
Investigating the correlation between the microstructure and electrical properties of FeSbO4 ceramics. 15:6555. 2022-01-01
Lightweight Design of Variable-Stiffness Cylinders with Reduced Imperfection Sensitivity Enabled by Continuous Tow Shearing and Machine Learning. 15:4117. 2022-01-01
Long-Term Clearance and Biodistribution of Magnetic Nanoparticles Assessed by AC Biosusceptometry. 15:2121-2136. 2022-01-01
Magnetic Zinc Oxide/Manganese Ferrite Composite for Photodegradation of the Antibiotic Rifampicin. 15:8185. 2022-01-01
Mapping bone marrow cell response from senile female rats on Ca-P-doped titanium coating. 15:1094-1105. 2022-01-01
Mechanical Feasibility Study of Pressed and Burned Red Ceramic Blocks as Structural and Sealing Masonry. 15:5004-5004. 2022-01-01
Mechanical Properties of Hybrid PVA-Natural Curaua Fiber Composites. 15:2808. 2022-01-01
Metal Knitting: A New Strategy for Cold Gas Spray Additive Manufacturing. 15:6785. 2022-01-01
Microwave versus Conventional Sintering of NiTi Alloys Processed by Mechanical Alloying. 15:5506. 2022-01-01
Molecularly Imprinted Membrane Produced by Electrospinning for β-Caryophyllene Extraction. 15:7275. 2022-01-01
Mortar Bond Strength: A Brief Literature Review, Tests for Analysis, New Research Needs and Initial Experiments. 15:2332. 2022-01-01
Multimethod Assessment of Design, Metallurgical, and Mechanical Characteristics of Original and Counterfeit ProGlider Instruments. 15:1-3980. 2022-01-01
Nuragic Working Tools Characterization with Corrosion Layer Determinations. 15:3879. 2022-01-01
Performance of Asphalt Rubber Mixture Overlays to Mitigate Reflective Cracking. 15:1-18. 2022-01-01
Peri-Implant Repair Using a Modified Implant Macrogeometry in Diabetic Rats: Biomechanical and Molecular Analyses of Bone-Related Markers. 15:2317-2320. 2022-01-01
Photovoltaic Electrochemically Driven Degradation of Calcon Dye with Simultaneous Green Hydrogen Production. 15:7445. 2022-01-01
Physicochemical, Mechanical, and Esthetic Properties of the Composite Resin Manipulated with Glove Powder and Adhesive as a Modeling Liquid. 15:7791. 2022-01-01
Plasma-saline solution interaction: A systematic review. 1:1-20. 2022-01-01
Polymeric Orthosis with Electromagnetic Stimulator Controlled by Mobile Application for Bone Fracture Healing: Evaluation of Design Concepts for Medical Use. 15:8141-8160. 2022-01-01
Polysaccharide-Based Membrane Biocompatibility Study of Anacardium occidentale L. and Polyvinyl Alcohol after Subcutaneous Implant in Rats. 14:1-19. 2022-01-01
Pressure Tuning of Superconductivity of LaPt4Ge12 and PrPt4Ge12 Single Crystals. 15:2743. 2022-01-01
Processing and Characterization of a New Quaternary Alloy Ti10Mo8Nb6Zr for Potential Biomedical Applications. 15:8636. 2022-01-01
Production of Belite Based Clinker from Ornamental Stone Processing Sludge and Calcium Carbonate Sludge with Lower CO2 Emissions. 15:1-16. 2022-01-01
Pulsatile Controlled Release and Stability Evaluation of Polymeric Particles Containing Piper nigrum Essential Oil and Preservatives. 15:5415. 2022-01-01
Pulsed FCAW of Martensitic Stainless Clads onto Mild Steel: Microstructure, Hardness, and Residual Stresses. 15:1-23. 2022-01-01
Radiopaque Crystalline, Non-Crystalline and Nanostructured Bioceramics. 15:1-34. 2022-01-01
Recycled Aggregate: A Viable Solution for Sustainable Concrete Production. 15:5276. 2022-01-01
Recycled PET Sand for Cementitious Mortar. 15:273-10. 2022-01-01
Relation between Shear Stresses and Flexural Tensile Stresses from Standardized Tests of Extracted Prismatic Specimens of an SFRC Bridge Girder. 15:8286. 2022-01-01
Removing Pollutants from Sewage Waters with Ground Apricot Kernel Shell Material. 15:3428. 2022-01-01
Residual mechanical properties and durability of high-strength concrete with polypropylene fibers in high temperatures. 15:1-26. 2022-01-01
Reusing Construction and Demolition Waste to Prepare Alkali-Activated Cement. 15:3437. 2022-01-01
Setting the Optimal Laser Power for Sustainable Powder Bed Fusion Processing of Elastomeric Polyesters: A Combined Experimental and Theoretical Study. 15:385. 2022-01-01
Smart Bone Graft Composite for Cancer Therapy Using Magnetic Hyperthermia. 15:3187. 2022-01-01
Spent Coffee Grounds as Building Material for Non-Load-Bearing Structures. 15:1689. 2022-01-01
Stability of Spin-Wave Solitons in Bose-Einstein Condensates of Magnons: A Possible Application in Ferromagnetic Films. 15:2551. 2022-01-01
Stress Distribution Pattern in Zygomatic Implants Supporting Different Superstructure Materials. 15:4953. 2022-01-01
Study for Performance Increase of a Extractor Device by Steel Replacement of AISI 304 Steel for AISI 420 Steel. 15:280. 2022-01-01
Study of Metakaolinite Geopolymeric Mortar with Plastic Waste Replacing the Sand: Effects on the Mechanical Properties, Microstructure, and Efflorescence. 15:8626. 2022-01-01
Surface Characteristics and Microbiological Analysis of a Vat-Photopolymerization Additive-Manufacturing Dental Resin. 15:425-432. 2022-01-01
Surface Morphology and Spectroscopic Features of Homoepitaxial Diamond Films Prepared by MWPACVD at High CH4 Concentrations. 15:7416. 2022-01-01
Synthesis and Characterization of LaNi0.5Ti0.5O3 and La2NiTiO6 Double Perovskite Nanoparticles. 15:2411. 2022-01-01
Synthesis and Characterization of Magnetic Composite Theragnostics by Nano Spray Drying. 15:1755. 2022-01-01
Synthesis and Characterization of Nanocrystalline Boron-Nitride Thin Films by Ion Milling and Thermal Treatment for Tribological Coatings: An Approach to Quantifying the Growth Dynamic Process. 15:1761-1782. 2022-01-01
Technogenic Fiber Wastes for Optimizing Concrete. 15:5058. 2022-01-01
Tenebrio molitor Larvae-Based Magnetic Polyurea Employed as Crude Oil Spill Removal Tool. 15:5063. 2022-01-01
Texturing Methods of Abrasive Grinding Wheels: A Systematic Review. 15:8044. 2022-01-01
The Effect of Smoking and Brushing on the Color Stability and Stainability of Different CAD/CAM Restorative Materials. 15:6901. 2022-01-01
The Effect of a 10-MDP-Based Dentin Adhesive as Alternative for Bonding to Implant Abutment Materials. 15:5449-5456. 2022-01-01
The Influence of the Soaking Temperature Rotary Forging and Solution Heat Treatment on the Structural and Mechanical Behavior in Ni-Rich NiTi Alloy. 15:63. 2022-01-01
The Study of New NiTi Actuators to Reinforce the Wing Movement of Aircraft Systems. 15:4787. 2022-01-01
Three-Dimensional Nanoscale Morphological Surface Analysis of Polymeric Particles Containing Allium sativum Essential Oil. 15:2635. 2022-01-01
TiO2/Karaya composite for photoinactivation of bacteria. 15:4559. 2022-01-01
Titanium Dental Implants: An Overview of Applied Nanobiotechnology to Improve Biocompatibility and Prevent Infections. 15:3150. 2022-01-01
Tool Wear Effect on Surface Integrity in AISI 1045 Steel Dry Turning. 15:2031. 2022-01-01
Tribocorrosion Behavior of NiTi Biomedical Alloy Processed by an Additive Manufacturing Laser Beam Directed Energy Deposition Technique. 15:691. 2022-01-01
Unravelling the Affinity of Alkali-Activated Fly Ash Cubic Foams towards Heavy Metals Sorption. 15:1453. 2022-01-01
Worst-Case X-ray Photon Energies in Ultrashort Pulse Laser Processing. 15:8996. 2022-01-01
XPS Study in BiFeO3 Surface Modified by Argon Etching. 15:4285. 2022-01-01
Y-TZP physico-chemical properties conditioned with ZrO2 and SiO2 nanofilms and bond strength to dual resin cement.. 15:7905. 2022-01-01
first_pagesettings Open AccessArticle Electric Arc Furnace Dust Recycled in 7075 Aluminum Alloy Composites Fabricated by Spark Plasma Sintering (SPS). 15:6587-6599. 2022-01-01
3D Scaffolds to Model the Hematopoietic Stem Cell Niche: Applications and Perspectives. 14:569. 2021-01-01
A Brief Photocatalytic Study of ZnO Containing Cerium towards Ibuprofen Degradation. 14:5891-5891-17. 2021-01-01
A Combined Experimental and Modeling Study for Pellet-Fed Extrusion-Based Additive Manufacturing to Evaluate the Impact of the Melting Efficiency. 14:5566. 2021-01-01
A Deep Learning Method for the Impact Damage Segmentation of Curve-Shaped CFRP Specimens Inspected by Infrared Thermography. 251:112625-413. 2021-01-01
A Magnetic Force Microscopy Study of Patterned T-Shaped Structures. 14:1567. 2021-01-01
A Novel Implementation of the LDEM in the Ansys LS-DYNA Finite Element Code. 14:7792. 2021-01-01
A Novel Method for the Detection of SARS-CoV-2 Based on Graphene-Impedimetric Immunosensor. 14:4230. 2021-01-01
A State of the Art of the Overall Energy Efficiency of Wood Buildings-An Overview and Future Possibilities. 14:1848. 2021-01-01
APPLICATION OF PLASTIC WASTES IN CONSTRUCTION MATERIALS: A REVIEW USING THE CONCEPT OF LIFE-CYCLE ASSESSMENT IN THE CONTEXT OF RECENT RESEARCH FOR FUTURE PERSPECTIVES. 14:3549. 2021-01-01
Active Tactile Sensibility of Brånemark Protocol Prostheses: A Case-Control Clinical Study. 14:4644. 2021-01-01
Adsorption Behavior of Crystal Violet and Congo Red Dyes on Heat-Treated Brazilian Palygorskite: Kinetic, Isothermal and Thermodynamic Studies. 14:5688-5710. 2021-01-01
Antimicrobial PAA/PAH electrospun fiber containing green synthesized zinc oxide nanoparticles for wound healing. 14:2889-2902. 2021-01-01
Application of Construction and Demolition Waste in Civil Construction in the Brazilian Amazon-Case Study of the City of Rio Branco. 14:2247. 2021-01-01
Assessment of morphological, physical, thermal and thermal conductivity properties of polypropylene/lignosulfonate blends. 14:543-01-543-10. 2021-01-01
Bioengineered Fluorescent Nanoprobe Conjugates for Tracking Human Bone Cells: In Vitro Biocompatibility Analysis. 14:4422-22. 2021-01-01
Biomaterials and Adipose-Derived Mesenchymal Stem Cells for Regenerative Medicine: A Systematic Review. 14:4641. 2021-01-01
Biomedical Radioactive Glasses for Brachytherapy. 14:1131. 2021-01-01
Calculation of Dynamic Viscosity in Concentrated Cementitious Suspensions: Probabilistic Approximation and Bayesian Analysis. 14:1971. 2021-01-01
Cashew Gum Polysaccharide Nanoparticles Grafted with Polypropylene Glycol as Carriers for Diclofenac Sodium. 14:2115. 2021-01-01
Characterization of Ternary CuNiCo Metallic Nanoparticles Produced by Hydrogen Reduction. 14:6006. 2021-01-01
Characterization, Antimicrobial Effects, and Cytocompatibility of a Root Canal Sealer Produced by Pozzolan Reaction between Calcium Hydroxide and Silica. 14:2863. 2021-01-01
Chitosan-Based Biomaterial, Calcium Hydroxide and Chlorhexidine for Potential Use as Intracanal Medication. 14:488-500. 2021-01-01
Clay Ceramic Waste as Pozzolan Constituent in Cement for Structural Concrete. 14:2917. 2021-01-01
Colloidal Processing of Y0.08Zr0.92O2/La0.80Sr0.20MnO3 Semi-Cells Using a Sr-Doped Lanthanum Manganite Synthesized by a Citrate Route. 14:7831. 2021-01-01
Comparison of Different Synthetic Routes of Hybrid Hematite-TiO2 Nanotubes-Based Electrodes. 14:4501. 2021-01-01
Computer aided design modelling and finite element analysis of premolar proximal cavities restored with resin composites. 14:2366. 2021-01-01
Cranberry Juice Extract Rapidly Protects Demineralized Dentin against Digestion and Inhibits Its Gelatinolytic Activity. 14:3637. 2021-01-01
Current Applications of Recycled Aggregates from Construction and Demolition: A Review. 14:1700. 2021-01-01
Cyclodextrins as Supramolecular Recognition Systems: Applications in the Fabrication of Electrochemical Sensors. 14:1668. 2021-01-01
Dental Implants Inserted in Fresh Extraction Sockets versus Healed Sites: A Systematic Review and Meta-Analysis. 14:7903. 2021-01-01
Detection and Imaging of Damages and Defects in Fibre-Reinforced Composites by Magnetic Resonance Technique. 14:977. 2021-01-01
Development and Characterization of Activated Carbon from Olive Pomace: Experimental Design, Kinetic and Equilibrium Studies in Nimesulide Adsorption. 14:6820-6837. 2021-01-01
Development of Bacterial Cellulose Biocomposites Combined with Starch and Collagen and Evaluation of Their Properties. 14:458. 2021-01-01
Development of Gelatin/Misoprostol Compounds for Use in Pregnancy Failures. 14:1-10. 2021-01-01
Development of Multifunctional Materials Based on Poly(ether ether ketone) with Improved Biological Performances for Dental Applications. 14:1047. 2021-01-01
Direct 3D Printing of Clear Orthodontic Aligners: Current State and Future Possibilities. 14:1799. 2021-01-01
Effect of Calcination Temperature and Chemical Composition of PAN-Derived Carbon Microfibers on N2, CO2, and CH4 Adsorption. 14:3914. 2021-01-01
Effect of Cement Layer Thickness on the Immediate and Long-Term Bond Strength and Residual Stress between Lithium Disilicate Glass-Ceramic and Human Dentin. 14:5153. 2021-01-01
Effect of Different Root Canal Irrigant Solutions on the Release of Dentin‐Growth Factors: A Systematic Review and Meta‐Analysis. 14:3-18. 2021-01-01
Effect of Hydroxyapatite Microspheres, Amoxicillin-Hydroxyapatite and Collagen-Hydroxyapatite Composites on Human Dental Pulp-Derived Mesenchymal Stem Cells. 14:7515-15. 2021-01-01
Effect of Restorative Material on Mechanical Response of Provisional Endocrowns: A 3D-FEA Study. 14:649. 2021-01-01
Effect of Wear Conditions, Parameters and Sliding Motions on Tribological Characteristics of Basalt and Glass Fibre Reinforced Epoxy Composites. 14:701. 2021-01-01
Effect of feldspar substitution by basalt on pyroplastic behaviour of porcelain tile composition. 14:1-19. 2021-01-01
Effects of the Incorporation of Distinct Cations in Titanate Nanotubes on the Catalytic Activity in NOx Conversion. 14:2181. 2021-01-01
Electronic Waste Low-Temperature Processing: An Alternative Thermochemical Pretreatment to Improve Component Separation. 14:6228. 2021-01-01
Environment-Friendly Electrochemical Processes. 14:1548. 2021-01-01
Essential Material Knowledge and Recent Model Developments for REBCO-Coated Conductors in Electric Power Systems. 14:1892-35. 2021-01-01
Evaluation of Wear Behaviour in Metallic Binders Employed in Diamond Tools for Cutting Stone. 14:3988. 2021-01-01
Experimental Analysis of NiTi Alloy during Strain-Controlled Low-Cycle Fatigue. 14:4455. 2021-01-01
Experimental and numerical comparison of impact behavior between thermoplastic and thermoset composite for wind turbine blades. 14:1-23. 2021-01-01
Fibrin Biopolymer Incorporated with Antimicrobial Agents: A Proposal for Coating Denture Bases. 14:1618-1632. 2021-01-01
Genotoxicity Assessment of Metal-Based Nanocomposites Applied in Drug Delivery. 14:6551. 2021-01-01
Graphene-Based Materials Immobilized within Chitosan: Applications as Adsorbents for the Removal of Aquatic Pollutants. 14:3655. 2021-01-01
Green Composite Sensor for Monitoring Hydroxychloroquine in Different Water Matrix. 14:4990. 2021-01-01
Green Nanocoatings Based on the Deposition of Zirconium Oxide: The Role of the Substrate. 14:1043. 2021-01-01
Histomorphometric, Immunohistochemical and Microtomographic Comparison between Autogenous and Xenogenous Bone Blocks for Mandibular Lateral Augmentation in Rabbits. 14:6049. 2021-01-01
Holmium-doped containing bioactive glasses dispersed in Poloxamer 407 hydrogel as a theragenerative composite for bone cancer treatment. 1:1-1476. 2021-01-01
Impact of Warm Vertical Compaction on the Sealing Ability of Calcium Silicate-Based Sealers: A Confocal Microscopic Evaluation. 14:372. 2021-01-01
Improving the Room-Temperature Ferromagnetism in ZnO and Low-Doped ZnO:Ag Films Using GLAD Sputtering. 14:5337. 2021-01-01
In Situ Monitoring of Additive Manufacturing Using Digital Image Correlation: A Review. 14:1511. 2021-01-01
In Vitro Evaluation of Acellular Collagen Matrices Derived from Porcine Pericardium: Influence of the Sterilization Method on Its Biological Properties. 14:6255. 2021-01-01
In Vitro Evaluation of Desensitizing Agents Containing Bioactive Scaffolds of Nanofibers on Dentin Remineralization. 14:1056. 2021-01-01
In‐Plane Shear Strength of Single‐Lap Co‐Cured Joints of Self‐Reinforced Polyethylene Composites. 14:1517. 2021-01-01
Incorporation of Arginine to Commercial Orthodontic Light-Cured Resin Cements-Physical, Adhesive, and Antibacterial Properties. 14:4391. 2021-01-01
Influence of Contact Plateaus Characteristics Formed on the Surface of Brake Friction Materials in Braking Performance through Experimental Tests. 14:4931. 2021-01-01
Influence of Ultrasonication of Functionalized Carbon Nanotubes on the Rheology, Hydration, and Compressive Strength of Portland Cement Pastes. 14:5248-5269. 2021-01-01
Lithium Disilicate Ceramic Endocrown Biomechanical Response According to Different Pulp Chamber Extension Angles and Filling Materials. 14:1307. 2021-01-01
Magnetic Field-Assisted Photocatalytic Degradation of Organic Pollutants over Bi1−xRxFeO3 (R = Ce, Tb; x = 0.00, 0.05, 0.10 and 0.15) Nanostructures. 14:4079. 2021-01-01
Materials for Production of High and Ultra-High Performance Concrete: Review and Perspective of Possible Novel Materials. 14:4304. 2021-01-01
Mechanical Properties and Microstructure of Epoxy Mortars Made with Polyethylene and Poly(Ethylene Terephthalate) Waste. 14:2203. 2021-01-01
Mechanical Properties of Mortars Reinforced with Amazon Rainforest Natural Fibers. 14:155-19. 2021-01-01
Mechanical Stability of Screw-Retained Monolithic and Bi-layer Posterior Hybrid Abutment Crowns after Thermomechanical Loading: An In Vitro Study. 14:7539. 2021-01-01
Mechanical behavior of different restorative materials and onlay preparation designs in endodontically treated molars.. 14:1-13. 2021-01-01
Memory Effect on a LDH/zeolite A Composite: An XRD In Situ Study. 14:2102. 2021-01-01
Metastable Materials Accessed under Moderate Pressure Conditions (P ≤ 3.5 GPa) in a Piston-Cylinder Press. 14:1946. 2021-01-01
Microstructure Effect of Heat Input on Ballistic Performance of Welded High Strength Armor Steel. 14:1-12. 2021-01-01
Microstructure and Mechanical Properties of AA7075 Aluminum Alloy Fabricated by Spark Plasma Sintering (SPS). 14:430-441. 2021-01-01
Modulation of Crystallinity through Radiofrequency Electromagnetic Fields in PLLA/Magnetic Nanoparticles Composites: A Proof of Concept. 14:4300. 2021-01-01
Molybdenum Oxide Thin Films Grown on Flexible ITO-Coated PET Substrates. 14:821. 2021-01-01
Natural Aging of Ethylene-Propylene-Diene Rubber under Actual Operation Conditions of Electrical Submersible Pump Cables. 14:5520. 2021-01-01
Natural Fibres as a Sustainable Reinforcement Constituent in Aligned Discontinuous Polymer Composites Produced by the HiPerDiF Method. 14:1-17. 2021-01-01
New Clayey Deposit and Their Potential as Raw Material for Red or Structured Ceramics: Technological Characterization. 14:7672. 2021-01-01
Oil Spill Sorber Based on Extrinsically Magnetizable Porous Geopolymer. 14:1-11. 2021-01-01
Oral Tissue Interactions and Cellular Response to Zirconia Implant-Prosthetic Components: A Critical Review. 14:2825. 2021-01-01
Organic Thin-Film Transistors as Gas Sensors: A Review. 14:3. 2021-01-01
Osteosphere Model to Evaluate Cell-Surface Interactions of Implantable Biomaterials. 14:5858. 2021-01-01
Performance of Mortars with Commercially-Available Reactive Magnesium Oxide as Alternative Binder. 14:938. 2021-01-01
Phase Transition and Coefficients of Thermal Expansion in Al2−xInxW3O12 (0.2 ≤ x ≤ 1). 14:4021. 2021-01-01
Phononic bandgap optimization in sandwich panels using cellular truss cores. 14:1-19. 2021-01-01
Photoresponsive Amide-Based Derivatives of Azobenzene-4,4--Dicarboxylic Acid-Experimental and Theoretical Studies. 14:3995. 2021-01-01
Physical and Chemical Properties of Waste Foundry Exhaust Sand for Use in Self-Compacting Concrete. 14:5629-5650. 2021-01-01
Process-Structure-Property Relationships of Copper Parts Manufactured by Laser Powder Bed Fusion. 14:2945. 2021-01-01
Prognosis of Regenerative Endodontic Procedures in Mature Teeth: A Systematic Review and Meta-Analysis of Clinical and Radiographic Parameters. 14:4418-18. 2021-01-01
Quantitative Comparison of Binary Mix of Agro-Industrial Pozzolanic Additions for Elaborating Ternary Cements: Kinetic Parameters. 14:2944. 2021-01-01
Quartzite Mining Waste: Diagnosis of ASR Alkali-Silica Reaction in Mortars and Portland Cement Concrete. 14:7642-16. 2021-01-01
Repair of Critical Size Bone Defects Using Synthetic Hydroxyapatite or Xenograft with or without the Bone Marrow Mononuclear Fraction: A Histomorphometric and Immunohistochemical Study in Rat Calvaria. 14:2854. 2021-01-01
Rheological and the Fresh State Properties of Alkali-Activated Mortars by Blast Furnace Slag. 14:2069. 2021-01-01
Rosehip Extract-Functionalized Magnesium Hydroxide Nanoparticles and Its Effect on Osteoblastic and Osteoclastic Cells. 14:4172. 2021-01-01
Silane-Coating Strategy for Titanium Functionalization Does Not Impair Osteogenesis In Vivo. 14:1814-1821. 2021-01-01
Simulation of the Attrition of Recycled Concrete Aggregates during Concrete Mixing. 14:3007. 2021-01-01
Strategies for cancer treatment based on photonic nanomedicine. 14:1435-1463. 2021-01-01
Stress Concentration of Endodontically Treated Molars Restored with Transfixed Glass Fiber Post: 3D-Finite Element Analysis. 14:4249. 2021-01-01
Structural, Mechanical, and Decorative Properties of Sputtered TiN and Ti (N, C) Films for Orthodontic Applications; An In Vitro Study. 14:5175. 2021-01-01
Study of the Ultraviolet Effect and Thermal Analysis on Polypropylene Nonwoven Geotextile. 14:1-1080. 2021-01-01
Superconducting Properties and Electron Scattering Mechanisms in a Nb Film with a Single Weak-Link Excavated by Focused Ion Beam. 14:7274. 2021-01-01
Surface Modification of Polyester Fabrics by Ozone and Its Effect on Coloration Using Disperse Dyes. 14:3492. 2021-01-01
Technological Characterization of PET¿Polyethylene Terephthalate¿Added Soil-Cement Bricks. 14:1/5035-13. 2021-01-01
The Antibacterial Effects of Resin-based Dental Sealants: A Systematic Review of in Vitro Studies. 14:413. 2021-01-01
The Impact of Dental Implant Length on Failure Rates: A Systematic Review and Meta-Analysis. 14:3972. 2021-01-01
The Influence of Lime Solution in Kneading Water Substitution on Cement Roughcast and Mortar Coating. 14:4174. 2021-01-01
The Influence of Temperature in the Al 2024-T3 Aluminum Plates Subjected to Impact: Experimental and Numerical Approaches. 14:4268. 2021-01-01
The Possible Detriment of Oxygen in Creep of Alumina and Zirconia Ceramic Composites Reinforced with Graphene. 14:984. 2021-01-01
The Use of Anodic Oxides in Practical and Sustainable Devices for Energy Conversion and Storage. 14:383-1. 2021-01-01
The effect of SCMs in blended cements on sorption characteristics of superabsorbent polymers. 14:1609. 2021-01-01
Ti-Ions and/or Particles in Saliva Potentially Aggravate Dental Implant Corrosion. 14:5733. 2021-01-01
Titanium Allergy Caused by Dental Implants: A Systematic Literature Review and Case Report. 14:5239-13. 2021-01-01
Transparent Glasses and Glass-Ceramics in the Ternary System TeO2-Nb2O5-PbF2. 14:317. 2021-01-01
True Strength of Ceramic Fiber Bundles: Experiments and Simulations. 14:64. 2021-01-01
Utilization of Thermally Treated SiC Nanowhiskers and Superplasticizer for Cementitious Composite Production. 14:1-12. 2021-01-01
Vehiculation of Methyl Salicylate from Microcapsules Supported on Textile Matrix. 14:1087. 2021-01-01
Vertical Discrepancy in Height of Morse Cone Abutments Submitted to Different Torque Forces. 14:4950-9. 2021-01-01
What Is Driving the Growth of Inorganic Glass in Smart Materials and Opto-Electronic Devices?. 14:2926. 2021-01-01
X-ray Emission Hazards from Ultrashort Pulsed Laser Material Processing in an Industrial Setting. 14:7163. 2021-01-01
3D Mesoscale Finite Element Modelling of Concrete under Uniaxial Loadings. 13:4585. 2020-01-01
A Comparative Analysis of Implants Presenting Different Diameters: Extra-Narrow, Narrow and Conventional. 13:1-11. 2020-01-01
A Facile and Green Synthesis of a MoO2-Reduced Graphene Oxide Aerogel for Energy Storage Devices. 13:594. 2020-01-01
A Low-Cost Open Source Device for Cell Microencapsulation. 13:5090-5104. 2020-01-01
A Methodology for Porcine Circovirus 2 (PCV-2) Quantification Based on Gold Nanoparticles. 13:1-1. 2020-01-01
A Novel Modelling Methodology Which Predicts the Structural Behaviour of Vertebral Bodies under Axial Impact Loading: A Finite Element and DIC Study. 13:4262. 2020-01-01
A Novel Role of Ascorbic Acid in Anti-Inflammatory Pathway and ROS Generation in HEMA Treated Dental Pulp Stem Cells. 13:130. 2020-01-01
A Review on Chitosan’s Uses as Biomaterial: Tissue Engineering, Drug Delivery Systems and Cancer Treatment. 13:4995-5066. 2020-01-01
A Study on the Reduction in Hydration Heat and Thermal Strain of Concrete with Addition of Sugarcane Bagasse Fiber. 13:3005. 2020-01-01
Acid Red 66 Dye Removal from Aqueous Solution by Fe/C-based Composites: Adsorption, Kinetics and Thermodynamic Studies. 13:1107-1130. 2020-01-01
Adipose Tissue-Derived Stem Cells: The Biologic Basis and Future Directions for Tissue Engineering. 13:3210. 2020-01-01
Adsorption of Anionic Dye on the Acid-Functionalized Bentonite. 13:3600-3612. 2020-01-01
Anti‐EGFR‐Coated Gold Nanoparticles In Vitro Carry 5‐Fluorouracil to Colorectal Cancer Cells. 13:1-13. 2020-01-01
Applicability of Cork as Novel Modifiers to Develop Electrochemical Sensor for Caffeine Determination. 14:1-17. 2020-01-01
Assessment of CVD- and PVD-Coated Carbides and PVD-Coated Cermet Inserts in the Optimization of Surface Roughness in Turning of AISI 1045 Steel. 13:5231. 2020-01-01
Assessment of the Mechanical Parameters of Resin Composites with the Addition of Various Types of Fibres. 13:1378. 2020-01-01
Atmospheric Pressure Plasma Deposition of Organosilicon Thin Films by Direct Current and Radio-frequency Plasma Jets. 13:1296. 2020-01-01
Atmospheric pressure plasma chemical vapor deposition of carvacrol thin films on stainless steel to reduce the formation of E. coli and S. aureus biofilms. 13:3166. 2020-01-01
Biocompatible Gels of Chitosan-Buriti Oil for Potential Wound Healing Applications. 13:01-17. 2020-01-01
Bond Strength of Metallic or Ceramic Orthodontic Brackets to Enamel, Acrylic, or Porcelain Surfaces. 13:5197. 2020-01-01
Characterization of Crystalline Phase of TiO2 Nanocrystals, Cytotoxicity and Cell Internalization Analysis on Human Adipose Tissue-Derived Mesenchymal Stem Cells. 13:4071-4086. 2020-01-01
Chlorapatite Derived From Fish Scales. 13:1/1129-11. 2020-01-01
Clean-Room Lithographical Processes for the Fabrication of Graphene Biosensors. 13:5728. 2020-01-01
Combined Effect of Melittin and DNase on Enterococcus faecalis Biofilms and Its Susceptibility to Sodium Hypochlorite. 13:3740. 2020-01-01
Comparison between Plasma Electrolytic Oxidation Coating and Sandblasted Acid-Etched Surface Treatment: Histometric, Tomographic, and Expression Levels of Osteoclastogenic Factors in Osteoporotic Rats. 13:1604. 2020-01-01
Coupling of Anodic Oxidation and Soil Remediation Processes: A Review. 13:4309-4309. 2020-01-01
Densification of Bamboo: State of the Art. 13:4346. 2020-01-01
Dentin Microhardness and Sealer Bond Strength to Root Dentin are Affected by Using Bioactive Glasses as Intracanal Medication. 1:1-728. 2020-01-01
Development and Characterization of Titanium Dioxide Ceramic Substrates with High Dielectric Permittivities. 13:1-10. 2020-01-01
Development of Scheelite Tailings-Based Ceramic Formulations with the Potential to Manufacture Porcelain Tiles, Semi-Stoneware and Stoneware. 13:5122-5137. 2020-01-01
Dynamics of Bose-Einstein Condensates Subject to the Pöschl-Teller Potential through Numerical and Variational Solutions of the Gross-Pitaevskii Equation. 13:2236. 2020-01-01
Effect of Metal Content on Ethanol Decomposition over Ni-Co Catalysts Supported on La-Ce Oxides. 13:759-778. 2020-01-01
Effect of the Combination of Superabsorbent Polymers for Autogenous Shrinkage Control with Steel Fibers of High-Performance Concrete under Uniaxial Tension Using DIC. 13:4638. 2020-01-01
Effect of the Pulsed Electromagnetic Field (PEMF) on Dental Implants Stability: A Randomized Controlled Clinical Trial. 13:1667. 2020-01-01
Effects of Plastic Waste on the Heat-Induced Spalling Performance and Mechanical Properties of High Strength Concrete. 13:1-17. 2020-01-01
Effects of Surface Treatments of Glass Fiber-Reinforced Post on Bond Strength to Root Dentine: A Systematic Review. 13:1967. 2020-01-01
Electric-Field-Induced Phase Transformation and Frequency-Dependent Behavior of Bismuth Sodium Titanate-Barium Titanate. 13:1054. 2020-01-01
Enzyme Immobilization on Maghemite Nanoparticles with Improved Catalytic Activity: An Electrochemical Study for Xanthine. 13:1776. 2020-01-01
Evaluation of Bone Regeneration in Rat Calvaria Using Bone Autologous Micrografts and Xenografts: Histological and Histomorphometric Analysis. 13:4284. 2020-01-01
Evaluation of Internal and Superficial Self-Healing of Cracks in Concrete with Crystalline Admixtures. 13:1-18. 2020-01-01
Evaluation of Osteoconduction of a Synthetic Hydroxyapatite/β-Tricalcium Phosphate Block Fixed in Rabbit Mandibles. 13:4902-22. 2020-01-01
Evaluation of implants with different macrostructures in type I bone - Pre-clinical study in rabbits. 13:01-12. 2020-01-01
Evaluation of the Use of an Inorganic Bone Matrix in the Repair of Bone Defects in Rats Submitted to Experimental Alcoholism. 13:695-711. 2020-01-01
Expanding Puck and Schürmann inter fiber fracture criterion for fiber reinforced thermoplastic 3D-printed composite materials. 13:1653. 2020-01-01
Experimental Analysis of Space Trusses Using Spacers of Concrete with Steel Fiber and Sisal Fiber. 13:2305. 2020-01-01
Experimental and Numerical Analyses of the Failure of Prestressed Concrete Railway Sleepers. 13:1704-1. 2020-01-01
Fumonisin B1 Interaction with Mg-Al and Mg-Fe Layered Double Hydroxides: Removal Efficiency and Mechanisms. 13:4344. 2020-01-01
Highly Effective Fibrin Biopolymer Scaffold for Stem Cells Upgrading Bone Regeneration. 13:2747. 2020-01-01
Histological and Nanomechanical Properties of a New Nanometric Hydroxiapatite Implant Surface. An In Vivo Study in Diabetic Rats. 13:5693-5693. 2020-01-01
Histomorphometric, Immunohistochemical, Ultrastructural Characterization of a Nano-Hydroxyapatite/Beta-Tricalcium Phosphate Composite and a Bone Xenograft in Sub-Critical Size Bone Defect in Rat Calvaria. 13:4598. 2020-01-01
Impact of pyrolysis temperature on the properties of Eucalyptus wood-derived biochar. 13:1-14. 2020-01-01
In Situ and Ex Situ Characterization of the Microstructure Formation in Ni-Cr-Si Alloys during Rapid Solidification-Toward Alloy Design for Laser Additive Manufacturing. 13:2192. 2020-01-01
In Vitro Evaluation of Antibacterial Properties and Smear Layer Removal/Sealer Penetration of a Novel Silver-Citrate Root Canal Irrigant. 13:194. 2020-01-01
Influence of Carbon Nanotubes on the Mechanical Behavior and Porosity of Cement Pastes Prepared by A Dispersion on Cement Particles in Isopropanol Suspension. 13:3164. 2020-01-01
Influence of Different Stabilization Systems and Multiple Ultraviolet A (UVA) Aging/Recycling Steps on Physicochemical, Mechanical, Colorimetric, and Thermal-Oxidative Properties of ABS. 13:212. 2020-01-01
Influence of The Segregation Phenomenon on Structural Efficiency of Lightweight Aggregate Concretes. 13:5754. 2020-01-01
Influence of Wetting and Drying Cycles on Physical and Mechanical Behavior of Recycled Aggregate Concrete. 13:5675. 2020-01-01
Is There a Role for Absorbable Metals in Surgery? A Systematic Review and Meta-Analysis of Mg/Mg Alloy Based Implants. 13:1-22. 2020-01-01
Lanthanum Ferrites-Based Exsolved Perovskites as Fuel-Flexible Anode for Solid Oxide Fuel Cells. 13:3231. 2020-01-01
Laser Microtextured Surfaces for Friction Reduction: Does the Pattern Matter?. 13:4915. 2020-01-01
Laser Powder-Bed Fusion as an Alloy Development Tool: Parameter Selection for In-Situ Alloying Using Elemental Powders. 13:3922. 2020-01-01
Low-Carbon Concrete Based on Binary Biomass Ash-Silica Fume Binder to Produce Eco-Friendly Paving Blocks. 13:1534. 2020-01-01
MQL Strategies Applied in Ti-6Al-4V Alloy Milling-Comparative Analysis between Experimental Design and Artificial Neural Networks. 13:3828-3857. 2020-01-01
Magnetic Response Dependence of ZnO Based Thin Films on Ag Doping and Processing Architecture. 13:2907. 2020-01-01
Metal-Halogen Bonding Seen through the Eyes of Vibrational Spectroscopy. 13:55-55-23. 2020-01-01
Modulus and Strength of Concretes with Alternative Materials. 13:4378. 2020-01-01
Multi-Response Optimization in High-Speed Machining of Ti-6Al-4V Using TOPSIS-Fuzzy Integrated Approach. 13:1104. 2020-01-01
Nanocomposite Polymeric Materials Based on Eucalyptus Lignoboost® Kraft Lignin for Liquid Sensing Applications. 13:1637. 2020-01-01
Nanoliposomes composed by membrane lipid extracts from macrophage cell line as a delivery of the trypanocidal N, N?-Squaramide 17 towards Trypanosoma cruzi. 13:5505. 2020-01-01
Nitrogen-Enriched Cr1−xAlxN Multilayer-Like Coatings Manufactured by Dynamic Glancing Angle Direct Current Magnetron Sputtering. 13:3650. 2020-01-01
Non-Collagenous Dentin Protein Binding Sites Control Mineral Formation during the Biomineralisation Process in Radicular Dentin. 13:1053. 2020-01-01
Numerical Analysis of Bowing Phenomenon Due to Thermal Stresses in Marble Slabs. 13:4367. 2020-01-01
Optical and Electrochemical Applications of Li-Doped NiO Nanostructures Synthesized via Facile Microwave Technique. 13:2961. 2020-01-01
Patient-Specific Bone Multiscale Modelling, Fracture Simulation and Risk Analysis-A Survey. 13:106-65. 2020-01-01
Photocatalytic degradation of diclofenac using Al2O3-Nd2O3 binary oxides prepared by the sol-gel method. 13:1345. 2020-01-01
Physical Properties, Antimicrobial Activity and In Vivo Tissue Response to Apexit Plus. 13:1171. 2020-01-01
Physicochemical Properties and Cell Viability of Shrimp Chitosan Films as Affected by Film Casting Solvents. I-Potential Use as Wound Dressing. 13:5005-1023. 2020-01-01
Piezoelectric Properties of Pb1−xLax(Zr0.52Ti0.48)1−x/4O3 Thin Films Studied by In Situ X-ray Diffraction. 13:3338-3338. 2020-01-01
Portland cement/Acrocomia aculeata endocarp bricks: Thermal insulation and mechanical properties. 13:2081-2092. 2020-01-01
Preclinical In Vitro Assessment of Submicron-Scale Laser Surface Texturing on Ti6Al4V. 13:5342. 2020-01-01
Preparation and Characterization of Hemicellulose Films from Sugarcane Bagasse. 13:941-950. 2020-01-01
Process-related Changes in Polyetherimide Joined by Friction-based Injection Clinching Joining (F-ICJ). 13:1027. 2020-01-01
Pulsed Thermography Inspection of Composite Anticorrosive Coatings: Defect Detection and Analysis of Their Thermal Behavior through Computational Simulation. 13:4812-17. 2020-01-01
Quantum Memristors in Frequency-Entangled Optical Fields. 13:864. 2020-01-01
Red-Emitting Hybrid Based on Eu3+-dbm Complex Anchored on Silica Nanoparticles Surface by Carboxylic Acid for Biomarker Application. 13:5494. 2020-01-01
Reduced Graphene Oxide-Based Impedimetric Immunosensor for Detection of Enterotoxin A in Milk Samples. 13:1751. 2020-01-01
Resistive Switching in Electrodeposited Prussian Blue Layers. 13:5618. 2020-01-01
Role of the Plasma Activation Degree on Densification of Organosilicon Films. 13:25. 2020-01-01
Selection and Optimization of a K0.5Na0.5NbO3-Based Material for Environmentally-Friendly Magnetoelectric Composites. 13:731. 2020-01-01
Spin‐Glass Transitions in Zn1‐xFexO Nanoparticles. 13:1-15. 2020-01-01
Structure Quality of LuFeO3 Epitaxial Layers Grown by Pulsed-Laser Deposition on Sapphire/Pt. 13:61. 2020-01-01
Survival Probability, Weibull Characteristics, Stress Distribution, and Fractographic Analysis of Polymer-Infiltrated Ceramic Network Restorations Cemented on a Chairside Titanium Base: An In Vitro and In Silico Study. 13:1879. 2020-01-01
Synthesis of Mesoporous Zn1−xMxAl2O4 Substituted by Co2+ and Ni2+ Ions and Application in the Photodegradation of Rhodamine B. 13:2150. 2020-01-01
The Effect of Crystallographic Changes on Mechanical and Electrochemical Corrosion Properties of Duplex Stainless Steel Aged for Short Periods. 13:5511-5524. 2020-01-01
The Effect of Polarity and Hydrostatic Pressure on Operational Characteristics of Rutile Electrode in Underwater Welding. 13:5001. 2020-01-01
The Effect of ZnO on the Failure of PET by Environmental Stress Cracking. 13:2844-2854. 2020-01-01
The Influence of Alternative Fillers on the Adhesive Properties of Mastics Fabricated with Red Mud. 13:1-15. 2020-01-01
The Influence of the Welding Process on the Ultrasonic Inspection of 9%Ni Steel Pipe Circumferential Welded Joints. 13:961. 2020-01-01
The Potential of CEB Reinforced Masonry Technology for (Re)construction in the Context of Disasters. 13:3861. 2020-01-01
Tribological Investigations on Tool Surfaces for Temperature-Supported Forming of Magnesium AZ31 Sheets. 13:2465. 2020-01-01
Using BiVO4/CuO-Based Photoelectrocatalyzer for 4-Nitrophenol Degradation. 13:1322. 2020-01-01
VEGF/VEGF-R/RUNX2 Upregulation in Human Periodontal Ligament Stem Cells Seeded on Dual Acid Etched Titanium Disk. 13:706. 2020-01-01
Welding Joints in High Entropy Alloys: A Short-Review on Recent Trends. 13:1411. 2020-01-01
Zein-layered hydroxide biohybrids: strategies of synthesis and characterization. 13:825. 2020-01-01

tem uma área de assunto

publisher

MDPI

is open access

True invalid format

is in DOAJ

True invalid format