JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (IMPRESSO)

publicação venue de

A detailed implementation of multithreading and out-of-core computation to the conventional boundary element algorithm with minimum code changes. 45:1-14. 2023-01-01
A finite element analysis of multiphase conjugated flow in diesel and biodiesel-driven engine filtration device. 45:1-20. 2023-01-01
A new measurement technique for monitoring inorganic scale deposition. 45:438-451. 2023-01-01
A practical technique to assess the influence of the misalignment angle of unidirectional composite fibers under compressive load. 45:245-257. 2023-01-01
A proposal for the optimization of the geometric configuration of a hollow cylindrical steel damper with slots. 45:152. 2023-01-01
A robotic passive vision system for texture analysis in weld beads. 45:1. 2023-01-01
A simplified analytical method for the computation of machine path in filament winding of axisymmetric structures: a case study on a bell-contoured rocket nozzle extension. 45:284. 2023-01-01
A systematic approach to find the hyperparameters of artificial neural networks applied to damage detection in composite materials. 45:496. 2023-01-01
A systematic review on the engineering properties of concrete with carbon nanotubes. 45:205. 2023-01-01
Acoustoelasticity to measure residual stresses in plates of 5052 aluminum joined by FSW. 45:82. 2023-01-01
Aeroelastic energy harvesting in flutter condition increases with combined nonlinear stiffness and nonlinear piezoelectrical coupling. 45:1. 2023-01-01
An alternating active-phase algorithm for multi-material topology optimization. 45:27. 2023-01-01
An enhanced approach for damage detection using the electromechanical impedance with temperature effects compensation. 45:1-17. 2023-01-01
An investigation about stresses and processed zone around crack tip in CFRP plates. 45:255. 2023-01-01
An investigation on the kinetic behavior and thermodynamic parameters of the oxy-fuel combustion of Brazilian agroindustrial residues. 45:1-18. 2023-01-01
Analysis of the solid wire dip in the GMAW-CMT melting pool as a means for enhancing additive manufacturing. 45:01-09. 2023-01-01
Analysis of the spring-back and water effect on the coring point during direct extrusion. 45:105. 2023-01-01
Application of a multi-objective genetic optimization algorithm for the thermodynamic optimization of reed valves. 45:83. 2023-01-01
Application of elliptic-blending turbulence models to the flow separation over a 6:1 prolate spheroid at incidence. 45:1-19. 2023-01-01
Application of random matrix theory combined with the singular value decomposition to journal bearings uncertainty analysis. 45:213. 2023-01-01
Application of the stiffness method to the optimization analysis of a marine propulsion shaft system. 45:1/116-12. 2023-01-01
Applying a multivariable and adaptive control to a turbocharger test bench. 45:1-13. 2023-01-01
Assessment of EqP in XFEM for weak discontinuities. 45:1-23. 2023-01-01
Automatic inspection system of adhesive on vehicle windshield using computational vision. 45:1-15. 2023-01-01
CFD evaluation of the influence of the draft tube on solids circulation in conical spouted beds. 45:462. 2023-01-01
Changes in the mechanical performance of an ortho-planar spring after aging tests. 45:118. 2023-01-01
Characterization of compact heat exchangers manufactured by laser powder bed fusion technology. 45:1-17. 2023-01-01
Closed-loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. 45:140. 2023-01-01
Comparative analysis of unsteady friction models for pipe flows in light of the second law of thermodynamics. 45:107. 2023-01-01
Control and identification of parameters of a joint of a manipulator based on PID, PID 2-DOF, and least squares. 45:1-12. 2023-01-01
Control of airflow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. 45:334. 2023-01-01
Development of a heating system and the effect of temperature in the twin-disc test. 45:1-17. 2023-01-01
Development of sustainable foamed alkali-activated materials for modular construction. 45:1-12. 2023-01-01
Diamond grinding wheel wear characterization after finishing cemented tungsten carbide cutting inserts. 45:1. 2023-01-01
Dimensional synthesis of rack-and-pinion steering mechanism using a novel synthesis equation. 45:411. 2023-01-01
Dimensionless models of representative parameters of the spray obtained from effervescent atomizers. 45:1-11. 2023-01-01
Drag coefficient on particle agglomerates: a CFD study with experimental validation. 45:473. 2023-01-01
Effect of reaming on surface properties of self-lubricating composites. 45:1-14. 2023-01-01
Exergy, economic and environmental assessment of a hybrid solar-biomass cogeneration plant applied to the corn ethanol industry. 45:1-13. 2023-01-01
Experimental investigation of the structural performance of fiber-reinforced patches in the repair of locally damaged steel pipes. 45:435. 2023-01-01
Experimental observation of ethanol-air premixed flames propagating inside a closed tube with high aspect ratio. 45:80. 2023-01-01
Experimental study on the heat transfer and pressure drop of oil-based nanofluids in laminar flow inside horizontal tubes. 45:1-488. 2023-01-01
Fatigue life assessment for incremental innovation of novel O&G equipment using a calibrated finite element and Monte Carlo samplings. 00:00-XX. 2023-01-01
Feasibility of replacing diesel with ethanol blended with biodiesel and diethyl-ether blends in a compression ignition engine. 45:60. 2023-01-01
Finite element simulation and experimental validation of the variations of temperature and moisture content in unsteady-state drying of corn in a fixed bed. 45:1-13. 2023-01-01
Flexural behavior of PVA and PP fiber-reinforced concrete under cyclic loading. 45:472. 2023-01-01
Flutter analysis including structural uncertainties using a relaxed LMI-based approach. 45:1-10. 2023-01-01
Heat transfer simulation in an industrial furnace firing natural gas and pure oxygen for production of ceramic frits. 45:150. 2023-01-01
ISHM for fault condition detection in rotating machines with deep learning models. 45:1-10. 2023-01-01
Ignition delay time correlations for $$ extrm{C}_1- extrm{C}_4$$ primary alcohols: a multivariate and automatized approach. 45:397. 2023-01-01
In-flight modal identification by operational modal analysis. 45:278. 2023-01-01
Influence of abrasive deburring in indirect tool wear measurement in micromilling of Inconel 718. 45:262. 2023-01-01
Investigation of a submerged oscillating heat exchanger. 45:1. 2023-01-01
Investigation of the stability of a planar Oldroyd-B jet. 45:251. 2023-01-01
Investigation of the synergistic effect of materials and geometry on stress distribution in brittle adhesive joints submitted to lap-shear test. 45:273. 2023-01-01
Large deformation analysis of functionally graded thermoviscoplastic beams under ductile damage via finite elements. 45:461. 2023-01-01
Low-pressure axial fan blade pitch angle optimization based on a first-principles model. 45:144. 2023-01-01
Low-pressure system adjustment based on aircraft cruise thrust. 45:1-22. 2023-01-01
Methodology for inerting system analysis in the long-range aircraft preliminary design phase. 45:91-105. 2023-01-01
Methodology to analyse carbon fibre/epoxy composite pressure vessel based on finite element modelling and classical laminated theory. 45:1-9. 2023-01-01
Monitoring the operational condition of a diesel engine by evaluating the parameters of its thermodynamic operation cycle. 1:1-15. 2023-01-01
Multiscale structural analysis of oil rig mast using mean fields and finite element method. 45:20. 2023-01-01
Nanolubricants in refrigeration systems: a state-of-the-art review and latest developments. 45:1. 2023-01-01
Novel approach for evaluating the performance of wax deposition inhibitors under flowing conditions. 45:249-261. 2023-01-01
Numerical and experimental analysis of SAE 1010 thin steel sheets formability with and without galvanizing (GI-85). 45:101. 2023-01-01
Numerical formulation for advanced non-linear static analysis of semi-rigid planar steel frames. 45:1-26. 2023-01-01
Numerical simulation and parametric study of pile groups under lateral loads. 45:364. 2023-01-01
Numerical simulation of bluff body turbulent flows using hybrid RANS/LES turbulence models. 45:217. 2023-01-01
Numerical study of homogeneous pre-chamber design in an ethanol-fueled vehicular engine. 45:70. 2023-01-01
On the use of the Gaussian mixture model and the Mahalanobis distance for fault diagnosis in dynamic components of electric motors. 1:1-15. 2023-01-01
Optimal selection of utility plants in oil and gas offshore platforms. 45:1-12. 2023-01-01
Piezoelectric energy harvesting in graded elastic metastructures using continuous and segmented electrodes. 45:1-12. 2023-01-01
Population evaluation of the adapted particle swarm optimization algorithm applied for control in view of unknown parameter changes in the system. 45:1-18. 2023-01-01
Power curve performance of coastal turbines subject to low turbulence intensity offshore winds. 45:1-17. 2023-01-01
Practical applications for nonlinear system identification using discrete-time Volterra series. 45:1-12. 2023-01-01
Sandwich panels made of aluminium skins and gapped-bamboo ring core. 45:1. 2023-01-01
Second-order Krylov subspaces for model order reduction of buildings subjected to seismic excitation. 45:110. 2023-01-01
Solving propeller optimization problems by using helical vortex and exact penalty methods. 45:374. 2023-01-01
Statistical analysis of the uniformity of sprays of tire pyrolysis oil-diesel oil blends. 45:168-16. 2023-01-01
Statistical modes method-SMM for vibroacoustics calculations of coupled systems. 45:2. 2023-01-01
Stochastic efficient global optimization with high noise variance and mixed design variables. 45:7. 2023-01-01
Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. 1:1-10. 2023-01-01
Surface roughness analysis in finishing end milling of Hardox® 450 steel using multilayer graphene-based nanofluid. 45:147. 2023-01-01
The Effect of Fiber Orientation on Creep Behavior of Sisal/ Epoxy Composites. 45:258. 2023-01-01
The simplified $$k-epsilon $$ turbulence model applied to numerical simulation of the stable atmospheric boundary layer. 45:45-84. 2023-01-01
The solution of the wave-diffusion equation by a caputo derivative-based finite element method formulation. 45:261. 2023-01-01
Thermomechanical analysis of polypropylene in tensile tests. 45:1. 2023-01-01
Transient experimental analysis in the wake of bluff bodies. 45:1-15. 2023-01-01
Using twin disc for applications in the railway: a systematic review. 45:01/191. 2023-01-01
Validation of a low-cost IMU for flow-induced vibration tracking in offshore systems. 45:356. 2023-01-01
Viscosity ratio effects on fluid displacement pattern and recovery efficiency on porous media. 45:149. 2023-01-01
Viscous liquid recovery by injection of Newtonian and viscoelastic materials in a sand porous media. 45:449. 2023-01-01
Vision-based measurement for quality control inspection in the context of Industry 4.0: a comprehensive review and design challenges. 45:229. 2023-01-01
3D printing of trabecular bone-mimetic structures by vat photopolymerization of bovine hydroxyapatite as a potential candidate for scaffolds. 44:1-12. 2022-01-01
A CSP-desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. 44:154-1. 2022-01-01
A General framework for finite strain elastoplastic models: a theoretical approach. 44:1-17. 2022-01-01
A Lagrangian roughness model integrated with the vortex method for drag coefficient estimation and flow control investigations around circular cylinder for a wide range of Reynolds numbers. 44:331. 2022-01-01
A comparative study of strength reduction and gravity increase methods considering random fields in slope stability analysis. 44:539. 2022-01-01
A comparison of the rheological behavior of xanthan gum and diutan gum aqueous solutions. 44:117. 2022-01-01
A comparison of the structural integrity of steam generator tubes based on deterministic and probabilistic crack acceptance criteria. 44:1-8. 2022-01-01
A discussion on damage identification in parametrically excited vertical rods. 44:35. 2022-01-01
A framework for numerical and experimental correlation of mode shapes with low spatial resolution: a catamaran?s case study. 44:1-15. 2022-01-01
A large strain one-dimensional ductile damage model for space truss analysis considering Gurson?s porous plasticity, thermal effects and mixed hardening. 44:186. 2022-01-01
A local meshless numeric method applied in free and forced vibration analyses for elastic problems. 44:1-15. 2022-01-01
A low-cost methodology for quality inspection of metal additive manufactured parts. 44:293. 2022-01-01
A methodology based on empirical mode decomposition and synchrosqueezed wavelet transform for modal properties identification and damage detection. 44:501. 2022-01-01
A new approach to suppressing the Sommerfeld effect in vibrating structures. 44:1. 2022-01-01
A novel design-point computational program for thermal power plants applications: energy, exergy and economic (3E) analysis. 44:1-24. 2022-01-01
A numerical study on preferential diffusion effects in coflowing laminar reacting jets. 44:12. 2022-01-01
A technique to improve the design of near-zero energy buildings. 44:228. 2022-01-01
A three-dimensional model to predict acid treatment processes and its application in complex well-reservoir coupled problems. 44:381-382. 2022-01-01
A unified formulation for composite quasi-3D elements based on global-local superposition-part I: element formulation. 44:504. 2022-01-01
A unified formulation for composite quasi-3D elements based on global-local superposition. Part II: Implementation and numerical assessment. 44:531. 2022-01-01
A vectorized assembly-free FEM solver for image-based numerical homogenization. 44:343. 2022-01-01
Accurate trajectory tracking control with adaptive neural networks for omnidirectional mobile robots subject to unmodeled dynamics. 45:48. 2022-01-01
Acquiring reliable boundary conditions for three-dimensional simulation of internal combustion engines by means of one-dimensional simulation: an insight on pre chamber design. 44:528. 2022-01-01
Amplification factor for simplified sway estimate by the γz coefficient. 44:582. 2022-01-01
An adaptive framework applied to structural health monitoring and damage-tolerant active control of smart structures. 44:555. 2022-01-01
An analysis of the surface roughness of Ti-15Mo alloy machined with uncoated cemented tungsten carbide cutting inserts with different geometries. 44:309-318. 2022-01-01
An approach of pondered individual analysis method in aircraft control. 44:534-105. 2022-01-01
An improved immersed boundary method by coupling of the multi-direct forcing and Fourier pseudo-spectral methods. 44:1-22. 2022-01-01
An optimizationless stochastic volterra series approach for nonlinear model identification. 44:1-8. 2022-01-01
An overview on the use of unmanned aerial vehicles for medical product transportation: flight dynamics and vibration issues. 44:1-18. 2022-01-01
Analysis of the naphthenic acids corrosion in a vacuum distillation tower of the Brazilian national oil refinery system. 44:1-11. 2022-01-01
Application of a nano-incremental step loading (N-ISL) in a Ni-base superalloy under a hydrogen charging environment. 44:1-13. 2022-01-01
Assessment of the two-dimensional liquid film approach in an inclined plate. 44:-. 2022-01-01
Asymptotic matching arguments and DNS for transpired turbulent flows. 44:415. 2022-01-01
Bend stiffener material estimation in full-scale bending-tension tests considering various loading conditions. 44:1-16. 2022-01-01
Chaos analysis of a single-bay flutter panel. 44:21. 2022-01-01
Characterization of long bamboo Guadua Angustifolia fibre composite extracted via rotary-peeling method. 44:1-16. 2022-01-01
Characterizing water-on-deck propagation with a nonlinear advection-diffusion equation. 44:417. 2022-01-01
Closed-form solutions for wave-induced poroelastic response in seabed under dynamic and quasi-static regimes. 44:16. 2022-01-01
Coating weld cavitation erosion resistance using austenitic stainless steel and cobalt alloys deposited by GMAW and CW-GMAW. 44:568. 2022-01-01
Combustion characterization of commercial ethanol fuels in an optical research SI ignition engine for different injection strategies. 44:232-13. 2022-01-01
Comparative study of arterial wall models for numerical fluid-structure interaction simulation of aortic arch aneurysms. 44:1-14. 2022-01-01
Comparative study of tuning techniques for fractional PID controllers for FOPDT systems. 44:212. 2022-01-01
Comparison between two heat source models for wire-arc additive manufacturing using GMAW process. 44:7. 2022-01-01
Comparison of PIV measurements and OpenFOAM simulations of a stirred tank: study of the azimuthal position effect. 44:421-437. 2022-01-01
Complete geometric representation of yield surfaces for porous ductile media by a 3D computational homogenization approach: an assessment of the Gurson yield criterion. 44:1/163-17. 2022-01-01
Concept, modeling and experimental evaluation of an integrated cooling, heating and thermoelectric generation system. 44:481. 2022-01-01
Controlled addition of air in the gas mixture of plasma nitriding: an analysis of nitrided layer microstructure and microhardness of carbon steels. 44:1-12. 2022-01-01
Cylinder deactivation strategy for fuel consumption reduction. 44:1-15. 2022-01-01
Damping effect on nonlinear drum brake squeal prediction. 44:4497-12. 2022-01-01
Design of triple-beam internal-impact piezoelectric harvester optimized for energy and bandwidth. 44:1-2. 2022-01-01
Design optimization methodology of small horizontal axis wind turbine blades using a hybrid CFD/BEM/GA approach. 44:254. 2022-01-01
Design, aerodynamic analysis and optimization of a next-generation commercial airliner. 44:1-22. 2022-01-01
Development of a computer vision-based system for part referencing in CNC machining centers. 44:1-14. 2022-01-01
Development of a thermal error compensation system for a CNC machine using a radial basis function neural network. 44:1-21. 2022-01-01
Development of an evolutionary artificial neural network-based tool for selecting suitable enhanced oil recovery methods. 44:121. 2022-01-01
Double fictitious background media formulation for the Helmholtz equation in inhomogeneous media. 44:63-78. 2022-01-01
Dynamic modeling and control of a spherical pendulum with a VSCMG. 44:1-14. 2022-01-01
Ecological efficiency of renewable and non-renewable energy generation power systems considering life cycle assessment. 44:546. 2022-01-01
Effect of hybrid manufacturing (am-machining) on the residual stress and pitting corrosion resistance of 316L stainless steel. 44:1-16. 2022-01-01
Effect of viscoelasticity on oil displacement in a microfluidic porous medium. 44:10-20. 2022-01-01
Efficiency and NOx emission optimization by genetic algorithm of a coal-fired steam generator modeled with artificial neural networks. 44:1. 2022-01-01
Estimation of fatigue life under random multiaxial conditions using the projection-by-projection method. 44:569-570. 2022-01-01
Evaluation of surface roughness in the incremental forming process with variation in the degrees of freedom of the contact tool. 44:1-10. 2022-01-01
Experimental analysis between performance parameters for an internal combustion engine fueled by gasoline and ethanol when submitted to engine block vibration. 44:314. 2022-01-01
Experimental and kinetic modeling studies of laminar flame speed of n-butanol/ethanol blends. 44:222. 2022-01-01
Experimental parametric analysis of biodiesel synthesis in microreactors using waste cooking oil (WCO) in ethilic route. 44:1-179. 2022-01-01
Experimental thermodynamic analysis of automotive turbochargers using fluid film bearings with different groove shapes. 44:297. 2022-01-01
Failure criterion for SPIF based on mean stress. 44:193. 2022-01-01
Fatigue and microhardness of 6201 wire of overhead conductor. 44:1-13. 2022-01-01
Fatigue crack propagation of an AA2198 aeronautic alloy using a stochastic model. 44:515. 2022-01-01
Fault detection using vibration data-driven models-a simple and well-controlled experimental example. 44:229-240. 2022-01-01
Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehicles. 44:1-22. 2022-01-01
Feature analysis by k-means clustering for damage assessment in rotating machinery with rolling bearings. 44:1-14. 2022-01-01
Finite element model of oil well cement curing process in the presence of fluid loss zone. 44:551. 2022-01-01
Finite element modeling for biomechanical validation of three-dimensional digital surgical planning in periacetabular osteotomy. 44:1/284-10. 2022-01-01
Frozen core-annular flow model for effervescent atomizer. 44:452. 2022-01-01
Heat transfer enhancement of two-phase droplet flow in microtube: a phase-field simulation study. 44:1. 2022-01-01
Helicopter Engine Simulation using Flight Test Data. 44:1/(2022) 44:512-23. 2022-01-01
Heuristical dimensional optimization of continuum structures for additive manufacturing based on beam sizing concepts. 44:1-11. 2022-01-01
Hybrid optimization algorithm for preliminary design of multistage launch vehicles. 44:1-124. 2022-01-01
Hybrid-electric airplane design optimization considering climb and cruise phases. 44:41. 2022-01-01
Hydrodynamic loading effects on the fatigue behavior of gravity-based offshore wind turbine foundations in Brazilian waters. 44:509-534. 2022-01-01
Impact of diamond tool wear on the surface finish of lithium silicate glass ceramics machined with the assistance of CAD/CAM systems. 45:1-12. 2022-01-01
Inaccuracy in arc power calculation through a product of voltage and current averages. 44:11. 2022-01-01
Influence of standard $$k-arepsilon$$, SST $$kappa -omega$$ and LES turbulence models on the numerical assessment of a suspension bridge deck aerodynamic behavior. 44:1-15. 2022-01-01
Influence of the single-screw extruder nozzle diameter on pellet-based filaments for additive manufacturing. 44:286-297. 2022-01-01
Influence of thrust modulation on a satellite with flexible non-latching booms. 44:1-13. 2022-01-01
Inverse analysis applying the Levenberg-Marquardt method for simultaneously estimating parameters of the adsorption of CO2 on activated carbon in a fixed-bed adsorber. 44:460. 2022-01-01
Investigation of HVOF-sprayed WC- and NiCr-based coatings to improve corrosion and wear performance of high-strength steel. 44:95. 2022-01-01
Investment decision of photovoltaic projects based on stochastic modelling of solar irradiation and shortfall penalties foreseen in centralized-generation auction?s contracts. 44:608. 2022-01-01
Inviscid hydrodynamic instability analysis of H2-O2 subsonic coaxial jets. 44:403. 2022-01-01
Layout optimization of transmission line family structures. 44:1. 2022-01-01
Local averaged stratified sampling method. 44:294. 2022-01-01
Low-cost solar still with corrugated absorber basin for water desalination. 44:1-12. 2022-01-01
Magnetic field-assisted finishing processes: from bibliometric analysis to future trends. 44:1-17. 2022-01-01
Mechanical behavior of skeletal muscles under simple shear at large strain. 44:511-xx. 2022-01-01
Mechanical characterization of single- and multiple-batch solid propellants using digital image correlation method. 1:1-37. 2022-01-01
Metallurgical, strength and toughness evaluation on F22 steel welding with ER80S-G and nickel-based filler metals. 44:1-10. 2022-01-01
Modeling of hydrodynamic bearings with a novel boundary parameterization approach. 44:171. 2022-01-01
Multi-phase fluid-structure interaction using adaptive mesh refinement and immersed boundary method. 44:1-14. 2022-01-01
Multiaxial fatigue of 304L stainless steel notched member. 44:391. 2022-01-01
Neural networks to classify atmospheric turbulence from flight test data: an optimization of input parameters for a generic model. 44:82. 2022-01-01
Nonlinear buckling behavior and stress and strain analyses of atmospheric storage tank aided by laser scan dimensional inspection technique. 44:443-458. 2022-01-01
Nonlinear eigenvalue problem approach for mass transfer in supported liquid membrane co‐transport separation processes. 1:1-10. 2022-01-01
Nonlinear vibration analysis of a partially filled multi-layer cylindrical tank: consideration of the sloshing effects in the fluid-structure interaction. 44:484. 2022-01-01
Numerical Analysis of brain artery in ANSYS. 44:513. 2022-01-01
Online Near Infrared Spectroscopy for Automatic Polymeric Material Identification. 44:1-10. 2022-01-01
Optimal coordination strategy to form and dissolve truck platoons on a highway stretch. 44:1-16. 2022-01-01
Optimal earth-moon trajectories in elliptic models: part 2 transfer between elliptic low earth orbit to elliptic low moon orbit. 44:217. 2022-01-01
Optimization of NREL phase VI wind turbine by introducing blade sweep, using CFD integrated with genetic algorithms. 44:52. 2022-01-01
Optimization of operating conditions of the Fischer-Tropsch synthesis based on multi-objective differential evolution algorithm. 44:409-504. 2022-01-01
Parameter optimization in the friction stir welding of polycarbonate using cylindrical and conical tool pins. 44:307-10. 2022-01-01
Parametric determination of fuel consumption during cruise flight for fuel cell powered airplanes. 44:1-10. 2022-01-01
Performance analysis of nanofluid-based water desalination system using integrated solar still, flat plate and parabolic trough collectors. 44:427. 2022-01-01
Perturbation rejection and active fall recovery for biped robots based on the capture point dynamics. 44:95. 2022-01-01
Premixed flame heat release-based optimum global single-step chemistry for H$$_2$$, CH$$_4$$, and C$$_3$$H$$_8$$ mixtures with air. 44:131. 2022-01-01
Probabilistic dipole BEM model for cohesive crack propagation analysis. 44:1. 2022-01-01
Proposal of a numerical and experimental methodology for simultaneous determination of thermal properties and internal surface temperature: experimental validation using a polyvinyl chloride flat plate. 44:1-10. 2022-01-01
Reducing the discretization error for a poroelasticity problem in variables having extreme values. 44:1/147-11. 2022-01-01
Relations between solutions of the Zorawski condition and Motions With Constant Stretch History. 44:1-5. 2022-01-01
Residual stresses in weld bead of low carbon steel plates welded by GMAW using LCR waves. 44:290. 2022-01-01
Semi-empirical correlations for predicting hot gas layer temperature in pre-flashover compartment fires considering fire source location. 44:1-16. 2022-01-01
Shape effects on airfoils induced by riveting. 44:285-294. 2022-01-01
Structural reliability analysis of redundant systems considering global structural responses and using Kriging surrogate models. 44:140. 2022-01-01
Study on the influence of operational conditions on weld bead morphology produced through TIG process with longitudinal wire oscillation. 44:292. 2022-01-01
Temperature profile and gas emissions of jet fuel using a low power flameless combustor. 44:1-13. 2022-01-01
The Finite Element Method applied in the viscoelastic constitutive model of Kelvin-Voigt for characterization of the soil dynamic response to water leakage simulation. 44:1-14. 2022-01-01
The effect of the environment humidity on the performance of an oscillating water column wave energy converter. 44:1. 2022-01-01
The impact of building energy codes evolution on the residential thermal demand. 44:588. 2022-01-01
The importance of pseudo-polytropic analysis for supercritical CO2 turbomachinery and power systems. 44:549. 2022-01-01
The solution of the anomalous diffusion equation by a finite element method formulation based on the Caputo derivative. 44:250-58. 2022-01-01
The use of Hurst exponent in impedance-based structural health monitoring. 44:1-15. 2022-01-01
Thermal analysis of hypersonic reactive flows on the SARA Brazilian satellite reentry trajectory. 44:1-20. 2022-01-01
Thermal behavior estimation of a solar wall operated by TiO2 nanofluids using several machine learning models. 44:128. 2022-01-01
Three-Dimensional Turbulent Flow Investigation of a High-Pressure Turbine with Rotor Tip Desensitization Based on Winglet Geometry. 44:1-14. 2022-01-01
Toward the use of bond graphs for manufacturing control: improving existing models. 44:1. 2022-01-01
Tribological properties of bio-based lubricant basestock obtained from pequi oil (Caryocar brasiliensis). 44:44-51. 2022-01-01
Validation and analysis of turbulence modeling in pipe elbow under secondary flow conditions. 44:1-1. 2022-01-01
Well integrity assessment under uncertainty considerations and evaluation of the workover frequency impact. 44:1-16. 2022-01-01
3D numerical simulation of real-time temperature field in a hyperthermia cancer treatment using OcTree meshes. 43:1-23. 2021-01-01
A comparative numerical study of scramjet intake systems. 43:534. 2021-01-01
A computational approach to the powered Swing-By in the elliptic restricted problem. 43:186. 2021-01-01
A critical plane criterion to multiaxial fatigue of metals containing small defects. 43:517. 2021-01-01
A longitudinal study of a lateral intracranial aneurysm: identifying the hemodynamic parameters behind its inception and growth using computational fluid dynamics. 43:1-14. 2021-01-01
A low‑frequency sound absorber based on micro‑slit and coiled cavity. 124:1-9. 2021-01-01
A methodology to estimate the remaining residual life of components of processes subjected to corrosion using the extreme value theory combined with the first-order reliability method. 43:1. 2021-01-01
A methodology to obtain the performance curves of windmills associated with piston pumps: application in water desalination systems by reverse osmosis. 43:322-336. 2021-01-01
A modal approach for designing controllers for active flutter suppression. 43:35. 2021-01-01
A neural network-based inversion method of a feedback linearization controller applied to a hydraulic actuator. 43:248. 2021-01-01
A new data normalization approach applied to the electromechanical impedance method using adaptive neuro-fuzzy inference system. 43:1-13. 2021-01-01
A new model to prevent failures in gas turbine engines based on TSFRESH, self-organized direction aware data partitioning algorithm and machine learning techniques. 43:261. 2021-01-01
A nonlinear geometric model for pre-stressed steel-concrete composite beams. 43:1-15. 2021-01-01
A poroelastic simulator with hydraulic fracture propagation using cohesive finite elements. 43:175-175. 2021-01-01
A review of dual-fuel combustion mode in spark-ignition engines. 43:426. 2021-01-01
A review of the relationship between design factors and environmental agents regarding adhesive bonded joints. 43:389. 2021-01-01
A simplified $$k-epsilon$$ turbulence model. 43:384. 2021-01-01
A simplified model for fluid-structure interaction: a cylinder tethered by springs in a lid-driven cavity flow. 43:504. 2021-01-01
A study on the computational effort of hyper-dual numbers to evaluate derivatives in geometrically nonlinear hyperelastic trusses. 43:1-1. 2021-01-01
A well simulator for homogeneous reservoirs based on formulations of the isogeometric boundary element method. 43:206-40430. 2021-01-01
All-optical real-time monitoring of air/vacuum valves in water pipeline systems using fiber Bragg gratings. 44:1-7. 2021-01-01
An adaptive orbital system based on laser vision sensor for pipeline GMAW welding. 43:1-17. 2021-01-01
An algorithm to minimize errors in displacement measurements via double integration of noisy acceleration signals. 43:385. 2021-01-01
An experimental study of refrigerant expansion inside coiled adiabatic capillary tubes and development of a general correlation. 43:1-1. 2021-01-01
An intelligent hexapod robot for inspection of airframe components oriented by deep learning technique. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 43:1-15. 2021-01-01
Analysis and verification of the social forces model in pedestrian lane formation scenarios. 43:1/287-15. 2021-01-01
Analysis of residual stresses in rails during the straightening process. 43:1-12. 2021-01-01
Analysis of temperature and surface finish of Inconel 718 during grinding utilizing different grinding wheels. 43:1-12. 2021-01-01
Analysis of the pre-straining effects on the limit strains of interstitial-free steel: experiments and elasto-plastic modeling of strain and stress-based forming limit curves. 43:1-110. 2021-01-01
Analysis of wake velocities and pressure fluctuations in a bistable flow using Hilbert-Huang transform and wavelets. 43:65. 2021-01-01
Analysis of wind turbine blade aerodynamic optimization strategies considering surface degradation. 43:460. 2021-01-01
Analytical- numerical modeling of journal bearings with non-Newtonian fluids and cavitation effects. 43:525. 2021-01-01
Anintelligent hexapod robot for inspection of airframe components oriented by deep learning technique. 43:1-15. 2021-01-01
Application of H&S and UFS models for a parametric analysis of the exergoeconomic variables of an organic Rankine cycle-vapor-compression refrigeration system. 43:518. 2021-01-01
Application of an exact integral transform formulation for temperature estimation in solid-state electronics. 43:203. 2021-01-01
Assessing subfilter-scale turbulence-radiation interaction in a large-scale ethanol pool fire. 43:293. 2021-01-01
Assessment of power modulation formats on penetration depth for laser welding. 43:286-12. 2021-01-01
Asset management strategies using reliability, availability, and maintainability (RAM) analysis. 43:43:495. 2021-01-01
Autoregressive model extrapolation using cubic splines for damage progression analysis. 43:1-15. 2021-01-01
Bayesian estimation of the size distribution of air bubbles in water. 43:1-13. 2021-01-01
Broadband vibration attenuation from a one-dimensional acoustic black hole resonator for plate-on-plate structures. 43:442. 2021-01-01
Certification of linear closed-loop controllers using the $$ u $$-gap metric and the generalized stability margin. 43:366. 2021-01-01
Comparative analysis of vehicle turbochargers in energy microgeneration for different compoundings. 43:14. 2021-01-01
Comparative study of a tropical-climate natural-convection hybrid PV/T system operating with full or partial (tube-only) water coil insulation and two different sizes of thermal energy reservoirs. 43:301-13. 2021-01-01
Comparison between the machinability of different titanium alloys (Ti-6Al-4V and Ti-6Al-7Nb) employing the multi-objective optimization. 43:1-12. 2021-01-01
Correction to: Non-intrusive, real-time deep learning-based pollution analysis applied to open-channels. 43:446. 2021-01-01
Could an absorption refrigeration system be driven by the engine exhaust gas and cooling fluid of a minibus?. 43:544. 2021-01-01
Degradation of castable refractory in a fluidized catalytic cracking unit of a Brazilian oil refinery: a case study. 43:1-551. 2021-01-01
Denoising convolutional autoencoder configuration for condition monitoring of rotating machines. 43:53. 2021-01-01
Design and numerical evaluation of quadrotor drone frame suitable for fabrication using fused filament fabrication with consumer-grade ABS. 43:436. 2021-01-01
Design for assistive technology oriented to design methodology: a systematic review on user-centered design and 3D printing approaches. 43:483. 2021-01-01
Design of bladeless impellers for abrasive fluid pumping. 43:10. 2021-01-01
Development of a flexible rehabilitation system for bedridden patients. 43:1-19. 2021-01-01
Development of a force actuator for hybrid model tests using super-twisting sliding mode control. 43:271. 2021-01-01
Diffusive terms applied in smoothed particle hydrodynamics simulations of incompressible and isothermal Newtonian fluid flows. 43:1/479-22. 2021-01-01
Discrete model to estimate nucleate boiling heat transfer coefficient with gasoline using a double-log-normal distribution function. 44:1. 2021-01-01
Diverter damper force analysis and stress intensity factors for its double fillet welds by boundary element method. 43:1-10. 2021-01-01
Dynamic analysis of onshore wind turbines including soil-structure interaction. 43:1-17. 2021-01-01
Effect of bearing dissipative torques on the dynamic behavior of H-Darrieus wind turbines. 43:410. 2021-01-01
Effect of staggered V-shaped and rectangular grooves copper surfaces on pool boiling heat transfer enhancement using ZrO2 nanofluids. 43:75. 2021-01-01
Effect of the test conditions on tribological behavior of an Nb-stabilized AISI 430 stainless steel sheet. 43:1-12. 2021-01-01
Effects of surface roughness and wall confinement on bluff body aerodynamics at large-gap regime. 43:397. 2021-01-01
Effects of the infeed method on thread turning of AISI 304L stainless steel. 43:253. 2021-01-01
Effects of the main zonal harmonics on optimal low-thrust limited-power transfers. 43:1-24. 2021-01-01
Electric vehicle battery-ultracapacitor hybrid energy storage system and drivetrain optimization for a real-world urban driving scenario. 43:259. 2021-01-01
Energy exchange in a bi-flux diffusion process consisting of particles of the same nature split into two distinct microstates. 43:457. 2021-01-01
Energy, exergy and exergoenvironmental (3E) analyses of power plant integrated with heliostats solar field. 43:01/184-12. 2021-01-01
Evaluating mechanical properties of a photosensitive acrylic resin for additive manufacturing with the addition of organophilic clays. 43:96. 2021-01-01
Experimental study of thermophysical properties of MWCNT and graphene coolant nanofluids for automotive application. 43:140. 2021-01-01
Exploring a locus of maximum metal transfer stability of the short-circuiting GMAW process based on the reignition voltage peaks. 43:503. 2021-01-01
Fast crack bounds in linear elastic fracture mechanics: a new approach to establish the upper bound. 43:102-110. 2021-01-01
Fatigue limit evaluations of Al 6351-T6 by thermographic and εN methods. 43:11. 2021-01-01
Flow boiling heat transfer coefficient of DI water and nanofluids inside microscale channels under conditions near the critical heat flux (CHF). 43:308. 2021-01-01
Frequency-based damage detection method for excitation signals above work frequencies: theoretical aspects and experimental results. 43:1. 2021-01-01
Fundamental solutions and integral equations of first-order laminated composite beams. 43:13. 2021-01-01
Fuzzy diagnostics for gearbox failures based on induction motor current and wavelet entropy. 43:265. 2021-01-01
Hybrid calibration of aeronautical structures instrumented with strain-gages for load prediction. 43:1-14. 2021-01-01
Identification of CO$$_{mathrm{2}}$$ and O$$_{mathrm{2}}$$ emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering. 43:1-28. 2021-01-01
Identification of CO2 and O2 emissions dynamics in a natural gas furnace through flame images, ARMAX models, and Kalman filtering.. 43:256. 2021-01-01
Identification of active magnetic bearing parameters in a rotor machine using Bayesian inference with generalized polynomial chaos expansion. 1:43:552. 2021-01-01
Identification of heat and mass transfer parameters in timber drying based on hybrid optimisation techniques. 43:411. 2021-01-01
Improved active noise control algorithm based on the convex combination method. 43:1-12. 2021-01-01
Indentation rolling resistance in pipe conveyor belts: a review. 43:230-246. 2021-01-01
Influence of cutting speed and tool geometry on form and machine tapping of carbon fibre-reinforced composites. 43:1-9. 2021-01-01
Influence of forced oscillation, orbital motion, axial flow and free motion of the inner pipe on Taylor-Couette flow. 43:85. 2021-01-01
Influence of preheating temperature and post-weld heat treatment on microstructural and mechanical characteristics of the heat-affected zone in nodular cast irons with ferritic-pearlitic matrix. 43:381. 2021-01-01
Integral transform solution of swirling laminar flows in cylindrical cavities with rotating end walls. 43:1-16. 2021-01-01
Investigation of bubble parameters and interfacial heat transfer correlations based on radial void fraction profiles of R-134a subcooled boiling flows. 43:428. 2021-01-01
Low Mach preconditioned density-based methods with implicit Runge-Kutta schemes in physical-time. 43:341. 2021-01-01
MOVING BOUNDARY PROBLEM OF ABLATION IN A CARBON-PHENOLIC COMPOSITE USING FINITE ELEMENT METHOD. 43:509. 2021-01-01
Magnetorheological elastomer dynamic characterization method considering temperature, frequency, and magnetic field. 43:1-18. 2021-01-01
Mapping and selection of profiles for morphing wing of a flapping foil. 43:73. 2021-01-01
Microstructural characterization and mechanical properties of high-strength steel weld metals obtained by GMAW process with rotating electrode (GMAW-RE). 43:1-13. 2021-01-01
Misfire detection of an internal combustion engine based on vibration and acoustic analysis. 43:1. 2021-01-01
Modal parameters identification of a rotor-journal bearing system using operational modal analysis. 43:1-14. 2021-01-01
Modelling and simulation of water vapor adsorption in silica gel bidisperse beds. 43:1-14. 2021-01-01
Monitoring tool wear and surface roughness in the face milling process of high-strength compacted graphite cast irons. 43:1-16. 2021-01-01
Multi-objective optimization of piezoelectric vibrational energy harvester orthogonal spirals for ore freight cars. 43:295. 2021-01-01
Numerical analysis of an UAS impact in a reinforced wing fixed leading edge. 43:532. 2021-01-01
Numerical analysis of pressure distribution in a low aspect ratio wing with distributed electric propulsion. 43:1-12. 2021-01-01
Numerical assessment of finite volume schemes for incompressible viscous flows on non-staggered meshes. 43:564-587. 2021-01-01
Numerical investigation for creep curve evaluation on a twin-disc test scenario using finite elements. 43:339. 2021-01-01
Obtaining flow curve for viscoplastic fluids through inclined open-channel apparatus. 43:278. 2021-01-01
On the effects of body forces in one-dimensional consolidation of porous media. 43:330. 2021-01-01
On the use of parallel full-order state observers for damage detection in mechanical systems.. ':'-10. 2021-01-01
Optimal Earth-Moon trajectories in elliptic models: part 1 round-trip missions. 43:575. 2021-01-01
Optimization of pedicle screw position using finite element method and neural networks. 43:1-10. 2021-01-01
PID controller with novel PSO applied to a joint of a robotic manipulator. 43:1-5. 2021-01-01
Parametric study of dynamic behaviour of RC dual system design with the Brazilian Standard Code using the lumped damage model. 43:245. 2021-01-01
Performance evaluation of biogas fueled generator set. 43:409. 2021-01-01
Performance evaluation of standard second-order finite volume method for DNS solution of turbulent channel flow. 43:513. 2021-01-01
Phase-field modelling of size effect on strength and structural brittleness. 43:484. 2021-01-01
Product innovation management model based on manufacturing readiness level (MRL), design for manufacturing and assembly (DFMA) and technology readiness level (TRL). 43:360. 2021-01-01
Prototyping of absorber plate for solar collector by ISF and FSW processes. 43:1. 2021-01-01
Pulsatile flow through an idealized arterial bypass graft: an application of the constructal design method. 43:370. 2021-01-01
Pump-as-turbine for energy recovery in municipal water supply networks. A review. 43:1-23. 2021-01-01
RMD simulations of ADN and ADN/GAP-based propellant. 43:1-10. 2021-01-01
ReGear: an upper and lower limb simultaneous system for stroke rehabilitation. 43:488. 2021-01-01
Reliability-based preventive maintenance planning for corroded pipelines using a RBF surrogate model. 1:1-11. 2021-01-01
Sector modeling using iterative boundary pressure estimation. 43:49. 2021-01-01
Self-diffusion in nanofluids of nonelongated particles in the dilute limit. 43:392. 2021-01-01
Solution of two-dimensional difusion?advection problems for non-isotropic media with spatially variable velocity ield by the boundary element method. 43:1-15. 2021-01-01
Soot modeling in turbulent diffusion flames: review and prospects. 43:1-24. 2021-01-01
Spacecraft real-time thermal simulation using artificial neural networks. 43:1-17. 2021-01-01
Stability assessment of L75 lox-ethanol rocket engine. 43:486-501. 2021-01-01
Static pressure behavior of gas-liquid flows along a Venturi. 43:1. 2021-01-01
Stationkeeping controllers for Earth-Moon L1 and L2 libration points halo orbits. 43:1-20. 2021-01-01
Stochastic assessment of burst pressure for corroded pipelines. 43:1. 2021-01-01
Stress assessment in reinforcement for columns with concrete creep and shrinkage through Brazilian technical normative. 43:1-14. 2021-01-01
Study of empirical correlation between permeability and porosity with application for permeability upscaling. 43:530. 2021-01-01
Study of the behavior of the electric arc in pulsed GMAW influenced by magnetic oscillation using shielding gas mixtures with different CO2 content. 43:1-13. 2021-01-01
Study of the influence of high-energy milling time on the Cu-13Al-4Ni alloy manufactured by powder metallurgy process. 43:1-7. 2021-01-01
Superstructures optimization of absorption chiller for WHR of ICE aiming power plant repowering and air conditioning. 43:135. 2021-01-01
Support vector machines applied to torsional vibration severity in drill strings. 43:386. 2021-01-01
Surface characterization of the seating platform of titanium implant processed with different textures. 43:130. 2021-01-01
Task-space impedance control of a parallel Delta robot using dual quaternions and a neural network. 43:1-11. 2021-01-01
The effect of environment pressure in carbon-phenolic composite ablation. 43:1-16. 2021-01-01
The effect of subgrid-scale modeling on LES of turbulent coaxial jets. 43:63. 2021-01-01
The generalized Maxwell-slip friction model applied to starting of small wind turbines. 43:376. 2021-01-01
The influence of the cooling load profiles on the cogeneration conceptual design considering different timescales for building applications. 43:25-41. 2021-01-01
The motion response and hydrodynamic performance comparisons of the new subsea suspended manifold with two mooring scenarios. 43:121. 2021-01-01
Theoretical and experimental study of commercial heat sinks for personal computers. 43:1-15. 2021-01-01
Thermal aging of a polyamide 66-experimental analysis and modeling. 43:43. 2021-01-01
Thermal performance analysis of a 1-5 TEMA E shell and coil heat exchanger operating with SWCNT-water nanofluid with varied nanoparticle concentration. 43:1-14. 2021-01-01
Thermal performance of bare and finned tubes submersed in nano-PCM mixture. 43:1-14. 2021-01-01
Thermocouple positioning through capacitive discharge for temperature monitoring in laser welding. 43:468-12. 2021-01-01
Thermodynamic analysis and optimization of a multi-stage compression system for CO2 injection unit: NSGA-II and gradient-based methods. 43:1-21-19. 2021-01-01
Thermodynamical model of an atmospheric steam engine. 43:1-9. 2021-01-01
Threaded pin effects analysis on forces in FSW. 43:1-15. 2021-01-01
Upper limbs? assistive devices for stroke rehabilitation: a systematic review on design engineering solutions. 43:236-252. 2021-01-01
Ventilation mode performance against airborne respiratory infections in small office spaces: limits and rational improvements for Covid-19. 43:1-19. 2021-01-01
Viscoelastic rotors: a proposed analytical solution and results for rotors made of different materials. 43:1-12. 2021-01-01
Wavelet analysis of a flexible filament kinematics: emulating C. elegans swimming behavior. 43:207. 2021-01-01
Wind speed trends and the potential of electricity generation at new wind power plants in Northeast Brazil. 43:1-11. 2021-01-01
$${mathscr {H}}$$-matrix acoustics BEM for vocal tract configuration optimization using genetic algorithms. 42:1-11. 2020-01-01
A coupled thermo-mechanical model for the simulation of discrete particle systems. 42:387-n/a. 2020-01-01
A historical review of the theory of gravity-assists in the pre-spaceflight era. 42:406. 2020-01-01
A morphing metastructure concept combining shape memory alloy wires and permanent magnets for multistable behavior. 42:122. 2020-01-01
A new method for type synthesis of parallel mechanisms using screw theory and features of genetic algorithms. 42:1-1. 2020-01-01
A new skeletal mechanism for ethanol using a modified implementation methodology based on directed relation graph (DRG) technique. 42:105. 2020-01-01
A new way to obtain NiTi SMA superelastic meshes: investment casting followed by hot rolling. 42:1-8. 2020-01-01
A nonlinear mathematical model for dynamic analyses of a cantilevered beam with a tip-mass under support excitation. 42:1-14. 2020-01-01
A rapid distortion theory-based airfoil turbulent inflow noise prediction method. 42:397. 2020-01-01
A simplified and open-source approach for multiple-valued water surface measurements in 2D hydrodynamic experiments. 42:1-17. 2020-01-01
AT-d8sign: methodology to support development of assistive devices focused on user-centered design and 3D technologies. 42:260-278. 2020-01-01
Adhesively bonded aluminium double-strap joints: effects of patch part on failure load. 42:589. 2020-01-01
Adjusting process parameters in zamak-8 prototype tooling to obtain functional prototypes in PP. 42:362. 2020-01-01
An efficient iterative model reduction method for stochastic systems having geometric nonlinearities. 42:1-16. 2020-01-01
An evaluation of combustion aspects with different compression ratios, fuel types and injection systems in a single-cylinder research engine. 42:497. 2020-01-01
Analysis and emulation of pitch control forces in wind turbines. 42:262. 2020-01-01
Analysis of fatigue-related aspects of FCAW and GMAW butt-welded joints in a structural steel. 42:67. 2020-01-01
Analysis of magnetic fluid displacement in capillaries. 42:1-16. 2020-01-01
Analysis of the tribological performances of biodegradable hydraulic oils HEES and HEPR in the sliding of Cu-Zn/WC-CoCr alloys using the Stribeck curve. 42:1-20. 2020-01-01
Analysis of viscosity function models used in friction stir welding. 42:429-441. 2020-01-01
Assessment of adjustable damping in the ride comfort of a baja SAE vehicle. 42:583. 2020-01-01
Assessment of the grindability of Inconel 718 under different coolant delivery techniques. 42:1-9. 2020-01-01
Assessment of the performance of airflow in an operating rooms using ceiling supply and sidewall inlet systems. 42:1-13. 2020-01-01
Bending behavior of CFRP cables in the nonlinear displacement range. 42:1-7. 2020-01-01
CFD-DEM simulation of mud cake formation in heterogeneous porous medium for lost circulation control. 42:376. 2020-01-01
Cavitation resistance of tungsten carbide applied on AISI 1020 steel by HVOF and remelted with CO2 laser.. 42:1-322. 2020-01-01
Charging procedures: effects on high temperature sodium thermosyphon performance. 42:1. 2020-01-01
Chemical kinetic mechanism for diesel/biodiesel/ethanol surrogates using n-decane/methyl-decanoate/ethanol blends. 42:100. 2020-01-01
Closed-form solution for direct and inverse kinematic models of a parallel manipulator for robotic orbital welding. 42:74. 2020-01-01
Combination of temperature and electrical conductivity on semiconductor graphite/epoxy composites. 42:1. 2020-01-01
Combined effects of pitch angle, rotational speed and site wind distribution in small HAWT performance. 42:1-18. 2020-01-01
Combining classical and component-based TPA for equivalent load identification. 42:334-345. 2020-01-01
Comparing the thermodynamic performance of organic Rankine and Kalina cycles in solar energy systems. 42:597. 2020-01-01
Comparing the weldability of AA6013-T4 aluminium alloy on DP600 dual-phase steel with laser welding and resistance spot welding. 42:(2020) 42:71-12. 2020-01-01
Comparison between methods for determining the yield stress of cement pastes. 42:1-13. 2020-01-01
Comparison of the convergence rates between Fourier pseudo-spectral and finite volume method using Taylor-Green vortex problem. 42:1-10. 2020-01-01
Computational analysis of vortex rope in a hydroturbine of Tucuruí dam. 42:1-12. 2020-01-01
Computational modeling of viscoplastic polymeric material response during micro-indentation tests. 42:1/438-18. 2020-01-01
Contributions to the adaptive Monte Carlo method. 42:1-10. 2020-01-01
Cross-section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method. 42:548-548. 2020-01-01
Crushing simulation using an energy-based damage model. 42:296. 2020-01-01
DYNAMIC ANALYSIS OF A PIPE CONVEYING A TWO-PHASE FLUID CONSIDERING PARAMETRIC AND NON-PARAMETRIC UNCERTAINTIES. 42:1-15. 2020-01-01
Damage propagation using novel G/XFEM strategies: computational aspects and numerical investigations. 42:1-14. 2020-01-01
Data-driven identification of rotating machines using ARMA deterministic parameter evolution in the angle/time domain. 42:478. 2020-01-01
Development and application of a miniaturized tensile testing device for in situ synchrotron microtomography experiments. 42:94-yy. 2020-01-01
Development of a simple ER damper model for fault-tolerant control design. 42:502. 2020-01-01
Development of an orthopedic system for physiotherapy and rehabilitation of the leg. 42:27. 2020-01-01
Development of controlled heating for fatigue test in overhead conductors at high temperature. 42:17-31. 2020-01-01
Diffusion-bonded pulsating heat pipes: fabrication study and new channel proposal. 42:466. 2020-01-01
Discrete optimization for positioning of actuators and sensors in vibration control using the simulated annealing method. 42:101. 2020-01-01
Dynamic analysis of a pipe conveying a two-phase fluid considering uncertainties in the flow parameters. 42:626. 2020-01-01
Dynamic mechanical characterization of epoxy-based thermosetting materials loaded with lignin. 42:1/394-17. 2020-01-01
Dynamic modeling of cables with external forces applied to the terminal load. 42:472. 2020-01-01
Dynamics of an Euler-Bernoulli Beam on Nonlinear Viscoelastic Foundations: a Parameter Space Analysis. 42:608. 2020-01-01
Dynamics of an articulated chain of rigid pipes discharging fluid under concomitant support excitation: A numerical analysis. 42:1-15. 2020-01-01
Effect of intralaminar hybridization on mode I fracture toughness of natural fiber-reinforced composites. 42:2-8. 2020-01-01
Effect of microfin surfaces on boiling heat transfer using HFE-7100 as working fluid. 42:1-13. 2020-01-01
Effect of transverse arc oscillation on morphology, dilution and microstructural aspects of weld beads produced with short-circuiting transfer in GMAW. 42:449. 2020-01-01
Effects of TiC formation in situ by applying titanium chips and other ingredients as a flux of tubular wire. 42:1. 2020-01-01
Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths. 42:373-388. 2020-01-01
Effects of tool path strategies and thermochemical treatments on the surface roughness of hardened punches for hot stamping. 42:1-15. 2020-01-01
Enabling high conductance and high energy density in supercritical fluids for thermal storage applications. 42:529. 2020-01-01
Energy dissipation analysis of oil wells sucker rod string. 42:1-10. 2020-01-01
Energy efficiency in Brazilian industrial plants: knowledge management and applications through an expert system. 42:557. 2020-01-01
Energy, exergy, and exergoeconomic evaluations of a micro-trigeneration system. 42:1-16. 2020-01-01
Equivalent mechanical model of rectangular container attached to a pendulum compared to experimental data and analytical solution. 42:143. 2020-01-01
Estimating Lyapunov Spectrum on Shape Memory Alloy Oscillators Considering Cloned Dynamics and Tangent Map Methods. 42:475. 2020-01-01
Estimation of Slip Flow Parameters in Micro-scale Conjugated Heat Transfer Problem. 42:1-10. 2020-01-01
Estimation of the surface area-to-volume ratios of litter components of the Brazilian rainforest and their impact on litter fire rate of spread and flammability. 42:266-276. 2020-01-01
Estimation of tire-road friction for road vehicles: a time delay neural network approach. 42:1-12. 2020-01-01
Evaluation of a solar-powered absorption cooling system to a data center. 42:259. 2020-01-01
Evaluation of ethanol as additive for NO x and PM reduction in CI engines fueled with diesel?biodiesel blends using a pump assembly. 1:1-12. 2020-01-01
Evaluation of localized pool fire models to predict the thermal field in offshore topside structures. 42:1-15. 2020-01-01
Evaluation of the efficiency of a heat recovery steam generator via computational simulations of off-design operation. 42:569-569-18. 2020-01-01
Experimental investigation about composite bearing strength. 42:345. 2020-01-01
Experimental study of the influence of the swirl number on lean premixed combustion regimes. 42:210. 2020-01-01
Fatigue life estimation of hydrokinetic turbine blades. 42:1-14. 2020-01-01
Flow boiling heat transfer of R134a in a 500 µm ID tube. 42:254-254. 2020-01-01
Fluidization of binary mixtures of biomass and coal with sand: an experimental study. 42:289. 2020-01-01
Fuzzy clustering and AR models for damage detection in CFRP coupons considering loading effect. 42:241. 2020-01-01
Generalized Polynomial chaos expansion applied to uncertainties quantification in rotating machinery fault analysis. 42:42:610. 2020-01-01
Generalized integral transform solution for free vibration of orthotropic rectangular plates with free edges. 42:183. 2020-01-01
Global performance criterion of robotic manipulator with clearances based on reliability. 42:624. 2020-01-01
Helicopter stability and control derivatives identification in different flight conditions. 42:56. 2020-01-01
History matching of experimental polymer flooding for enhanced viscous oil recovery. 42:1-16. 2020-01-01
Hybrid model-based and data-driven wind velocity estimator for an autonomous robotic airship. 42:1. 2020-01-01
Image-based measurement system for regular waves in an offshore basin. 42:299. 2020-01-01
Impedance control as an optimal control problem: a novel formulation of impedance controllers as a subcase of optimal control. 42:513. 2020-01-01
Impedance-based structural health monitoring applied to steel fiber-reinforced concrete structures. 42:1-15. 2020-01-01
Improved localization in a corn crop row using a rotated laser rangefinder for three-dimensional data acquisition. 42:592. 2020-01-01
Improving the precision of discrete numerical solutions using the generalized integral transform technique. 42:329. 2020-01-01
Infiltration tests to assess the permeability and hydraulic conductivity of 3D printed plaster parts under different conditions. 42:175. 2020-01-01
Influence of coated surfaces and gap size on boiling heat transfer of deionized water. 42:127. 2020-01-01
Influence of tool vibrations on tool wear mechanisms in internal turning of hardened steel. 42:370-385. 2020-01-01
Investigation of MEMS as accelerometer sensor in an Implantable Centrifugal Blood Pump prototype. 42:486-487. 2020-01-01
Kriging-based multiobjective optimization using sequential reduction of the entropy of the predicted Pareto front. 42:550. 2020-01-01
Limitations of simplified models to predict soot formation in laminar flames. 42:340. 2020-01-01
Linear modeling of alternative active magnetic bearings with four interconnected poles and distributed windings. 42:165. 2020-01-01
MWCNT and COOH-MWCNT aqueous nanofluids: thermophysical and rheological characterization. 42:439-460. 2020-01-01
Machining of Inconel 718 with a defined geometry tool or by electrical discharge machining. 42:1-14. 2020-01-01
Manufacturing and characterization of porous ceramic capillary membranes for enzyme functionalization through click chemistry. 42:170. 2020-01-01
Mathematical modelling of the solar-driven steam reforming of methanol for a solar thermochemical micro-fluidized bed reformer: thermal performance and thermochemical conversion. 42:447. 2020-01-01
Measuring and comparing the ignition delay time of the reference diesel, convectional diesel, additive ethanol and biodiesel from soybean oil using a shock tube. 42:102. 2020-01-01
Mechanical and emissions performance of a diesel engine fueled with biodiesel, ethanol and diethyl ether blends. 42:1-10. 2020-01-01
Mechanical properties of biocompatible Y-TZP/Al2O3 composites obtained from mechanically alloyed powders. 42:1-8. 2020-01-01
Modelling and control strategies for a motorized wheelchair with hybrid locomotion systems. 43:1-15. 2020-01-01
Modelling of a Brazilian ethanol plant: impact of the bagasse use and the ethanol dehydration on energy efficiency and sustainability. 42:568. 2020-01-01
Modelling of a turbulent lean premixed combustor using a Reynolds-averaged Navier-Stokes approach. 42:213. 2020-01-01
Nonlinear analysis of reinforced concrete beams submitted to bending moment gradients considering the variable adhesion model. 42:29-330. 2020-01-01
Numerical analysis of the influence of magnetic field waveforms on the performance of active magnetic regenerators. 42:378. 2020-01-01
Numerical and experimental analysis of fretting fatigue performance of the 1350-H19 aluminum alloy. 42:1-13. 2020-01-01
Numerical and experimental investigation of the dynamic behavior of a cantilever beam driven by two non-ideal sources. 42:516. 2020-01-01
Numerical approach of free and forced elastic vibrations using high-regularity Hermitian partition of unities. 42:120-139. 2020-01-01
Numerical evaluation of effects of the isolator height and the leading-edge bluntness on a scramjet inlet. 42:275-288. 2020-01-01
Numerical experiments of the flow around a bluff body with and without roughness model near a moving wall. 42:129. 2020-01-01
Numerical investigation of material properties and operating parameters effects in generating motorcycle break squeal using the finite element method. 42:1-16. 2020-01-01
Numerical modeling of flow stress and grain evolution of an Mg AZ31B alloy based on hot compression tests. 42:1-11. 2020-01-01
Numerical simulation of the steam reforming of toluene in a fixed-bed catalytic reactor to produce hydrogen. 42:100-114. 2020-01-01
Numerical simulation of wetland hydrodynamics and water quality. 42:1-15. 2020-01-01
Numerical study of the laminar premixed flame stabilization on a slot burner: comparison between detailed and FGM models. 42:---. 2020-01-01
Numerical technique for strain localization analysis considering a Cartesian parameterization. 42:145. 2020-01-01
On dynamic modeling of industrial gas turbines based on low calorific value (LCV) gaseous fuels. 42:238. 2020-01-01
On the dynamics of flame images identified through computer vision and modal methods. 42:1-15. 2020-01-01
On the effect of the mounting angle on single-path transit-time ultrasonic flow measurement of flare gas: a numerical analysis. 42:1-18. 2020-01-01
On the effects of thermodynamic assumptions and thermoeconomic approaches for optimization and cost allocation in a gas turbine cogeneration system. 42:1-18/323. 2020-01-01
On the machinability of the Ni-30 high-temperature iron-based superalloy. 42:503-513. 2020-01-01
On the robustness of a model-based inverse force identification applied on a structure submerged in different media. 42:511. 2020-01-01
On the upscaling approach to wind tunnel experiments of horizontal axis hydrokinetic turbines. 42:1. 2020-01-01
One-dimensional scalar wave propagation in multi-region domains by the boundary element method. 42:134. 2020-01-01
Optimal design of multi-DOF viscoelastic dynamic neutralizers for passive vibration control in rotordynamics. 42:621. 2020-01-01
Optimizing strain energy extraction from multi-beam piezoelectric devices for heavy haul freight cars. 42:59. 2020-01-01
Parameter adjustments for optimizing signal integration using the FFT-DDI method. 42:104. 2020-01-01
Performance analysis of direct absorption-based parabolic trough solar collector using hybrid nanofluids. 42:573. 2020-01-01
Performance comparison of seeded-gel and CBN grinding wheels for cylindrical plunge grinding of 100Cr6 steel. 42:596. 2020-01-01
Plugin energy penalty model and gypsum production for flue gas desulfurization prediction. 42:168. 2020-01-01
Positional finite element formulation for two-dimensional analysis of elasto-plastic solids with contact applied to cold forming processes simulation. 42:245. 2020-01-01
Predictive equation for a circular trajectory period in a cable-driven robot for rehabilitation. 42:279. 2020-01-01
Predictive thermodynamic model of the performance of a stationary spark-ignition engine running on natural gas. 42:411-426. 2020-01-01
Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection. 42:42-75. 2020-01-01
Pressure and shear stress analysis in a normal triangular tube bundle based on experimental flow velocity field. 42:1. 2020-01-01
Primary atomization of a turbulent liquid jet in crossflow: a comparison between VOF and FGVT methods. 42:1-13. 2020-01-01
Pumped hydro storage plants: a review. 42:415. 2020-01-01
Quantifying interfacial parameters of upward and downward annular flow condensation from high-speed visualization. 42:158. 2020-01-01
Reactivity controlled compression ignition with triple injection fuel: ethanol-diesel-ethanol. 42:401. 2020-01-01
Reactivity-controlled compression ignition (RCCI) with double direct injection of diesel and hydrous ethanol. 42:64. 2020-01-01
Rheological properties of a cross-linked gel based on guar gum for hydraulic fracture of oil wells. 42:--498. 2020-01-01
Robust project of resonant shunt circuit for passive vibration control of composite structures. 42:342. 2020-01-01
Robust topology optimization for heat conduction with polynomial chaos expansion. 42:284-300. 2020-01-01
SGFEM: a numerical investigation of the two-scale simulation of 3D elastic fracture. 42:1. 2020-01-01
Sensitivity study of momentum and turbulence models for subcooled boiling phenomena simulation. 42:435. 2020-01-01
Shakedown analysis of porous materials via mixed meshless methods. 42:1-13. 2020-01-01
Sheet metal joining process selector. 42:226. 2020-01-01
Shelf-life analysis of solid rocket engine using HTPB/AP based on kinetic-chemical parameters of DSC analysis and burn on a test bench. 42:1-18. 2020-01-01
Simulating squirmers with volumetric solvers. 42:547. 2020-01-01
Static loads evaluation in a flexible aircraft using high-fidelity fluid-structure iteration tool (E2-FSI): extended version. 42:79. 2020-01-01
Study of effects of ignition improvers on ethanol compression ignition in the rapid compression machine. 42:1. 2020-01-01
Study of the effects of the laser remelting process on the microstructure and properties of the WC-10Co-4Cr coating sprayed by HVOF. 42:1-127. 2020-01-01
Synthesis of TiN and TiO2 thin films by cathodic cage plasma deposition: a brief review. 42:01. 2020-01-01
The influence of volume variation in a homogeneous prechamber ignition system in combustion characteristics and exhaust emissions. 42:1. 2020-01-01
The role played by the flexible polymer polyacrylamide (PAM) and the rigid polymer xanthan gum (XG) on drag in Taylor-Couette geometry: from Taylor?s vortexes to fully turbulent flow. 42:392-403. 2020-01-01
The use of a general convected time derivative to compute the Reynolds stress tensor for a compressible turbulent flow. 42:1-12. 2020-01-01
The use of ethanol to determine the volume of a pycnometer used to measure the density of liquids at different temperatures and pressures. 42:1-11. 2020-01-01
Thermoeconomic evaluation of three proposals for the energy cogeneration unit powered by natural gas, biogas, or syngas. 42:1-16. 2020-01-01
Toward an ultrasonic inspecting method to detect and classify adhesive bonding defects in real time: a numeric study. 42:240. 2020-01-01
Transient envelope current analysis for inter-turn short-circuit detection in induction motor stator. 42:00/0000-10. 2020-01-01
Using artificial neural networks to represent a diesel-biodiesel engine. 42:1-12. 2020-01-01
Vibro-impact model and validation of the axial dynamics of a vibration-assisted drilling tool. 42:1-16. 2020-01-01
Viscoplastic effects on plane strain fracture of FCC and BCC single crystals. 42:1-8. 2020-01-01
Wake behavior analysis for two circular cylinders placed at several angles to the flow. 42:441. 2020-01-01
Wave scattering from discontinuities related to corrosion-like damage in one-dimensional waveguides. 42:521. 2020-01-01
Wind farm layout optimization based on CFD simulations. 42:433. 2020-01-01

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (IMPRESSO)

Visão geral

Qualis

código do país

tipo

publicação venue de

tem uma área de assunto

publisher

is open access

is in DOAJ

Metrics

2 year mean citedness

H index

i10 index

Identidade

ISSN-L

openalex identifier

International Standard Serial Number (ISSN)